• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.917-922
• /
• 2005

The wastewaters from textile and dyeing industries are difficult to treat due to its high pH, temperature, color intensity and non-biodegradable organic contents. This study investigated the removal of recalcitrant organics in a dyeing wastewater by using a packed bed reactor (PBR) that contained cell-immobilized pellets. The feed, obtained from an effluent of a biological treatment plant, had $SCOD_{Cr}$ of 330 mg/L and $SBOD_5$ of 20 mg/L on average. In immobilizing the cells to a Polyethylene Glycol(PEG) based medium, activated sludges from either a sewage treatment plant or an industrial wastewater treatment plant were used. When the empty bed contact time (EBCT) was above 8 hrs in the PBR, the $COD_{Cr}$ removal efficiency was over 50% and the $COD_{Mn}$ concentration was 72 mg/L or lower on average, which was substantially lower than the discharge standard of 90 mg/L. The results indicated that the optimum EBCT in the PBR was 8 hrs. The PBR with cell-immobilized pellets was effective as an advanced treatment process after an activated sludge process for treating dyeing wastewaters.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.55-66
• /
• 2016

This study was aimed to characterize the color of cotton fabric dyed with three different natural resources such as persimmon, citrus, and brown algae and to propose new trend color themes for fashion color planning for newborn and toddler wear. A variety of color shades by dyeing cotton fabric with persimmon, citrus, and brown algae respectively was obtained and each color was also determined if it could be matched with one of Pantone TPX considering authorized color trends for 2016 Spring/Summer. Finally a group of new trend color theme for 2016S/S newborn and toddler wear were proposed for naturally dyed cotton fabric. As results, the three natural dyeing resources gave color gamut with hue ranging from Purple Blue to Green Yellow and with tones including pale, light grayish, soft, grayish, and dull by their single and compound dyeing. A total of 23 colors matched to Pantone TPX were considered for the fashion color planning by natural dyeing. The selected natural colors were grouped as three different color ways and thereafter the color ways were differentiated in terms of representative color sensibility by using subjective evaluation. Finally three characterized color themes were proposed as 'Serenity', 'Juicy', and 'Fancy', each of which has tried to express differentiated feeling of each natural resources for dyeing, to follow up to global color trends, and to contribute to newborn and toddler wear's own requirements and marketability. These results suggest that natural dyeing colors could be applied into fashion color planning in current fashion industries in order to produce more sensible and emotional design of fashion goods using natural dyeing.

• Microbiology and Biotechnology Letters
• /
• v.38 no.1
• /
• pp.32-39
• /
• 2010

This study was carried out to investigate the usefulness of the natural antimicrobial substances for natural dyeing. Antimicrobial activity of natural substances, extracted by water, ethanol, methanol and ethyl acetate, were shown over 20 mm by Rheum palmatum, Caesalpinia sappan, Prunus mume, Schizandra chinensis, Rhus javanica, and Coptis japonica. Especially, water and methanol extract of C. japonica were shown strong antimicrobial activity against all investigated strains. Minimum inhibition concentration of C. japonica water extract was investigated 110 mg/mL for Staphylococcus aureus ATCC 6538. Investigated natural substances were not only shown strong antimicrobial activity for natural dyeing but also might be used other industries.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.33-42
• /
• 2022

Growing industrialization leads to severe water pollution. Organic effluents from pharmaceuticals and textile industries released in wastewater adversely affect the environment and human health. Presence of antibiotics used for antibacterial treatment in wastewater leads to the growth of drug resistance bacteria, which is very harmful for human being. Various small organic molecules are used for the preparation of organic dye molecules in the textile industries. These molecules hardly degrade, which is present in the wastewater effluents from printing and dyeing industries. In order to address these problems, photoactive catalyst is embedded in the membrane and wastewater are passed through it. Through this process, organic molecules are photodegraded and at the same time, the degraded compounds are separated by the membrane. Titanium dioxide (TiO₂) is a semiconductor which behave as excellent photocatalyst. Photocatalytic ability is enhanced by the making its composite with other transition metal oxide and incorporated into polymeric membrane. In this review, the degradation of dye and drug molecules by photocatalytic membrane are discussed.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.75-82
• /
• 2008

The optimum extraction conditions of green tea used for a bath were investigated for application to textiles. The stability of the extracts and content of active ingredients were analyzed as well. The extraction was more effective in water and methanol than in ethanol. The optimum extraction temperature was determined as $80^{\circ}C$ in water and $60^{\circ}C$ in methanol. The solid extracts were obtained about 7% in water and 9% in methanol on the weight of dry green tea. The extracts were more stable in acid and neutral conditions than in alkaline region. From the analysis of contents of active ingredients, about 20% of effective catechins was appeared to be contained in the extract solid, which was thought to be available for application to textiles.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.19-19
• /
• 2012

최근 산업환경 변화에 순응하는 환경 친화적 소재를 사용하여 자동차, 선박, 철도 등 수송용 인테리어 내장재를 구성하는 기술로서, 난연성 및 기계적 물성 유지 기술, 그리고 실내 쾌적감을 부여하기 위한 감성기술 및 심미적 요소를 부여하는 디자인 기술이 가미된 복합 기능화 기술개발이 구되고 있다. 기존의 자동차용 시트 제품은 대부분 PU Foam을 시트원단에 불꽃으로 Lamination 하는 방식으로 제조되었으며, 이러한 제조 방식은 많은 공정을 거치게 되고 PU Foam을 제조하는 공정 및 불꽃으로 Lamination 하는 공정에서 많은 환경유해가스가 발생하는 등 환경적으로도 많은 문제점을 감수하면서 생산하는 방식이다. 또한 각종 원단의 표피재로 많이 사용되고 있는 PU와 PVC의 경우 제조과정에서 용제와 가소제 사용 등으로 인해 환경적으로 많은 문제점이 있으며, 이를 대체하기 위한 노력이 많은 부분에서 이루어지고 있지만, 마땅히 대체할 소재를 찾지 못하고 있는 실정이다. 본 연구에서 제안하는 실리콘수지는 기존의 PU와 PVC를 대체할 수 있는 소재로서 각광받고 있으며, 응용기술 개발을 통해 충분히 적용이 가능한 소재라고 판단된다. 본 연구에서 개발하고자 하는 기술은 난연성을 가진 실리콘 내장 표피재에 불꽃으로 Lamination하는 공정을 배제한 친환경 PUD Foam을 바로 Back Coating함으로써 일체형 고 기능 친환경 제품을 개발함으로써 친환경 복합화 기술 및 SEAT 원단과 표피재의 일체형 모듈화 공법개발을 이루고자 한다.

• KSBB Journal
• /
• v.28 no.5
• /
• pp.295-302
• /
• 2013

Indigo is utilized in various industries including textile dyeing, cosmetics, printing and medicinal products and its reduced form, leuco-indigo, is mainly used in these process. Chemical reducing agent (sodium dithionite, sodium sulfide, etc.) is preferred to use for the formation of leucoindigo in industry. In traditional indigo fermentation process, microorganisms can participate in the reduction of indigo and thus it has been known to reduce environmental pollution and noxious byproducts. However, in fermentation method using microorganisms it is difficult to standardize large scale production process due to low yield and reproducibility. In this study, we attempted to develop the indigo reduction process using microbial flora which was isolated from naturally fermented indigo vat or deduced by metagenomic approach. From the results of library analyses of PCR-amplified 16S rRNA genes from the traditional indigo fermentation vat sample (metagenome), it was confirmed that Alkalibacteriums (71%) was distinctly dominant in population. Some strains were identified after confirming that they become pure culture in nutrient media modified slightly. Four strains were separated in this process and each strain showed obvious reducing ability toward indigo in dyeing test. It is expected that the analyzed results will provide important data for standardizing the natural fermentation of indigo and investigating the mechanism of indigo reduction.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.359-374
• /
• 2017

The objective of this study was to compare business management indicators among textiles and fashion companies. Business management indicators of 356 textiles and fashion companies for the year 2015 were analyzed, using income statements showing their management results. The results were as follows. First, there were statistically significant differences between the operating income ratios of textiles and fashion companies for the term, but there were none when it came to net income ratio. Second, the differences between cost of goods sold, cost of finished goods sold, and cost of merchandise sold to sales ratios among textiles and fashion companies were all statistically significant. The cost of goods sold, cost of finished goods sold, and cost of merchandise sold to sales ratios were higher for fiber and thread companies, fabric companies, and dyeing and finishing companies than for clothing and fashion accessories companies. Third, there were statistically significant differences between the ratio of salaries and the ratio of advertising expenses among textiles and fashion companies. The salaries ratios and advertising expenses ratios for clothing companies were higher than those of fiber and yarn companies, fabric companies, and dyeing and finishing companies. This study is meaningful as it has identified the business characteristics of textiles and fashion companies using the management indicators of those companies, which have not been sufficiently explored by previous studies. It has also helped to improve understanding of the industrial structure of the upstream and midstream sectors of the textiles and fashion industries.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.373-381
• /
• 2011

This study focused on investigating factors of partnership formation for transactional enterprises on supply chain to form a transactional relationship centering around textile industry in Daegu and Gyeongbuk. The study also investigated the effect of the factors of partnership formation for mutual cooperation among textile manufacturers in Daegu and Gyeongbuk on partnership outcomes, and finally provided basic information that help enterprises form efficient partnership relationships with related manufacturers. The sample of the study was manufacturers of yarn, dyeing, weaving, process and fabrics in Daegu and Gyeongbuk that are registered on Korea Federation of Textile Industries. The total of 81 responses were used for data analyses, and factor analyses, regression analyses, and ANOVA were utilized appling SPSS 14.0 Package. The results of the research were as follows: First, among partnership formation factors mutual confidence was highly related to presentation of exclusive technological information, efforts to keep relationships between enterprises, presentation of information, and transactions between reliable enterprises that were formed despite of any losses. Second, it was also important that enterprises exchange and communicate their business goals with partners by having common goals. Third, it was also important that problems and damages were informed to and were shared with transaction companies. If conflicts between enterprises occurred, they can be smoothly solved based on the partnership formation. Fourth, enterprises form partnerships with transaction companies by considering their operation abilities. Fifth, transactions with enterprises which are mutually reliable and have superior technology and information contributed a lot to economic outcome. Lastly, the study revealed that among partnership formation factors mutual confidence to transaction companies influenced outcome of mutual confidence profit creation, outcome of technology & information efficiency were closely related to the ability to solve generated problem, and an important factor of the outcome of technology & information profit creation was communication.