• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.593-602
• /
• 2018

The purpose of this study was to investigate the coloring properties of non-mordant dyes by examining local literature on silk fabric dyeing using red-colored natural dyes. Natural dyes can be prepared from the following 8 materials: purple-fleshed sweet potato, Impatiens balsamina, mulberry, fruits of Ligustrum japonicum Thunb, guava leaves, dansam, hibiscus flowers, and pruned branches of Prunus persica. To examine the surface color calculated $L^*$, $a^*$, $b^*$, ${\Delta}E^*$, and K/S value and H V/C. The variables considered in the dyeing experiment were dye concentration, dyeing temperature, dyeing time, and number of dyeing iterations, which were varied to evaluate the dyeing properties and color characteristics. As a result, the abovementioned variables, dye affinity, and red color expression were directly proportional to one another. In this study, it was found that red coloring can be obtained with natural dyes; moreover, excellent dyeing was achieved without the need for repeated dyeing or mordanting processes, which cause environmental pollution.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

• 보존과학연구
• /
• s.26
• /
• pp.77-101
• /
• 2005

In ancient times, many kinds of difference inorganic and organic pigment were used as colorants for making objects. This study has proved the damage regions on the aging conditions of the silk dyeing traditional pigment. so whiteness, tensile strength and digital-microscope were measured to examine the state of silk dyeing traditional pigments pretreated under each aging condition. From the result examining the state, all the silk dyeing traditional pigments were best condition at low temperature(-20/RT)and normal condition and damaged at high temperature($60^{\circ}C$) and 2ppm $SO_2$condition and UV condition. As a result of X-ray diffraction analysis of crystalline structure for the silk dyeing traditional pigments, most of specimens have nearly changed crystalline structure despite specimens had each other different conditions and times. Especially, specimens which was passing of 4-8 months have not changed in its crystalline structure. But some specimens like a Unghwang and Seokcheong have a little changed in its intensity in the XRD peak. Consequently, If we want to find out alteration of crystalline structure for the silk dyeing traditional pigments using scientific method according to change of environmental conditions, we must guarantee of equal state and strengthen of environmental conditions in specimen. Additionally, the term of experiment need to belong, and specimens which was experimented and analyzed must be same.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.279-285
• /
• 2005

In order to activate the characteristics of charcoals in fiber systems, this study was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on silk fabrics. The results obtained were as follows; The silk fabrics were dyed with gray color by charcoals effectively. The K/S value, that is indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Te dyeing effects were the highest with 50%(o.w.f.) of charcoals at $100^{\circ}C$ for 120 minutes in this experiments, It was observed the surfaces of silk fibers were mainly adcorbed with charcoal powders of the particle size from two micrometers to four micrometers by scanning electron microscope. Dyed silk fabrics showed comparatively low fastness to the fade of launding, the stain of the treatment of perspirations, and the strain of water fastness test, but good fastness to the stran of laundering, te drycleaning, the fade of treatment of perspirations, and the fade of water fastness test. In connection with the functional properties of dyed fabrics, the deodorizations were drastically improved, and the far-infrared emissions improved highly, and also the antibacterials were comparatively good.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.52-57
• /
• 1992

Using the new type auxiliary(K-1), dyeing experiment was done at the various dyeing conditions and the effects of auxiliary on the dyeing properties of acid milling dye for the silk fiber were dicussed. The results obtained were as follows; 1. The exhaust rate of acid milling dye was increased according to the auxiliary concentration at dyebath pH 7, But the increasing tendency of exhaust rate was decreased above auxiliary concentration 3% o. w. f.. 2. It was the same tendency of exhaust rate at dyebath pH 5, but the diffusion was more powerful at dyebath pH 7 than pH 5. 3. The decreasing ratio of exhaust rate according to dye concentration increasing was lower at auxiliary addition than auxiliary non-addition. 4. The exhaust rate curve according to increasing dyeing temperature showed the inflection point at auxiliary non-addition, but it was not observed in auxiliary addition. Consequently, it seems to be avoid that the occurrence of uneven dyeing at auxiliary addition.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.380-390
• /
• 2005

The effect of high purity chitosan was studied on its application to the natural dyeing using Rhusjara ica. In the dyeing experiment, examinations were introduced on the difference between the chitosan treated fabrics and chitosan untreated fabrics, and on the difference according to the type of mordanting agents and the mordanting methods. Dyeing was carried out for the chitosan treated and untreated fabrics under the conditions of non-mordanting and Al, Sn, Fe mordanting. As a result, we found that, in the case of cotton, chitosan untreated fabrics were not dyed enough, and the dyeing effect was not developed even though the mordanting was introduced. However, the chitosan treated fabrics developed excellent dyeing result even in the non-mordanting case. Through the results of cotton fabric dyeing, it was presumed that the dyeing affinity of the chitosan toward the Rhusjara ica, which prefer specific dyestuff (mainly black color), is selectively high. In the case of nylon, the dyeing effect is not developed easily under all conditions regardless of the chitosan treatment or the mordant treatment. It was inferred that a certain portion of the Rhusjara ica dyestuff made direct bonding with the functional elements in the nylon molecules without the help of the mordant. Through the results of nylon fabrics, it was presumed that some functional elements of the nylon molecules had selective affinity toward the specific colorant (mainly yellow color) of the Rhusjara ica.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.237-244
• /
• 2018

Three super hydrophobic red fluorescence dyes were selected to dye high molecular weight polyethylene fiber. Their absorbance and emission spectra were obtained and Stokes' shift was measured. Fluorescence emission strength of the dyes on the fiber was investigated and therefore Fluoro Red 3 was determined as the best one among those three dyes in this experiment. Dyeing properties and fluorescence intensities were investigated using the Fluoro Red 3 on high molecular weight polyethylene fiber at various dyeing conditions. The optimum concentration of a dispersing agent was appeared at 10wt% in aqueous solution. The best dyeing was obtained at $125^{\circ}C$ for 1 hour. The color fastnesses to the washing and rubbing were as high as ratings 4~5, however, the fastness to light was exhibited ratings 2~3.