• Journal of ILASS-Korea
• /
• v.18 no.3
• /
• pp.132-139
• /
• 2013

Smoke emissions from light duty diesel vehicles were measured using light extinction method with the free acceleration test mode. The smoke emissions for each measurement cycle of the free acceleration method showed large variations according to driver's pedal pushing pattern. The smoke values for each measurement cycle initially increased and reach a peak value. Integration of the smoke emissions with time for each measurement cycle was performed to get a representative smoke value which was obtained by averaging the integrated results. Two kinds of integration time range were used. One is range over the whole measurement cycle of the free acceleration method. The other is only the acceleration range in the measurement cycle. Overall, variation of the representative smoke values obtained by the integration method was reduced comparing to the traditional representative smoke value which was obtained from a peak smoke value over the measurement cycle. Ten vehicles of the same model with 2.5 liter diesel engines, and seven vehicles of the same model with 2.7 liter diesel engines, were tested using the free acceleration test method.

• Journal of Korean Academy of Nursing
• /
• v.28 no.2
• /
• pp.392-402
• /
• 1998

By using Q-methodology, this study examines the attitudes of pregnant womens' husbands toward breastfeeding. Also, the research provides basic data necessary to develop a strategy for recommending breastfeeding. A total of 112 items for the Q-population were collected from related literature and interviews with the general public, specialists, pregnant women and their husbands. Finally, 38 statements were selected. Twenty one husbands of pregnant women classified these statements on each card on a 1 to 9 point scale(forced normal distribution) and wrote the reasons for both the most supported and the most resisted statements. The materials collected were analyzed by using pc QUANL program. The analysis drew down following fact that even though the attitudes of the husbands of pregnant were very similar, they could be classified to three types according to the motivation and recognition the degree of choosing breastfeeding. Type 1 is the mother's duty supporter, who insists that breastfeeding is completely natural and the proper duty of the mother. Type 2 is the emotional value supporter, who thinks that breastfeeding emotionally affects both the baby and the mother in a positive way. Type 3 is the conditional choice supporter, who chooses the most proper suckling way of feeding according to given conditions.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.397-402
• /
• 2015

SCR has been popularly approved as one of the most effective means for NOx emission control in heavy-duty and medium-duty vehicles currently. However, high urea dosing would lead to ammonia slip. And $NH_3$ sensor for vehicle emission applications has not been popularly used in real applications. This paper presents experimental studies on the diesel engine urea-SCR system by using a double NOx sensor system that is arranged in the downstream of the SCR catalyst based on ammonia cross-sensitivity. It was shown that the NOx conversion efficiency rised as $NH_3/NOx$ increases and the ammonia slip started from the $NH_3/NOx$ equal to 1.4. The increase of temperature caused high improvement of the SCR reaction rate while the space velocity had no obvious change. The ammonia slip was in advance as catalyst temperature or space velocity increase and the ammonia storage reduced as catalyst temperature or space velocity increase. The NOx real-time conversion efficiency rised as the ammonia accumulative storage increase and reached the maximum value gradually.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.474-481
• /
• 2005

In this study, modeling and optimization work were performed to obtain nearly pure anhydrous ethanol from aqueous ethanol mixtures using benzene as an entrainer. NRTL liquid activity coefficient model was adopted for phase equilibrium calculations and PRO/II with PROVISION 6.01, a commercial process simulator, was used to simulate the azeotropic distillation process. We used the total reboiler heat duties as an objective function and the concentration of ethanol at concentrator top as a manipulated variable. As a result, 76 mole percent of ethanol at concentrator top gave an optimum value which minimized the total reboiler heat duties of three distillation columns.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4889-4902
• /
• 2018

It is a challenging issue to improve the energy efficiency of neighbor discovery in WSNs. This paper proposes an optimal discovery model (ODM) for the first time. Based on the model, we investigate the influence of the relative size of two unequal active slots on the energy efficiency. ODM provides the energy optimal value of the length of the larger active slot at a given duty cycle. Other than existing methods, the worst-case latency bound of ODM is only one period. This is a subversive conclusion, because almost all other related methods are based on a wake-up schedule that contains several periods. We theoretically deduce that ODM can reduce worst-case discovery latency by 43.89% compared to Searchlight-Trim when their duty cycles are the same. The simulations verify the advantage of ODM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.137-146
• /
• 2016

An increase in EGR rate can reduce NOx emissions. On the other hand, an excessive EGR rate is a major cause of incomplete combustion. Precise position control of the EGR valve that is optimized for the operating conditions of the engine should be supported to meet the strict emission regulations. Accordingly, this study performed mathematical modeling and control theory for characteristic analysis of an EGR valve motor. Because it is a step for controlling the position of the EGR valve motor using the Microchip development tool, this study analyzed the characteristics of the motor for each opening and closing section according to the input value of the duty ratio of PWM (Pulse Width Modulation).

• Journal of the Korean Society of Food Culture
• /
• v.20 no.6
• /
• pp.668-674
• /
• 2005

This study was carried out to investigate preference and perception of seafood among soldiers on cook's duty in military meal service. 58.9% of the respondents answered that they liked seafood and the major eating place were in their home(48.0%) and in the restaurant(40.4%). The favorite seafood cooking methods turned out to eat as raw fish, to grill, to stew, to fry in order. In comparison with the meat dishes, seafoods were considered superior to meat in nutritional value but evaluated inferior to meat in the aspects of sanitation and tasteless problem. 32.9% of the respondents answered they liked seafood dishes in military meal service and they disliked them because of taste or cooking method of the seafood. They liked fried or grilled seafood in military meal service. The plate waste amounts of the seafood menu were more than half in almost every surveyed menu and reasons for plate waste were fish smell and taste problems. The difficulties of cooking seafood in military meal service were breaking down of seafood during cooking and complexity of cooking. They scored seafood higher than average in nutrition, taste, diversity of cooking method and aspect of health. On the basis of the results above, introducing diverse cooking methods and menu are suggested and education of cooking skills and development of cooking facilities are needed in military meal service.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.193-198
• /
• 2015

This study analyzed the total number of 19,636 patients and radiation technologists, 11,433 of male and 8,203 of female by examined body parts, age, types of detectors, the using contrast enhancement and working condition of the technologists, regular staffs or rotation-duty staffs, based on the K-DOS program distributed by FDA with the DLP value of diagnostic evaluation. The result shows that the effective radiation dose was 0.7mSv~41.7mSv for each region and male patients had more radiation exposure than females. And the amount of exposure was also affected by the types and the method of detectors. Furthermore, the regular staffs took the role of helping the patient to get reduced amount of radiation exposure than rotation duty-staffs. Computed tomography (CT) use has increased dramatically over the past several decades. In this reason, to support the patients and the workers' health in the field, the hospitals should apply specialized regular working radiation technologist system and manufacturing companies of those CTs should develop low medical radiation exposure devices.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.182-186
• /
• 2011

A poling method using multiple negative voltage was introduced to fabricate periodically poled lithium niobate (PPLN) devices with quasi-phase matching (QPM) period of $12.9\;{\mu}m$ by utilizing an real-time visualization system. We also performed variation of the electric field during the poling. Two different conventionally used poling method, negative and positive single pulses, were used and the poling quality compared through microscopic images and far-field diffraction pattern analysis. Etched images on the +z and -z surfaces of PPLN showed that negative multiple pulse poling presented the highest periodicity in domain structures among the three methods. Duty ratio and its standard deviation were measured by analyzing far-field diffraction patterns. The newly introduced method of negative multiple pulse poling had duty ratio of 0.42 which was close to the ideal value of 0.50 and standard deviation of 0.020 that was about 3 times smaller than that of the other conventional methods.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.