• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.243-249
• /
• 2013

폐기물 환경 시설에서 폐기물 운반 차량의 폐기물 매립장 내 이동 경로와 폐기물 투척 위치를 추적하여 기록함으로써 향 후 폐기물 매립지 재사용을 위한 이력관리를 효율적으로 진행할 수 있다. 이들 폐기물 매립 위치 정보들을 3D 로 매핑하고 위치를 추출하여 최종 매립위치와 매립물 기록을 추출하기 위한 새로운 연구 방법이 다양한 실험조건하에서 구현되었다. 본 연구에서는 쓰레기 매립장 내에서의 차량의 이동경로와 매립시점을 판단할 수 있는 방법을 제시한다. 현재의 영상과 배경영상의 차를 구하여 차량의 이동경로를 추적하고 이동경로의 형태로부터 정차 여부를 판단할 수 있으며, 정차시의 영상과 배출구의 개방영상과의 비교를 통해 폐기물의 매립시점을 검출할 수 있도록 한다. 감시 카메라의 설치정보를 이용하며 매립지 평면상의 좌표와 화면좌표를 변환할 수 있는 방법을 제시한다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.433-434
• /
• 2012

본 연구에서는 쓰레기 매립장 내에서의 차량의 이동경로와 매립시점을 판단할 수 있는 방법을 제시한다. 현재의 영상과 배경영상의 차를 구하여 차량의 이동경로를 추적하고 이동경로의 형태로부터 정차 여부를 판단할 수 있으며, 정차시의 영상과 배출구의 개방영상과의 비교를 통해 폐기물의 매립시점을 검출할 수 있도록 한다.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.155-161
• /
• 2006

This paper introduces a new type of mechanical tape feeder for chip mounter. The mechanical feeder is composed of a pneumatic linear actuator and a linear feeding module with the application of a cam-slider. As semiconductor chips are getting smaller, PCB assembly makers require the feeder to position the chip with high accuracy. The linear feeding system improves the positioning accuracy of the chip by getting rid of the index error, which brings into existence on the sprocket rotating feeder. It also can make greatly reduce the dumping rate. The dumping error is caused by the impact occurred as the pawl to interrupt ratchet wheel rotation. The paper discusses its mechanism and mechanical performance. The positioning accuracy and the dynamic characteristic were measured for long time operation and analyzed. As a result, the feeder showed very good performance. However, the feeding system was dynamically unstable due to the cover film eliminator that is required to be modified

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.212-221
• /
• 2007

This paper describes on the evaluation and management of work process in suction hopper dredger and grab bucket dredger as an application of a PC-based ECDIS system. The dynamic tracking of dredging bucket and the data logging of grab dredging information were performed by using the grab dredging vessel "Kunwoong G-18". The position and route tracking of the dredger moving toward the ocean dumping site of dredged material was performed by using the hopper dredging vessel "Samyang-7". The evaluation of wok process in the dredging field, for grab dredger, was continuously carried out on January to May, 2006, in Incheon Hang and for hopper dredger, on July to December, 2003, in Busan Hang, Korea. The dredging information, such as dredger's position, heading, dredging depth and route track which was individually time stamped during the dredging operation, was automatically processed in real-time on the ECDIS and displayed simultaneously on the S-57 ENC chart. From these results, we conclude that the ECDIS system can be applied as a tool in order to manage the work process during the dredging operation, and also in order to generate the factual record of the dredging activities that is sufficient for dredging inspector to accurately evaluate the contract performance even in the absence of a full-time onboard inspector.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.49-58
• /
• 2016

In modern society, designers started feeling moral and social responsibility in the aspect of environment as a position of suggesting something new. Rather than creating another waste to make something innovative, the concept of Upcycling which is about adding design or utilization to the existing recyclable materials to raise their value to products or art works has started settling down. Among them, there have been various researches on the use of offcut waste to be dumped. Such use of waste can be found in Jogakbo (patchwork), one of our traditional boudoir crafts. This could be connected to the concept of the modern Upcycling in the aspect of giving new values to the wasted pieces of fabric through needlework. Therefore, this study suggested Stitch work as new Upcycling furniture by seeking for the common connections between Upcycling and traditional Jogakbo, and then reinterpreting them in the same viewpoint. It was an opportunity not only to rediscover 'the esthetics of waste' by changing the awareness of 'behavior of dumping', but also to reinterpret or reconsider the tradition. Based on this, it is expected to continuously have new attempts to use offcut waste for eco-friendly design in the future, and also to have opportunities to seek for new directions of Upcycling to rediscover new values through the revaluation of valuelessness.

• 한국ITS학회 논문지
• /
• 제1권1호
• /
• pp.79-88
• /
• 2002

국가응급대응정보시스템(NERIS)개발의 일부인 수송안전정보부분은 최적수송경로제공시스템과 수송사고 조기경보시스템으로 구분된다. 본 연구는 조기경보시스템을 구축하기 위한 것으로 유해화학물질을 수송하는 차량에 대하여 수송시 차량의 위치 및 위험물의 상태를 실시간으로 모니터링 함으로써 수송시 발생할수 있는 유고에 따른 피해(화재, 폭발, 가스 유출 등)를 사전에 방지하거나 조기 감지하는 것을 목적으로 한다 이를 위해 조기경보시스템을 실시간 모니터링, 폭발 상황관리, 관련기관정보제공의 3가지 시나리오로 구분하고, 각각의 시나리오에 따른 기능적 요구사항과 아키텍쳐를 제시한다 총 3단계 연구중 1단계 결과로 실시간 유해물질 차량의 모니터링 시스템은 차량의 실시간 관리가 가능할 뿐 아니라 기타 특정 폐기물이나 건축 폐기물 등의 무단당치 및 폐기 등의 불법적인 행위에 대한 자동 단속 및 관리를 위한 지침으로 충분히 활용 가능할 것으로 판단되었다. 현재 시범 적용을 위해 위치검지 및 통신기술에 대한 비교 $\cdot$ 검토를 진행 중에 있으며, 향후 적절한 기술을 선정하여 1차적으로 수도권에 한하여 시범적용을 수행 할 예정이다.

• 수산해양기술연구
• /
• 제47권1호
• /
• pp.27-36
• /
• 2011

Squid by-product like viscera has just been recognized as one of the serious pollutants on the surrounding marine environment in Ulleung island of Korea. The effect as a marine pollutant, however, has not been examined and evaluated properly. It was carried out the comprehensive examination of the marine pollution by disposing squid by-products. The sediments and water qualities were investigated in several positions, including the dumping position around Ulleung island. It is also estimated a spreading of by-product in terms of estimating the sinking speed and evaluating the attracting characteristics as a feed. As a result, There were no significant pollutions of the sediment and water quality. The spreading of by-product by the local current was 2-2.5 times of the depth, and it will become longer in spring tide. It was confirmed that the squid by-product has attracting ability for local fish by acoustical survey. Furthermore, it can be useful for the local fish species as feeds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.10-15
• /
• 2007

For the introduction of the electricity of the special design and supervision system to Protect the faulty-workmanship of the electricity equipment and to reserve the electricity safety, last 1995 "Electricity Technology Management Act" were carried out enactment. March 2002, we introduced the pre-Qualification system that is selected the competent company about the electricity design and supervision service over so much capacity which is ordered by the Public institution such as the nation, local autonomous entity, government investment institute and so on. December 2005, the electricity equipment over so much capacity was taken the housing construction plan's approval by the housing act in case, the municipal or district governor with the authority to approve who selected the electricity supervision company according to the pre-Qualification system. Due to the introduction of the system, we could expect the rights and interests increase of the consumer by eradicating dumping of the close relationship between supervision company and the builder, reduction and concurrent position of the supervisor, according to confirm the quality of the electricity equipment and electricity safety. In spite of introducing of the system, the problems occured as reducing the electricity designer's task range compared with different field, modifing the supervisor's rank system rationally, because of researching about the electricity design and supervision technique lacks. Also, KEEA(Korea Electric Engineers Association) manage the caller of the electricity design and supervisor(company or people), but the problems occured as opening to the public about the curler management, introducing automatic bidding system and We need the solution plan about this. Consequently, we consider the present situation of the domestic and outside and problem about the electricity design and supervision system in this paper, try to present rational operation plan through this.

• 한국조경학회지
• /
• 제23권1호
• /
• pp.51-65
• /
• 1995

Conservation of the natural environiment In chosun-Dynasty, Korea, is analysed on the basis of the of official records of the king's offices(Chosun-wangjo-sillok). In the popular ideologies of the dynasty, Seongleehak(philosophy of humanity arid natural laws) and Pungsu (geomancy) , the naturnal enviroment is defined as an entity con-sisting of Cheon (heaven) , San(mnountains) , Su (water), Geumsu (animals)and Chomok (plants) .the notion of Tacksi-Tackmul(being careful to take natural resources at the right time) was one of the Cheonmyung (eavenly decrees) . It was believed that violation of this principle resulted in natural disasters. Sasan(four mountains surrounding Hansungbu-, the capital city, now Seoul) , were strictly preserved according to geomancy practices. In areas other than the capital city, Sanlimcheontack (mountains, forests, rivers and ponds) were con-served for sustained production of building materials especially pinetrees for ship building, foods, firewoods, horses, and orter useful natural resources. Various conservation policy insturuments were adopted. Prunning trees was permitted only in October. Capturing fishes was allowed only after the spawning period. Protection areas were designated in Sasan, Seongjoesiplee (surroundings of the capital city) , Geumsan(protected mountains), Kangmujang(hunting and army training grounds), Sijang(firewood areas), Mokmajang(horse ranches) and Neungyuk(royal tombs) . Activities prohibited for conservation purposes included cutting timbers, burning, building houses or tombs, dumping wastes, farming and breaking up fresh land, grazing, hunting and trespassing. Positive actions for conservation were rituals to Heaven ennoblement of natural elements such as mountians or rivers, planting trees, Boto (supplementing soil on low ridges) , Josan (mounding) and making ponds. Boto, Josan and making ponds were to make ideal terrains for geomancy. Many government bodies and civil servants were engaged in the conservation activities. For example, Sanjik(forest keeper) was a special position with responsibility for forest management.

• 한국수산과학회지
• /
• 제32권3호
• /
• pp.338-344
• /
• 1999

Floating debris was recorded from a training ship, $\sharp$1 Kwanaksan, of Pukyong National University with about 10 knots speed at July 15th and 20th of 1997. The sampled area is the middle of southern sea of Korea, divided into 44 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoam, plastics, floating metal and glass containers. All identified items within a 100 $\pm$ 2 m wide band were recorded but ignored if beyond this boundary. The results of distribution and transport of floating debris in the area are as follows: 1. The quantities of debris during the survey were distributed from $1.6\~369.7\;items/km^2$. The most obvious trend is the widespread distribution of all debris. The highest densities of all debris were discovered in the coastal waters of Namhae and Yokji island, and of about 50 km off from the southward of Yokji and about 74 km off from the eastward of Komun island. Especially many of small styrofoams within $\phi$20 cm were observed in these segments. 2. Styrofoams and plastics were composed of $83.5\%$ among all debris, next woods items, $9.8\%$. 3. The quantities, distribution shapes and composition of debris were varied as the observed duration and the natures of each items. 4. These phenomena are concluded that firstly they depend on the river discharges included debris due to precipitation falls, secondly inflow or dumping debris are drifting to the off-shore by Kuroshio currents present at their adjacent sea, But on the basis of the observed data it is difficult that source position, quantities and inflow items of debris are identified, and also the transport processes is pursue. further more surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the stationary area, finding of sources, removal method of debris and resistants of marine productivity.