• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.38-46
• /
• 2002

This paper evaluates crashworthiness of KHST carbodies under the SNCF accident scenario (collision against a movable rigid mass of 15 tons at 110 kph) and the scenario of train-to-train collision at 30 kph. The numerical results show that the final design of the KHST power-car doesn't have a good response on crashworthiness. So an improved design has been suggested for it. The improved design has shown good performances in the viewpoint of energy absorption and survival space at several numerical simulations, such as the accident collided against a deformable dump truck of 15 tons at 110 kph, the driver's dummy analysis, and the accident of train-to-train collision for the first three units at 30 kph.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.107-108
• /
• 2020

The severity of the global climate crisis is increasing due to greenhouse gases caused by human activities. As a result, countries and industries are making efforts to reduce carbon dioxide emissions, the biggest cause of global warming. Many studies have been conducted to predict carbon emissions in the construction sector to reduce this, but they have not actually produced a highly usable formula in the field. Therefore, the two variables 'Curve Fitting' were performed based on the data of excavators and trucks measured at the field. As a result, we have obtained a carbon dioxide emission prediction model for construction equipment, and we would like to use it to help establish an eco-friendly process plan.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.286-291
• /
• 2011

Onsite usage of construction equipment accounts for a 6.8% of air pollution in Korea. The high concentration of carbon dioxide in such emissions impact not only climate change, but also people's health. However, greenhouse gas emissions from onsite equipment usage have not yet been fully investigated. This study presents a comparative analysis on how much greenhouse gas is generated by various equipment types used in different construction activities. Two ongoing cases which involve a typical road construction project in Korea were selected for the comparison purpose. Greenhouse gas emissions from each onsite equipment usage of the different activities were estimated on the ground of design documents. The estimates were compared and analyzed to derive the main sources of greenhouse gas emissions. The result showed that earthwork constituted the largest part-more than 90%-among work types. Dump truck, bulldozer, and loader were major sources for such emissions. The study results are expected to be used as a basis for reduction of greenhouse gas emission from onsite equipment usage.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.67-74
• /
• 2019

본 논문에서는 노후된 중소규모 RC슬래브 교량에 대한 응답계수를 분석하였다. 이 응답계수는 진동수 기반 교량의 내하력 예측 모델에서 중요한 변수이며, 정적 및 동적 응답계수로 구성되어 있다. 정적 및 동적 응답계수는 교량의 현재와 이전(또는 설계) 상태의 진동수 변화와 충격 계수 변화에 따라 각각 결정된다. 여기서 충격계수 변화는 충격계수 응답스펙트럼에서 교량의 고유진동수에 따라 산출된다. 본 연구에서 고려한 총 4개의 대상교량은 지간길이가 12 m이고 시공 후 30년 이상 된 RC슬래브 노후 교량이다. 진동수 분석을 위해 덤프 트럭을 이용한 현장 동적 재하시험과 설계기반 FE모델을 이용한 고유치 해석을 통해 교량의 현재 및 설계 상태의 고유 진동수를 각각 도출하였다. 충격계수 응답스펙트럼 개발에 있어서 좀 더 현실적인 조건을 반영하기 위해 3축이동하중과 단순지지 및 양단고정 조건을 고려하였다. 분석 결과 응답계수는 0.21에서 0.91까지 광범위하게 분포하였고, 정적 응답계수가 총 응답계수 결과에 크게 기여한 반면 동적 응답계수는 결과에 작은 영향을 미쳤다. 1축 이동하중과 단순지지 조건에서의 응답계수와 비교해 보았을 때 최대 오차는 약 3%미만으로 매우 작게 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.781-786
• /
• 2009

The thesis shows that we gauged vibration of vehicular load regarding WPC girder bridge and researched into dynamic characteristics(natural frequency, vibration acceleration) of WPC girder bridge. By the basic of that, we researched on vibration serviceability by looking over and being compared to vibration criteria we had before. In the thesis, the gauged vibration made an analysis of vertical acceleration through FFT method and evaluated vibration serviceability about vibration sense the body feels by means of the standard of ISO assessment standard and Meister assessment standard by referring to analysis data. This research on bridge is WPC girder bridge of 90m span, width of 5.5m, and the experiment was gauged by a fluent which is right way and inverse way about dump truck of gross 270kN. Acceleration was located in the middle of 1st span, 2nd span, 3rd span. As a result of appraisal standard of Meister, the vibrations of the bridge have distributed between "Level C, Strongly Perceptible" and "Level B, Disturbing". Also the vibration can be attacked with unpleasant feeling. As a result of appraisal standard of ISO, from vibration influence didn't come to 60s, and reduced comfort boundary in part of most rigorous standard that such a case didn't happen.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1124-1131
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level (SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles (automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces (dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of all vehicle types, has il strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.421-427
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level(SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles(automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces(dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of au vehicle types, has a strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.331-337
• /
• 2010

The thesis shows that we gauged vibration of vehicular load regarding WPC girder bridge and researched into dynamic characteristics(natural frequency, vibration acceleration) of WPC girder bridge. By the basic of that, we researched on vibration serviceability by looking over and being compared to vibration criteria we had before. In the thesis, the gauged vibration made an analysis of vertical acceleration through FFT method and evaluated vibration serviceability about vibration sense the body feels by means of the standard of ISO assessment standard and Meister assessment standard by referring to analysis data. This research on bridge is WPC girder bridge of 90 m span, width of 5.5 m, and the experiment was gauged by a fluent which is right way and inverse way about dump truck of gross 270 kN. Acceleration was located in the middle of 1st span, 2nd span, 3rd span. As a result of appraisal standard of Meister, the vibrations of the bridge have distributed between "level C, strongly perceptible" and "level B, disturbing". Also the vibration can be attacked with unpleasant feeling. As a result of appraisal standard of ISO, from vibration influence didn't come to 60s, and reduced comfort boundary in part of most rigorous standard that such a case didn't happen.

• 대한토목학회논문집
• /
• 제28권1D호
• /
• pp.83-91
• /
• 2008

본 연구에서는 컴퓨터 시뮬레이션을 NATM공법 지하철 터널에 적용하여 적절한 장비조합과 작업 시간을 산출할 수 있는 모델을 구축하는 것을 목적으로 하며, 굴착하는 터널길이 즉, 증가되는 갱내 운반거리를 모델에 반영함으로써 현실에 가까운 모델을 구축하였다. 본 연구를 통해 구축된 모델은 지하철 터널공사의 제한 조건을 고려한 합리적인 의사결정도구로 사용하고자 하며, 터널공사 중 장비운용계획에 의한 작업 효율성에 가장 영향이 크다고 판단되는 버력처리 공정을 중심으로 시뮬레이션 기법 적용의 효과를 분석한다. 시뮬레이션 적용에 의한 효과 분석은 기존 관행에 의해 수립된 공사계획의 문제점을 알아보고, 굴착에 따른 갱내 운반거리와 투입되는 덤프트럭의 수의 변화를 통해 작업시간과 장비의 효율을 알아보았다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.107-115
• /
• 2017

PURPOSES : The piezoelectric energy road analysis technology using a three-dimensional finite element method was developed to investigate pavement behaviors when piezoelectric energy harvesters and a new polyurethane surface layer were installed in field conditions. The main purpose of this study is to predict the long-term performance of the piezoelectric energy road through the proposed analytical steps. METHODS : To predict the stresses and strains of the piezoelectric energy road, the developed energy harvesters were embedded into the polyurethane surface layer (50 mm from the top surface). The typical type of triaxial dump truck loading was applied to the top of each energy harvester. In this paper, a general purpose finite element analysis program called ABAQUS was used and it was assumed that a harvester is installed in the cross section of a typical asphalt pavement structure. RESULTS : The maximum tensile stress of the polyurethane surface layer in the initial fatigue model occurred up to 0.035 MPa in the transverse direction when the truck tire load was loaded on the top of each harvester. The maximum tensile stresses were 0.025 MPa in the intermediate fatigue model and 0.013 MPa in the final fatigue model, which were 72% and 37% lower than that of the initial stage model, respectively. CONCLUSIONS : The main critical damage locations can be estimated between the base layer and the surface layer. If the crack propagates, bottom-up cracking from the base layer is the main cracking pattern where the tensile stress is higher than in other locations. It is also considered that the possibility of cracking in the top-down direction at the edge of energy harvester is more likely to occur because the material strength of the energy harvester is much higher and plays a role in the supporting points. In terms of long-term performance, all tensile stresses in the energy harvester and polyurethane layer are less than 1% of the maximum tensile strength and the possibility of fatigue damage was very low. Since the harvester is embedded in the surface layer of the polyurethane, which has higher tensile strength and toughness, it can assure a good, long-term performance.