• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.55-61
• /
• 1989

The main contribution this research is the development of methodology which is capable of solving problems associated with the capacity expansion and operating schedule of energy industries. The principal concern of such industries is the proper allocation of primary energy which are required for the production of sufficient supply of electricity and petroleum products for the Korea`s energy needs. Nonlinear programming models are developed for power generation expansion planning and for the oil refinery industry. In order to deal with uncertainties about future demands for final energy, chance-constrained programming is used to formulate appropriate constraints. The methodology of the model can be used to evaluate Korean energy and expansion planning in the energy industry, especially the electric power generation industry and the refinery industry.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.108-112
• /
• 2000

The electric charge generated by flowing insulation liquid can create hazardous spark in transfer line and receiving tank etc. These electrification has generally been measured by current measurement with a ammeter connected to the receiving tank. This paper reports on the experimental result obtained by this method. As a experimental results: The injected charge value for unit volume increased in the following condition, the edge of the needle electrode was sharp, the number of needle electrode was fewer, the edge of the needle electrode was located close to the inside wall. When the charge density in the charge reducer is constant, electrode current and electrode potential by the charge injection from outside increase with increasing of oil velocity and streaming current. The electrode potential in charge reducer is made maximum value at edge point of reducer inside and minimum value at center line of charge reducer.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.309-314
• /
• 2000

Rubber is used as a primary suspension component in a vehicle or a mechanical structure. The aim of this study is to establish a procedure for measuring the material properties of rubber and to analyze the differences of material properties of virgin rubber and heat aged rubber. The effect of mechanical conditioning was shown and included in the procedures of tensile. compression. simple shear. and pure shear tests. In addition. using engine oil was recommended for compression test in order not to have barrelling. Moreover, based on the material properties of vil·gin rubber and heat aged rubber. equations of C10 and IRHD were proposed as a function of heat aging temperature and time.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.237-240
• /
• 1999

This study showed that the optimized cleaning process using non-aqueous cleaning solvents is adaptable in the industrial field for existing 1.1.1-TCE cleaning solvents which is an ozone depleting sustance. Alternative cleaning solvent system substituted for existing cleaning solvent against non-aqueous pollutants(cutting & flux oil), was evaluated for the cleaning efficiency using gravimetric analysis method and surface change of sample by Image analyzer. The results showed that alternative solvents and process had excellent cleaning efficiency.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.2
• /
• pp.101-115
• /
• 1986

This study was designed to establish Korean food culture by analizing 17 sets of Jinyounuigue(진연의궤) Jinchanuigue(진찬의궤), and Jinjarkuigue(진작의궤) which were the records of royal party procedures in Yi dynasty. Side dishes were classified into 20 groups in this study ; Tang (場) 19, Jungol (전골) 3, J'im 18, Jun (전) 20, Jock 14, Pyunuk (片肉) 14, Cho 12, Hyae 17, Po 8, Chae 3, Bung 1, Nanri 1, Sooran 1, Sookran 1, Jaban 1, Kimchi 2, etc. all of 140 different kinds of side dishes. There was no tendency in omission or addition of food materials. Food materials were beef, pork, lamb, chicken, duck, peasant meat, dock's egg, fish, shellfishes, mollusca, curstacea, seaweeds, vegetables, fruits, beancurds, muk (a starch jelly), d'ock, muchrooms, etc. Seasonings were soysauce, pepper, sesame oil, ginger, green-onion, garlic, bean paste, ginger powder, red pepper powder, red pepper paste, salts, vinegar, honey, sesame power, etc.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1799-1802
• /
• 2008

More than 7 million people use the Seoul metropolitan subway network daily. This number tends to increase due to the increase of oil price. Indoor air quality of electrical multiple unit (EMU) is strongly affected by outdoor air quality, however, indoor thermal comfort is subjected to heating, ventilating, and air conditioning (HVAC) system of EMU. In general, air temperature, humidity, air velocity, surface temperature, and illumination are key parameters affecting thermal comfort of passenger. It is known that the well-designed HVAC system should improve the thermal comfort of passengers and should increase the energy efficiency of HVAC system also. In this study, we analyzed the thermal comfort of advanced EMU developed by Korea Railroad Research Institute by using the computational fluid dynamics (CFD) in order to find the optimum HVAC system which can improve thermal comfort of passengers with a minimal energy use.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.122-128
• /
• 2021

Machining operations require removal of chips to keep the coolant clean and fresh throughout the operation time. In this study, microchip removal equipment was developed using AutoCAD and CATIA programs for 3D modeling and 2D draft. In addition, the flow analysis and electromagnetic field analysis of the equipment were performed using the COMSOL Multiphysics program. The flow design of the coolant oil tank was realized on the basis of fluid analysis results. Further, on the basis of magnetic density analysis, a conveyer was designed for effectively removing metal microchips in the tank by using arrays of neodymium permanent magnets.

• Clean Technology
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2009

Catalytic hydrodechlorination of PCBs (polychlorinated biphenyls) included in the transformer oil was carried out to detoxify PCBs and to recycle the treated oil. Catalysts such as 0.98 wt% Pt and 0.79 wt% Pd on ${\gamma}$-alumina (${\gamma}-Al_2O_3$) support, 12.8 wt% Ni on ${\gamma}-Al_2O_3$, and 57.6 wt% Ni on silica-alumina ($SiO_2-Al_2O_3$) support were used for the catalytic hydrodechlorination. Various supercritical fluids such as carbon dioxide, propane and isobutane were used as reaction media. The effects of reaction temperature, reaction time, catalysts, and supercritical fluids on the catalytic hydrodechlorination were examined in detail. The detoxification degree increased in the order of Ni > Pd > Pt. This is possibly due to higher metal loading and larger metal size of the Ni catalyst. Below $175^{\circ}C,\;scCO_2$ was found as the most effective reaction media for the catalytic hydrodechlorination of PCBs included in the transformer oil.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2009

Objectives : The aim of the present study is to evaluate the effects Rehmannia glutinosa, Radix puerariae, Semen coicis, Fructus hordei, Cortex acanthopanacis, Fructus chaenomelis, or Radix glycyrrhizae extracton 3T3-L1 preadipocytes differentiation. Methods : We adopted Oil Red O staining methods to observe the formed lipid droplets. And the amount of lipids in adipocytes was measured using absorptiometric analysis. Results : The extracts of Rehmannia glutinosa, Radix puerariae, Semen coicis, Fructus hordei, Cortex acanthopanacis, Fructus chaenomelis, or Radix glycyrrhizae stimulated the preadipocytes differentiation and lipid droplet formation. And the complex extract of the traditional herbal medicines stimulated there actions more than single extracts. Conclusions : The extract of Rehmannia glutinosa, Radix puerariae, Semen coicis, Fructus hordei, Cortex acanthopanacis, Fructus chaenomelis, or Radix glycyrrhizae has stimulatory effects. on adipogenesis. Moreover, the complex extract of the traditional herbal medicines has more effect than single extracts.

• The Korean Journal of Petroleum Geology
• /
• v.13 no.1
• /
• pp.17-23
• /
• 2007

Gravity characteristics are investigated in the vicinity of the DASAN scientific station, located at the Svalbard Archipelago, the Arctic using ArcGP data. Boundary effects of free-air gravity anomalies, which appeared generally at the continental margin, are erased after Bouguer correction was applied. Complete Bouguer anomalies produced after terrain correction by GrOPO30 show that gravity anomalies increase from continent to marine. This phenomena seem to be related to the rise of Moho discontinuity. The cut-off frequency of 0.16 was decided after power spectrum analysis and the gravity anomalies were divided into two parts. Residual anomalies in high frequency part show that characteristics of high values along the faults and of low values related to thick sediments in the continent. Characteristic is low values from basement subsidence of continental slope or thick sediments in the marine. The undulation of Moho discontinuity from 3-D inversion modeling show typical characteristics of continental margin that become higher from Svalbard archipelago to Knipovich ridge bordering Eurasian plate.