Browse > Article
http://dx.doi.org/10.14775/ksmpe.2021.20.03.122

Development of Microchip Removal Equipment Using Neodymium Permanent Magnets  

Choi, Sung-Yun (Department of Advanced Engineering, Graduate School, Kyungnam Univ.)
Wang, Jun-hyeong (Korea Electrotechnology Research Institute(KERI) Manufacturing Innovation Simulation Center)
Wang, Duck Hyun (School of Mechanical Engineering, Kyungnam Univ.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.20, no.3, 2021 , pp. 122-128 More about this Journal
Abstract
Machining operations require removal of chips to keep the coolant clean and fresh throughout the operation time. In this study, microchip removal equipment was developed using AutoCAD and CATIA programs for 3D modeling and 2D draft. In addition, the flow analysis and electromagnetic field analysis of the equipment were performed using the COMSOL Multiphysics program. The flow design of the coolant oil tank was realized on the basis of fluid analysis results. Further, on the basis of magnetic density analysis, a conveyer was designed for effectively removing metal microchips in the tank by using arrays of neodymium permanent magnets.
Keywords
Micro Chip; Permanent Magnet; agnetic Flux Density; Flow Analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kim, J. S., Lee, D. S., Wang, D. H., "Development of Coolant/Waste-oil Separating and Cooling System with Chip Treatment", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16 No. 3, pp. 16-23, 2017.
2 Choi, S. Y., Kwon, D. G., "A Study of the Effectives for Surface Roughness by Cutting Angle and Cutting Fluid", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17 No. 1, pp. 57-62, 2018.   DOI
3 Sin, C. H., Jang J. G., "Effect of chemical treatment and variations of the physical properties of waste water-soluble cutting oil", Journal of Environmental Science International, Vol. 13, No. 4, pp. 403-412, 2004.   DOI
4 Lee, H. C., Kim, G. D., "A Study on the Discrimination of the Overhead Stirrer Impeller using the Dimensions of Permanent Magnets", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18 No. 2, pp. 52-57, 2019.   DOI
5 Lee, I. S., Kim, H. J., Kim, D. H., Kim, N. K., "A Study on Simulation of Chip Recycling System for the Management of Cutting Chip in 5-Axis FMS Line", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12 No. 6, pp. 175-181, 2013.   DOI