• 제목/요약/키워드: dual-type structure

검색결과 173건 처리시간 0.029초

하프 브릿지 듀얼 컨버터를 위한 새로운 능동형 무손실 스너버 (A New Active Lossless Snubber for Half-Bridge Dual Converter)

  • 한상규;윤현기;문건우;윤명중;김윤호
    • 전력전자학회논문지
    • /
    • 제7권5호
    • /
    • pp.419-426
    • /
    • 2002
  • 전류원 하프브릿지 듀얼 컨버터(이하 '듀얼 컨버터')를 위한 새로운 능동형 무손실 스너버가 제안된다. 제안된 능동형 무손실 스너버는 주 스위치의 턴 오프 시 변압기 누설 인덕터로 인해 발생되는 스위치 양단 전압 서지를 흡수해줄 뿐만 아니라 주 스위치 및 부가된 보조스위치의 턴 온 시 영전압 스위칭까지 보장해 주기 때문에 스위칭손실을 거의 무시할 수 있으며, 고 효율 및 고속 스위칭에 매우 유리한 장점을 가져 높은 전력밀도를 가진 고성능승압형 컨버터의 구현을 가능하게 한다. 또한 영전압 스위칭을 위해 별도의 인덕터 없이 변압기의 누설 인덕터만으로 그 구현이 가능하며 보조 스위치의 구동신호가 주 스위치와 교대로(complementary) 온 오프 되므로 별도의 PWM IC가 필요 없는 간단한 구조를 가지며, 제작 시 단가 절감 효과를 얻을 수 있다. 본 논문에서는 기존에 제안된 바 있는 듀얼 컨버터에 제안된 능동형 무손실 스너버를 적용하여 그 동작 원리, 영전압스위칭 조건, 그리고 설계방법 등에 대해 살펴보고 최종적으로 제시된 이론적인 분석결과 및 동작의 유효성 검증을 위해 24V/DC 입력에 200V/DC 출력을 갖는 200W급 축소모델을 제작하여 100kHz로 구동한 실험 결과를 제시한다.

방독면 안경 개발 (Development of Gas-mask Spectacles)

  • 이정영;박정식;장우영
    • 한국안광학회지
    • /
    • 제13권4호
    • /
    • pp.9-12
    • /
    • 2008
  • 목적: 현재의 방독면은 안경을 착용하는 사람들에게는 매우 불편한 구조로 되어 있다. 이를 개선하여 군인이나 소방관들이 자신을 보호하고 인명을 구조하는데 도움이 되도록 하였다. 방법: 외면렌즈와 내면의 시력보정용 렌즈의 2중 구조로 되어 있는 것을 아크릴 프레임을 방독면에 부착하는 단일 구조로 변경하고 실리콘 차단제를 이용하여 렌즈와 프레임 사이를 밀폐하여 가스의 유입을 방지하게 하였다. 렌즈에서 발생하게 되는 비점수차제거와 정간거리 유지를 위해 S자형의 프레임으로 개발하였다. 결과: 완전한 시력교정과 가스차단이 가능하고 일반 안경처럼 안경렌즈를 교환하여 사용할 수 있게 되었으며 시선과 렌즈면의 경사로 발생하던 비점수차 0.53D~1.78D, 짧은 정간거리로 발생하던 0.07D~0.66D의 과교정, 전경각 미설정으로 발생하던 0.1D~0.3D의 비점수차를 제거할 수 있게 되었다. 결론: 방독면을 쓴 상태에서도 밝은 시야의 확보가 가능하여 전투력 향상과 인명구조 활동 등에서 큰 도움이 될 수 있을 것으로 예상된다.

  • PDF

석탑 탑구(塔區)의 역할 및 변천에 관한 연구 (A Study on the Role and Transition of the Tapgu in Stone Pagoda)

  • 정해두;장석하
    • 건축역사연구
    • /
    • 제19권1호
    • /
    • pp.91-104
    • /
    • 2010
  • Korea's stone buildings are varied in their types such as stone pagodas, stone lanterns, stone bridges, stoneworks, etc. These account for more than 30% over the entire cultural properties, but research achievements are lacking compared to wooden buildings. Accordingly, this study aims to identify the shape, role and transition of Tapgu, which had been used to set up boundary at a stone pagoda, one of the stone buildings. The 20th stone pagodas, which have relative accuracy in its forming year, have been studied around national treasure or treasure between 7th century and 9th century. There are a lot of different opinions about the role and meaning of Tapgu, and at this writer's option, Tapgu is defined as follows: First, each structure plays a different role. A structure to pass the load in the upper part to the ground can be seen as a stair or a pedestal, but a structure to form double foundations can be considered as Tapgu. Second, Tapgu can be used to divide areas with stones or stepping stones. As a result, the shape, role and transition of Tapgu is as follows: Firstly, when it comes to its shape, Tapgu includes flagstone type, belt type, double foundation type, compound type. Flagstone type had been used to set up boundary at stone pagodas by using foundation stone, belt type by keeping apart from stone pagodas, and double foundation stone by installing dual foundation stones. Secondly, Tapgu is considered to set up boundary in the case of flagstone and plate stone, and acts like a structure which can prevent surrounding area of stone pagoda from coming up while being stuck around stone pagodas. Belt type was installed only for the purpose of forming boundary. At the bottom, double foundation stone had been used to pass the load in the upper part to the ground in the same way as the foundation stone in the upper part, and the boundaries were set varying the size. Thirdly, when it comes to the transition of Tapgu, flagstone type of boundary stone had been installed in the 7th century, and belt type of boundary stone had been mainly installed in the 8th century. And double foundation stone had been installed in the 9th century. Comprehensively, flagstone type and belt type had been made around the 7th and 8th century when Tapgu was regarded important and stone pagoda started to be built. At the turn to the 9th century, the role of Tapgu had been increasingly losing in the construction of stone pagoda, and foundation stone started to appear.

종축 자속형 영구자석 동기 발전기의 전자기적 구조 변경에 따른 출력특성 비교 (The Comparison of Output Characteristic by the Electro-magnetic Structure Modification of the Axial Flux Type Permanent Magnet Synchronous Generator)

  • 정태욱;배병덕;김회천
    • 조명전기설비학회논문지
    • /
    • 제25권6호
    • /
    • pp.42-48
    • /
    • 2011
  • Generally, the structure without the stator core Axial Field Permanent Magnet (AFPM) generator was simple and there was nearly no cogging toque. And because it had the wide driving rate area, it had been being mainly used in the small wind power generation system. However, AFPM generator with non-slotted stator can't generate high voltage at low wind speed due to long air-gap. It is the reason of output efficiency drop. Therefore, in this paper, the AFPM synchronous generator with internal rotor and dual slotted stators for the small wind turbine is studied, and deal with a cogging torque minimization through the determination of optimum pole-arc ratio.

700 MHz 대역 LTE용 광대역 PIFA 설계 (A Design of Wide-Band PIFA for 700 MHz LTE Band)

  • 박찬진;민경식;김정원;안성용
    • 한국전자파학회논문지
    • /
    • 제23권3호
    • /
    • pp.328-334
    • /
    • 2012
  • 본 논문은 휴대폰용 700 MHz 대역 LTE용 안테나의 광대역 설계 기법을 제안한 것이다. 제안한 안테나는 역 F(Planar Inverted - F) 구조를 기본으로 설계되었다. 광대역을 실현하기 위해 전기적 길이를 제어하는 방법으로 라운드 구조와 이중 공진 특성을 얻을 수 있는 지선 소자가 설계에 도입되었다. 그 결과, 복소비 유전율이 4.4인 FR-4 기판에서 $30{\times}34mm$의 협소한 공간임에도 불구하고, 약 95 MHz의 대역폭을 실현했다. 측정된 반사손실, 대역폭과 이득 방사 패턴은 계산 값과 잘 일치하였다.

PCB TYPE 안테나의 초광대역 설계 및 구현 (Design and Implementation of Wide Band of PCB Type Antenna)

  • 서정훈;정대현;김병국;정한영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.151-154
    • /
    • 2004
  • In this paper. we present the 2.4 GHz and 5 GHz dual band antenna for a multiple PCB (Printed Circuit Board) antenna. Using antenna has a monopole structure with lines on FR-4(${\varepsilon}_r\;{\approx}\;4.6$) PCB. The obtained antenna can perform in 2.4 GHz and 5 GHz bands and be adopted for other wireless applications.

  • PDF

능동 및 수동 특성을 고려한 전자석 구동형 능동 엔진 마운트의 최적화 (Optimal Design of Electromagnetic Type Active Control Engine Mount in Consideration of Actuator Efficiency)

  • 이보하;이종원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.1112-1118
    • /
    • 2007
  • This paper investigates the performance of an electromagnetic type active control engine mount (ACM) recently developed in the laboratory. The ACM employs the basic structure of the conventional hydraulic engine mount of which upper chamber is connected to a dual magnet electromagnetic actuator. The actuator, that essentially replaces the existing decoupler of the conventional passive hydraulic engine mount, actively controls the upper chamber pressure. Using the linearized ACM model incorporated with the actuator dynamics, we suggest an optimal design of ACM, maximizing the actuator efficiency as well as the vibration isolation efficiency.

  • PDF

Resilient structures in the seismic retrofitting of RC frames: A case study

  • Pallares, Francisco J.;Dominguez, David;Pallares, Luis
    • Structural Engineering and Mechanics
    • /
    • 제76권1호
    • /
    • pp.57-65
    • /
    • 2020
  • It is very important to allocate valuable resources efficiently when reconstructing buildings after earthquake damage. This paper proposes the use of a simple seismic retrofitting system to make buildings more resilient than the stiffer systems such as the shear walls implemented in Chile after the earthquake in 2010. The proposal is based on the use of steel chevron-type braces in RC buildings as a dual system to improve the seismic performance of multistory buildings. A case study was carried out to compare the proposal with the shear wall solution for the typical seismic Chilean RC building from the structural and economic perspectives. The results show that it is more resilient than other stiffer seismic solutions, such as shear walls, reduces the demand, minimizes seismic damage, gives reliable earthquake protection and facilitates future upgrades and repairs while achieving the level of immediate occupancy without the costs of the shear walls system.

이중 계층 패렐랙스 배리어 기반의 무안경식 3D 디스플레이 (Autostereoscopic Display based on Dual Layer Parallax Barrier)

  • 이현;이응돈;엄기문;정원식;이성중
    • 대한전자공학회논문지SP
    • /
    • 제48권6호
    • /
    • pp.68-76
    • /
    • 2011
  • 본 논문에서는 기존 무안경식 3D 디스플레이의 제한된 시야각으로 인한 3D 시청에서의 불편함을 해소하기 위해 새로운 패렐랙스 배리어 방식을 제안한다. 제안된 방식은 기존 패렐랙스 배리어의 TN-LCD 구조에서 LC를 공유하는 이중 계층의 ITO 쌍을 추가하였으며, 시선 추적 장치에 의해 시청자의 위치를 감지하여 자동으로 3D 시야각을 시청자의 위치에 맞도록 변화 시킬 수 있는 이중 계층의 패렐랙스 구조를 갖는다. 제안한 이중 계층 패렐랙스 배리어 방식을 시제품으로 구현하고 실험한 결과, 제안한 방식의 유효성을 확인할 수 있었다.

큰 외경을 갖는 튜브집합체의 삽입형 지지체 설계 (Design of Insert type supports for a tube bundle of a large diameter)

  • 김재용;김형규;윤경호;이영호;이강희
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1373-1376
    • /
    • 2008
  • A supporting structure for a long tube bundle of a large diameter is considered in this paper. The primary purpose of the present study is to develop a spacer grid structure for a so-called "dual cooled nuclear fuel", which has been being studied for a nuclear power uprate. The outer diameter of the fuel rod increases considerably from the conventional one. So a completely new shape of the supporting structure (spacer grid) needs to be developed. One of the challenges is to insert a supporting tube into the cross points of the grid straps. To meet a supporting performance, the load vs. displacement characteristics should be obtained. So the present study focuses on the finite element analysis technology to evaluate the characteristics through a parametric study. As a result, major influencing parameters are investigated for an optimized spacer grid design.

  • PDF