• 로봇학회논문지
• /
• 제15권3호
• /
• pp.293-300
• /
• 2020

The purpose of our sensor system is to transparentize the large hydraulic manipulators of a six-ton dual arm excavator from the operator camera view. Almost 40% of the camera view is blocked by the manipulators. In other words, the operator loses 40% of visual information which might be useful for many manipulator control scenarios such as clearing debris on a disaster site. The proposed method is based on a 3D reconstruction technology. By overlaying the camera image from front top of the cabin with the point cloud data from RGB-D (red, green, blue and depth) cameras placed at the outer side of each manipulator, the manipulator-free camera image can be obtained. Two additional algorithms are proposed to further enhance the productivity of dual arm excavators. First, a color correction algorithm is proposed to cope with the different color distribution of the RGB and RGB-D sensors used on the system. Also, the edge overlay algorithm is proposed. Although the manipulators often limit the operator's view, the visual feedback of the manipulator's configurations or states may be useful to the operator. Thus, the overlay algorithm is proposed to show the edge of the manipulators on the camera image. The experimental results show that the proposed transparentization algorithm helps the operator get information about the environment and objects around the excavator.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.105-114
• /
• 2003

In this study, a dicing machine with vision system was built and an algorithm for automatic alignment was developed for dual camera system. The system had a macro and a micro inspection tool. The algorithm was formulated from geometric relations. When a wafer was put on the cutting stage within certain range, it was inspected by vision system and compared with a standard pattern. The difference between the patterns was analyzed and evaluated. Then, the stage was moved by x, y, $\theta$ axes to compensate these differences. The amount of compensation was calculated from the result of the vision inspection through the automatic alignment algorithm. The stage was moved to the compensated position and was inspected by vision for checking its result again. Accuracy and validity of the algorithm was discussed from these data.

• 핵의학기술
• /
• 제13권1호
• /
• pp.57-62
• /
• 2009

목적 : 기존의 fan-beam을 이용한 triple detector system에서 parallel collimator를 이용한 dual detector system으로 변화에 있어 acquisition과 processing 부분에서 발생할 수 있는 여러 가지의 변수를 phantom과 volunteer test를 통하여 실험해 보았다. 1 day protocol brain spect를 위하여 parallel collimator에서만 적용되는 OSEM2D와 OSEM3D의 비교 분석을 중점으로 하였고, 모든 연구는 동등한 검사시간으로 fan-beam을 사용하였던 Triple gamma camera보다 parallel을 사용한 dual camera에서 보다 우수한 영상을 구현하고자 하는 목표를 지향하였다. 실험재료 및 방법 : Normal time scan과 short time scan을 실시하였고, collimator 변화에 따른 영상의 변화도 알아보았다. Jaczack performance phantom과 Body IEC phantom을 이용하여 SNR과 contrast를 평가해보았고 Hoffman 3D phantom의 실험을 거쳐 volunteer test를 실시하였다. 결과 : Normal time과 short time의 비교에서는 FLASH3D를 제외한 OSEM2D와 FBP는 분석방법으로 부적합하였다. LEAP는 resolution과 sharpness 등 전체적인 영상의 질이 기존의 fan-beam을 이용한 영상과 유사하였고, LEUHR은 감도의 저하로 1 day protocol을 적용하기 위한 scan time에는 부적합하였다. 재구성법의 비교에서는 Flash-3D를 이용한 결과들이 기존의 FBP와 OSEM-2D보다 월등히 정확함을 정성적으로 확인하였다. 결론 : OSEM3D 재구성법으로 Dual detector system에서의 1 day protocol brain SPECT 시 Fan-beam보다 sensitivity가 떨어지는 parallel collimator의 단점을 보완하면서 영상의 질 또한 de-noising과 scatter correction, resolution recovery 등의 효과를 얻을 수 있으므로 1 day protocol brain SPECT의 검사의 적용에 유용할 것으로 사료된다. 그러나 이러한 half-time method라 제공되는 다양한 프로그램의 임상적용에 대한 광범 위한 연구가 현실적으로 필요하며 향후 계속적인 연구가 기대되는 바이다.

• 한국멀티미디어학회논문지
• /
• 제16권11호
• /
• pp.1272-1280
• /
• 2013

본 논문에서는 실시간으로 위험한 소리를 인식하고 그 방향을 파악하여 이를 통해 PTZ Camera가 위험한 소리 방향으로 회전하여 해당 지역 영상을 획득하여 전송할 수 있도록 지원하는 소리 감시 시스템을 제안한다. 제안 소리 감시 시스템은 적응 혼합 가우시안 모델(AGMM)을 사용하여 일상적인 배경 소리와는 비정상적인 소리를 전경 소리로 검출하고, AGMM 모델로 미리 학습된 전경 소리들 중의 하나로 분류한다. 분류된 소리가 위험한 소리에 속하는 경우, Dual delay-line 방법에 기반을 둔 음원 방향 추정 기법을 사용하여 그 방향을 파악한다. 최종적으로 방향 정보를 사용하여 PTZ 카메라를 조절하여 그 방향 지역의 해당 영상을 획득하고 전송될 수 있도록 지원한다. 제안하는 소리 감시 시스템은 전경 위험 소리들을 안정적으로 검출하고, 79%의 정확도로 위험소리들을 분류하고, 작은 오차범위 이내 음원 방향 추정 성능을 나타냄을 실험결과를 통해 확인하였다.

• 로봇학회논문지
• /
• 제9권3호
• /
• pp.140-146
• /
• 2014

This paper introduces a dual-arm robot painter system which is capable of sketching a camera-captured image with short line segments. To express various curved edges in the image by combining line segments, we first apply edge detection algorithm to the entire image, split the edged image into small boxed pieces, and then apply Hough Transformation to each piece so that the edges inside the piece can be approximated with short line segments. To draw the picture within a reasonable time, we designed a simple dual-arm robot system and controlled both arms concurrently according to linear interpolation algorithm. From the experiments, we could verify that simple linear motions can describe various images effectively with a unique brush style.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.63-69
• /
• 2012

This paper presents a method to derive the theoretical requirements for the development of a 400 mm optical window that transmits dual-band wavelengths and had a stable structure. We also present design and fabrication results. Among the required specifications, the surface figure error was defined by the transmitted wavefront deformation (TWD), ${\lambda}$/15 rms at 632.8 nm. This value was derived by estimating the predicted performances with respect to five independent items that could cause system performance degradation and then calculating the required wavefront error (WFE) to satisfy the performance goals. We measured the image resolution at each performance level to trace and verify the requirements. The article also describes a design optimization process that could minimize the weight and volume of the optical window attached to the payload securing the FOV of the camera. In addition, we accurately measured the deformation that occurred in the series of fabrication steps including processing, coating, assembly, bonding and bolting, and investigated the effects by comparing them to the results of a simulation performed in advance to derive the predicted performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3721-3737
• /
• 2015

3D reconstruction based on binocular data is significant to machine vision. In our method, we propose a new and high efficiency 3D reconstruction approach by using a consumer camera aiming to: 1) address the configuration problem of dual camera in the binocular reconstruction system; 2) address stereo matching can hardly be done well problem in both time computing and precision. The kernel feature is firstly proposed in calibration stage to rectify the epipolar. Then, we segment the objects in the camera into background and foreground, for which system obtains the disparity by different method: local window matching and kernel feature-based matching. Extensive experiments demonstrate our proposed algorithm represents accurate 3D model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2002

Nowadays, the improvement and development of Multi-media, information and communication technology are rapidly processed. And many products, for example, digital camera, digital camcorder, and PDA, are used for them. They need large data storage capacity and small size, light storage system. Due to that, many studies and researches in data storage system have been carried out. Especially, micro drive system was presented by IBM.(1) However, its system is expensive and uneasy to be portable. In ODD technologies, 1 inch drive system is not yet or in processing status.(2) If to be possible and to be come up, it is cheap than HDD system and easy to transfer information. In this paper, a miniaturized actuator(about linch) is designed and tested for ODD system. Specially, it is adapted for NFR(Near-field Recoding) system using SIL(Solid Immersion Lens). It is the dual-servo actuator which consists of a coarse actuator and fine actuator. Its actuating force generation method is VCM(Voice Ceil Motor). The fine actuator has 4-wire suspensions and bobbin wrapped by coil and includes focusing motion as well as tracking motion. The coarse actuator has an actuating coil and V-grooved guide mechanism. Also, the characteristics of the designed actuator is estimated by sine-swept mode and LDV(Laser Doppler Vibro-meter).

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.203-206
• /
• 2007

The Space-borne electro-optical camera system has panchromatic redundant image channel as well as primary channel in order to increase reliability of satellite system. In most case redundant channel never been used during the whole mission period. Staggered array configuration using redundant image channel and new operation mode proposed which operates primary and redundant channel simultaneously. Without new hardware design, fast electronics and system complexity, we can get 1.414 times more fine GSD image of original system or we can get 1.414 times more SNR or High dynamic range imaging mode. In this paper we deal with several image quality improvement methods using dual panchromatic channel.

• Journal of Radiation Protection and Research
• /
• 제37권1호
• /
• pp.16-24
• /
• 2012

본 연구에서는 이중 모드 컴프턴 카메라의 측면 흡수부 개발을 위해 CsI(Tl) 섬광체에 실리콘 광다이오드를 결합한 섬광 검출기를 제작하였고, 이를 위한 신호처리회로를 설계 및 제작하였다. 개발된 신호처리회로는 에너지를 결정하는 파트와 타이밍을 결정하는 파트로 구성되어 있으며, 트리거 신호를 발생시키기 위해 상승 에지 선별기 및 TTL-to-NIM 로직 변환기를 포함하도록 개발하였다. 검출기와 초단의 신호처리회로(front-end electronics, FEE)는 AC 커플링 구조로 구성하였다. FEE의 잡음 특성은 전체 시스템의 성능에 크게 기여하므로 설계 시 고려해야 할 몇 가지 조건들에 대해 논의하였다. 이후 제작된 감마선 검출 시스템의 에너지 분해능 및 시간 분해능을 결정하였다. 평가된 에너지 분해능은 662 keV 피크와 511 keV 피크에 대해서 각각 12.0% 및 15.6% FWHM이었다. 시간 분해능은 59.0 ns로 평가되었다. 본 연구를 통해 제작된 섬광 검출기 및 신호처리회로의 성능이 기대에 다소 미치지 못하므로 결론에서는 성능 향상을 위한 추가 연구 방향에 대해 논의하였다.