• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.271-278
• /
• 2006

This paper scrutinized the damping effects of installing the prototype PSSs by a transient analysis for eight buses of faults in the South Korean power system. The PSSs used have the co-PSS blocks for IEEEST model with a single input and the co+power PSS blocks for PSS2A model with dual inputs. The simulation tool was a TSAT(Transient Security Assessment Tool) developed by Powertech Labs Inc. The voltages of the transmission line for simulations were 765kV and 345kV, and the faults for eight cases were sequenced by considering the open state and the close state of the lines. In the simulations, the three-phase line to ground (L-G) fault generated different points for each region. The simulations were compared to the cases of no PSS, partial IEEEST and PSS2A, absolute IEEEST, and absolute PSS2A to show that the power system oscillation can be effectively damped by PSS modules. Simulations were conducted to confirm the effectiveness for the KEPCO (Korea Electric Power Corporation) power system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2009

This paper presents vibration analysis of maskless exposure module in Printed Circuit Board (PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the Finite Element Analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 수산경영론집
• /
• 제44권3호
• /
• pp.47-60
• /
• 2013

A study on the seamen's demand - supply has been focused on early 1990s, and never studied yet since 2007. Because previous studies related to the seamen are very different in conditions the environments around the fishery recently. It is serious problem that the number of domestic semen are decreasing continually. To depend on foreign seamen because of lacking of domestic seamen should be linked closely with the fishing industry environment in our country. Therefore, this study is limited to domestic seamen. Lacking recent domestic seamen, it is the most likely to rise imbalance between demand - supply in the future. Through medium and long term its analysis based on data, we are willing to discover various political subjects for seamen's welfare, the training of manpower, education, etc. To solve these issues, it can be made institutional changes as follows ; First, it is necessary policy-making related the deteriorating employment situation based on its analysis of medium and long term for seamen. Second, it is necessary to overcome a dual system for its management for seamen. Third, it is necessary to improve problems of statistics data for fishery and build a statistical system for seamen. Also, it will be improved a insurance system under 5 ton and strengthen the function for Korean seamen welfare and employment center and must be urgently countermeasures for the minimal unemployment rate through a content development and management of home page. Finally, it will be supplied reliably seamen to improve a practice system for apprentices according to the international regulations(STCW-F) for fishery students.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2595-2618
• /
• 2018

In this paper, we investigate secure communication with the presence of multiple eavesdroppers (Eves) in a two-tier downlink dense heterogeneous network, wherein there is a macrocell base station (MBS) and multiple femtocell base stations (FBSs). Each base station (BS) has multiple users. And Eves attempt to wiretap a macrocell user (MU). To keep Eves ignorant of the confidential message, we propose a physical-layer security scheme based on cross-layer cooperation to exploit interference in the considered network. Under the constraints on the quality of service (QoS) of other legitimate users and transmit power, the secrecy rate of system can be maximized through jointly optimizing the beamforming vectors of MBS and cooperative FBSs. We explore the problem of maximizing secrecy rate in both non-colluding and colluding Eves scenarios, respectively. Firstly, in non-colluding Eves scenario, we approximate the original non-convex problem into a few semi-definite programs (SDPs) by employing the semi-definite relaxation (SDR) technique and conservative convex approximation under perfect channel state information (CSI) case. Furthermore, we extend the frame to imperfect CSI case and use the Lagrangian dual theory to cope with uncertain constraints on CSI. Secondly, in colluding Eves scenario, we transform the original problem into a two-tier optimization problem equivalently. Among them, the outer layer problem is a single variable optimization problem and can be solved by one-dimensional linear search. While the inner-layer optimization problem is transformed into a convex SDP problem with SDR technique and Charnes-Cooper transformation. In the perfect CSI case of both non-colluding and colluding Eves scenarios, we prove that the relaxation of SDR is tight and analyze the complexity of proposed algorithms. Finally, simulation results validate the effectiveness and robustness of proposed scheme.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.118-124
• /
• 2007

The efficiency of the hybrid systems which are composed of compound planetary gear sets depend on the amount of the recirculating energy among the motors and battery. This paper studies the analysis of the system efficiency with the parameters, ${\alpha},\;{\beta},\;{\gamma_a},\;{\gamma_b}$ and $\gamma_s$. The efficiency of the systems and the relative torque, speed and power of the power resources are represented by these parameters. The recuperating parameter $\kappa$ which makes the systems generalized is introduced, so the efficiencies of the modes such as the hybrid mode, the engine mode, the motoring mode and the recuperating mode are analyzed with simple equations. The tendency of the system efficiency according to the variations of the $\gamma_s$ and $\kappa$ are studied, by which it can be possible to reduce the loss of the power because the strategies for avoiding the singular speed ratio $\gamma_s$ are helpful for the system efficiency and specific value of $\kappa$ can increase the efficiency of the systems.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.62-66
• /
• 2017

본 논문에서는 전파강수계의 운영제어 및 자료처리를 위한 통신 및 자료처리 전략을 개발하였다. 전파강수계는 24GHz 대역의 이중편파 관측을 통하여 반경 1km 이내의 강수장을 산출하고 최종적으로 관측지역내의 면적강수를 산출하고자 하는 소형 시스템이다. 소형 시스템의 특성상 시스템 내의 제한된 자원을 활용하되 정확한 강수측정을 위한 방안이 고려되어야 하고 무인운영 및 원격 관리를 목적으로 하기 때문에 네트워크의 사용도 최소화해야 할 필요가 발생한다. 이러한 제한 사항의 극복을 위하여 자료의 품질관리 측면에서는 비기상 에코의 제거를 위해서 퍼지 논리(Fuzzy logic)을 이용한 품질관리 기법을 적용하였고, 강수강도 산출을 위해서 다양한 강수강도 추정식을 활용한 강수장 가중합성 전략을 개발하였다. 또한 가변 통신데이터를 이용하여 전파강수계와 원격지 관리 컴퓨터간의 통신량을 최소화하는 전략을 개발하였다. 이러한 소프트웨어 자료처리 전략개발을 통해 원격지에 설치되어 운영될 전파강수계를 안정적으로 운영할 수 있는 통신 및 자료처리 시스템을 개발할 수 있을 것으로 기대한다.

• 한국통신학회논문지
• /
• 제24권12B호
• /
• pp.2298-2319
• /
• 1999

본 논문에서는 최근 들어 본격적인 연구개발이 활성화되고 있는 무선 데이터 통신서비스를 근간으로 한 미세 정보 감시 시스템(RMIMS : radio interfaced micro information monitoring system or MICROS: micro information and communication remote object-oriented system)에 대한 QoS(quality of service)를 보장하는 새로운 움직이는 기지국(MMBS: moving mobile base station) 서비스 방법을 제안하였다. 미세정보 감시시스템은 독립된 전원 장치 형태로 감시 대상 지역에 영구적으로 혹은 반 영구적으로 배치되므로 매우 저 전력의 시스템 요구 사항을 가진다. 또한 이동서이 작고, 비교적 비 실시간 트래픽 특성과 터미널의 배치 영역에 비해 터미널 수가 작은 특성을 가진다. 상향링크(uplink) 방향의 전송거리가 작고, 특정 일부 지역에 환경오염감시, 안전감시, 재난감시, 군사적인 목적 등 응용서비스에 따라 배치되는 RMIMS 터미널을 서비스하기 위해서는 기존의 셀룰라 망에서 사용되는 고정위치 기지국 방식은 경제성 및 실현성을 제공할 수 없다. 이러한 경우에 RMIMS 터미널들에 대한 정보 수집 데이터 망 (network) 서비스를 위하여 이중 무선 인 股嶽決?dual wireless network interface)을 가지면서 IS-MMBS(in-service MMBS), BS-MMBS(background scanning MMBS)를 사용하는 서비스 구조를 통하여 RMIMS 터미널들에 QoS를 보장하는 무선 데이터 서비스를 제공하는 방법 및 절차들을 제안하였다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.97-102
• /
• 2016

In this paper, a bidirectional power supply charger is proposed. This system used a solar cell panel to generate electricity and used super capacitors to store these energies, which can be used for the robot cleaner or some other electronic products. This system include a phase-shift controlled bidirectional dual active bridge (DAB) converter, solar panel super capacitors and DSP controller. In the daytime it can charge to the super capacitors to store the energy generated by the solar cell panel and in the night it will release the energy stored in the super capacitors to loads. A prototype of the proposed bidirectional power supply charger system was designed which can achieve 18V to 30V input, 10V/20W output to super capacitors and 9V/6.5W output when it acts as a charger for the robot cleaner. The system is verified to be sTable and reliable by both the simulation and experimental results.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.451-460
• /
• 2004

W-CDMA 시스템의 파일럿 비트 패턴은 채널 측정 및 프레임 동기 확인에 사용된다. 본 논문은 이러한 파일럿 패턴의 프레임 동기용 이원부호를 제안한다. 프레임 동기 단어라고 불리는 이러한 이원부호의 자기 상관 및 상호 상관 특성을 이용하여 이상적인 프레임 동기 특성을 구할 수 있는 회로를 제안한다. W-CDMA시스템에서는 두 개의 수신 단말기를 갖지 않고도, 다른 주파수의 측정을 가능하게 하기 위한 압축모드(compressed mode)를 두고 있다. 이 모드에서는 10 msec의 한 프레임 시간 동안에 7 슬랏까지 전송이 중단될 수 있는데, 이러한 경우에 제안된 프레임 동기용 이원부호의 우선 쌍 간의 보완 매핑(complementary mapping) 관계를 이용하면, 이상적인 프레임 동기 특성을 유지 할 수 있음을 보인다. 그리고 우선 쌍 개념, 보완 매핑(complementary mapping) 관계, 최대장부호(maximal length sequence) 개념을 이용하여 제안된 프레임 동기 단어를 생성하는 회로에 관하여 논한다.