• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.375-378
• /
• 2002

This paper describes tile design and implementation of contact and contactless If card OS(Operating System) for Java Card, namely JCOS(Java Card 05). The JCOS complies with ISO/IEC 7816 and IS0/1EC 14443 standards. The JCOS conforms to Java Card 2.1.2 specifications. The JCOS is running on 32-bit ARMTTDMI with public key crypto-coprocssor. This paper describes only the dual-interface protocol of the JCOS which supports contact and contactless applications in a single chip. The JCOS has been completed with our sample banking service and access control service in ETRI up to now.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.9
• /
• pp.1162-1170
• /
• 1995

In this paper, we present a message transfer scheme for efficient message passing in the hierarchically structured multiprocessor computer SPAX(Scalable Parallel Architecture computer based on X-bar network). The message transfer scheme provides interface not only with operating system but also with end users. In order to transfer two types of control message and data message efficiently, it supports both of memory-mapped transfer and DMA-based transfer. Dual-port RAMs are used as message buffers, and control and status registers provide efficient programming interface. Interlaced parity scheme is adopted for error control. If any error is detected at receiving node, errored packet is resent by sender according to retry mechanism. In conjunction with retry mechanism, watchdog timers are used to protect infinite waiting and repeated retry. The proposed message transfer scheme can be applied to input/output nodes and communication connection nodes as well as processing nodes in the SPAX.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.44-50
• /
• 1997

This paper describes the design and test of an on-line non-invasive network performance monitor (hardware portion) for the SPAX parallel computer. The SPAX parallel computer supports up to 256 intel P6 processors with 4 P6 processors constituting a processign node. The nodes are interconnected with a dual two-level crossbar network calle dXcent-net. Since the performance of the SPAX parallel computer is highly dependent on the proper and efficient operation of the network, an on-line non-invasive network performance monitor (with hardware components) has been developed to aid in the monitoring and tunign of the Xcent-net. Successful testing of a prototype node monitor board and PC interface system shows that our monitor design provides a low-cost practical solution to this problem.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.411-412
• /
• 2007

본 논문에서는 인간 청각 시스템의 특징을 이용한 음성명료도 향상 알고리즘을 제안한다. 기존의 연구들은 음성과 잡음이 같이 섞여 있는 Single-Channel에서의 명료도 향상의 대해 주로 다루었다. 하지만 잡음에 섞이기 전의 깨끗한 음성과 주변 잡음이 분리된 Dual-Channel에서의 명료도 향상에 관한 연구는 거의 다루어지지 않았다. 본 논문에서 음성을 잡음이 섞이기 전에 미리 강화시켜 나중에 잡음에 섞였을 때 명료도가 강화되도록 하는 방법을 제안한다. 인간 청각 시스템의 마스킹 효과를 적절히 이용하여 음성을 강화시키는 방법을 사용하였다. 실험 결과 이 방법은 단순히 볼륨만을 높이는 방법에 비해 명료도가 더 향상되는 것으로 나타났다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.253-263
• /
• 1995

In parameter design, Taguchi's stated objective is to find the setting of product or process design parameters that minimize average quadratic loss-that is, the average squared deviation of the response from its target value. Yet in practice to choose the settings of design parameters he maximizeds a set of measures called signal-to-noise(SN) ratios. In general, Taguchi gave no justification for the use the SN ratios and no explanation of why the two-step procedure that he recommened will minimize average loss. The purpose of this study is comparing and analyzing of performance statistics by Leon et al(PerMIA), Box(Transformation theory), Vining & Myers(Dual Response Systems) and Taguchi(Signal-to-Noise ratios).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.531-535
• /
• 2007

To invest the luminescent characteristics of red light emitting OLED device, a dual dopant system was incorporated into the emitting layer. The multiple layer OLED device structure was $ITO(1500\;{\AA})/HIL(200\;{\AA})/a-NPD(600\;{\AA})/EML(300\;{\AA})/Alq_3(200\;{\AA})/LiF(7\;{\AA})/Al(1800\;{\AA})$. The concentrations of the rubrene dopant were tested at 0 vol.%, 3 vol.%, 6 vol.% and 9 vol.%. The maximum device efficiency and life time were obtained at the rubrene dopant concentration of 6 vol.%. Emission spectrum and color coordinate of devices showed no relationship with rubrene dopant concentration. Experiment results show that rubrene dopant absorbs energy from $Alq_3$ host and transfer it to RD1 dopant acting as an energy intermediate and influencing the device efficiency, finally the red light is emitted from the RD1 dopant.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.491-498
• /
• 1996

The development of a compact two-wavelength Nd:YAG laser for dental and ENT applications is presented. The Nd:YAG resonator generates either 1.06$\mu$m or 1.32$\mu$m. The wavelength selection is made at the control panel. The Nd:YAG laser parameters at 1.06$\mu$m are ; the maximum pulse duration of 150$\mu$s, repetition rates of I-100Hz, and the maximum average power of 25W. At 1.32$\mu$m, the pulse duration is the same where the repetition rates and the maximum average power are I-30Hz and lOW respectively. High voltage power supply consists of a simmer module and two identical high voltage DC converters. In order to make a complete medical laser system, an optical fiber delivery unit, foot pedal and water spray handpiece are also developed. The wavelength selection is reliable since no movement of optical or mechanical components is required. The high voltage power supply is compact, easy to be maintained and applicable for other laser systems due to its modular design.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.345-353
• /
• 2013

A W-band Orthomode Transducer (OMT) has been developed for Korean VLBI Network (KVN) polarization observation. The OMT design was based on E-plane split-block technique using septum structure. 3-dimensional electromagnetic simulation was fully employed to optimize the performance of the OMT. Measurements of the fabricated OMT show that the return losses for the vertically and horizontally polarized modes are better than -20 dB across 80 ~ 108 GHz and the insertion losses for the both modes are less than 0.47 dB. The cross-polarization level of the OMT is less than -30 dB. The bandwidth of the developed OMT is estimated as around 30%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.96-106
• /
• 2002

Many modern guided weapon systems employ sophisticated target sensors as well as powerful computing systems. Due to such advanced features, they are required to achieve better guidance accuracy, and at the same time other guidance objectives for better weapon effectiveness and survivability. In this paper, we overview some of the technical considerations in such advanced guidance algorithm development, and briefly look at some related research works. More specifically, we discuss impact angle control, time-varying nature of the guidance system, time-to-go estimation, guidance loop stability, effect of autopilot lag and physical limitations in control variables, parasitic paths in guidance loops, etc. We also briefly look at some advanced concepts such as integrated guidance and control loop design, target adaptive guidance, guidance law development based on dual control concept, and terminal evasive maneuver.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.358-360
• /
• 2004

최근 전자상거래의 활성화와 더불어 기존의 유선인터넷에서 시용하고 있는 전자지갑(S/W) 등 전자상거래 방식에서 Smart Card나 이동통신 단말기와 같은 독립적인 유/무선 단말을 사용하는 전자지불 시스템에 대한 관심이 고조되고 있다. 본 연구에서는 전자지불 시스템에 Bluetooth를 이용하여 안전한 사용자 인증 및 종단간의 보안을 제공 전자화폐의 발행/지불이 가능한 전자지불 시스템의 모델을 제시하고자 한다. 각 단말의 서브셋(subset)으로 Bluetooth 컨트롤 시스템과 이를 이용하는 전자지불 시스템으로서 전자지갑 및 전자화폐 발행기/지동판매기를 구현하여 각각의 보안 통신과 전자화폐의 발행/지불이 가능함을 나타냈다. 구현 결과물은 실제 전자지불 시스템에 적용이 가능할 것으로 보인다.