• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.206-215
• /
• 2013

In this paper, a synchronization control technique of dual-servo motor driven press system is proposed. An independent cascade PID control technique has been applied to the conventional press system for advancement of control stability. However, it is not easy to reduce synchronous error using the independent cascade PID control technique when some different load disturbances are involved in each motor. The eccentric error of the slide caused by the problem degrade the control performance of the BDC(Bottom Dead Center). In order to achieve reduction of the synchronous error between two servo motors and accurate position control simultaneously, a new control scheme comprised with cascade PID control loop and cross-coupling loop is proposed. In simulation using Matlab SIMULINK, the AC servo system is designed. The control performance of proposed technique is compared with conventional control technique to the model of AC servo system. Also, the sub-scale model of dual-servo motor driven press system which can replicate the slide motion is constructed for experimental verification for the performance of the proposed control technique. The cross-coupling control technique reveals more precise and stable performances in the position and synchronization controls.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.869-886
• /
• 2018

Rockbolt is one of the most common supports used to reinforce discontinuous rock during underground excavation. Extra drain pipes are installed to improve excavation workability and the anchorage of rockbolts in water bearing ground. The drain pipe is effective in improving the workability by providing drainage path, but it is difficult to expect the reinforcement effect, increasing disturbance of the discontinuous rock mass and the construction cost. To solve this problem, dual purpose rockbolt (DPR) has been developed for the reinforcement of rock and the drainage of ground water. DPR was able to improve the mechanical and hydraulic stability of the rocks quickly and economically. Two kinds of DPRs using FRP (Fiber Reinforced Plastic) and steel were investigated for the mechanical and hydraulic performance. Also, the workability and stability of DPR were analyzed.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.193-197
• /
• 2010

In terms of the system efficiency, it is very useful to apply the ejector into the fuel recirculation system of a fuel cell system since the ejector needs no parasitic power to operate. Since the conventional automotive fuel cell use hydrogen and air as their fuel, the only hydrogen is needed to be recirculated for the better fuel efficiency. On the other hand, the submarine fuel cell needs both hydrogen and oxygen recirculation systems because the submarine drives under the sea. In particular, the cathodic recirculation has to meet the tougher target since the oxygen based pressurized stack generally used in the submarine applications generates the significant amount of the water in the stack during the operation. Namely, the oxygen utilization has designed less than 50% in the whole operating range for the better exhausting of the generated waters. And thereby in terms of the oxygen utilization, the entrainment ratio of the ejector should be more than 1 within the whole operating range. However, the conventional ejector using a constant nozzle can not afford to satisfy the mentioned critical requirement. To overcome the problem, the dual-ejector and its control strategy are designed. The performance of the proposed dual-ejector is verified by the experiments based on the real operating conditions of the target submarine system. Furthermore, the proposed design method can be used for the other fuel recirculation system of a large-scale fuel cell system with the critical requirement of the fuel utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.377-384
• /
• 2013

In order to improve the security strength in the password based user authentication, in which the security vulnerability is increased while the same password is repeatedly used, the OTP(One-Time Password) system has been introduced. In the OTP systems, however, the user account information and OTP value may be hacked if the user PC is infected by the malicious codes, because the user types the OTP value, which is generated by the mobile device synchronized with the server, directly onto the user PC. In this paper, we propose a new method, called DTOTP(Dual Transmission OTP), to solve this security problem. The DTOTP system is an improved two-factor authentication method by using the dual transmission, in which the user performs the server authentication by typing the user account and password information onto the PC, and then for the OTP authentication the mobile device scans the QR code displayed on the PC and the OTP value is sent to the server directly. The proposed system provides more improved security strength than that of the existing OTP system, and also can adopt the existing OTP algorithm without any modification. As a result, the proposed system can be safely applied to various security services such like banking, portal, and game services.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.703-709
• /
• 2014

In the AMP(Asymmetric Multiprocessing) based dual core using core-specific operating system in a single processor system, shared memory method is used to send data between processors in dual core. To used shared memory in different operating systems, there is a problem of needing to solving the issue of message communication and synchronization between the two operations systems. In this paper, separate memory controller was used for data sharing between different processor cores in dual core environment. This controller can designate two slave ports to allow simultaneous access from two processors, and in the case of process data simultaneously by two processors, priority order of slave ports is determined through memory mediator. When sending data from A to B processor, SRAM area was logically separated into 8 pages. It allowed using memory area from multiple processes with the size of 4KByte per page, and control register with the size of 4Byte was used to discern the usability of current page.

• Journal of Practical Engineering Education
• /
• v.8 no.1
• /
• pp.63-68
• /
• 2016

As job mismatch intensifies in the employment market, the work based learning has emerged as a solution to this social problem. The so called Korean dual education system is expected to raise jobseekers equipped with knowledge and skills demanded by industry. This study intends to recommend an effective operational model for contracted education programs at higher institutions in order to support soft landing of Korean dual education system. Students of contracted education programs are adults graduated from vocational high schools and working for companies during weekdays. In consideration of the difficulties experienced by employee students, more flexible operation of academic affairs is required. To address these challenges, the recommended contracted education model includes such beneficial features as S-OJT courses, standard curriculum based on National Competency Standard, recognition of prior learning, flipped classroom, and tutoring system. In the last part, several directions for implementing the new contracted education model are discussed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.2
• /
• pp.417-429
• /
• 2019

WPA2-PSK uses a 4-way handshake protocol based on a shared secret to establish a secure session between a client and an AP. It has various security problems such as eavesdropping attacks and the secure session establishment process is inefficient because it requires multiple interactions between client and AP. The WPA3 standard has recently been proposed to solve the security problem of WPA2, but it is a small improvement using the same 4-way handshake methodology. OAuth 2.0 token authentication is widely used on the web, which can be used to keep an authenticated state of a client for a long time by using tokens issued to an authenticated client. In this paper, we apply the dual-token based randomized token authentication technology to the Wi-Fi security protocol to achieve an efficient Wi-Fi security protocol by dividing initial authentication and secure session establishment. Once a client is authenticated and equipped with dual tokens issued by AP, it can establish secure session using them quickly with one message exchange over a non-secure channel.

• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.43-50
• /
• 2021

Pump-cap is a device for discharging the contents stored inside a container to the outside of the container by a simple operation by a certain amount. In particular, in recent years, as the number of cosmetic products made of functional materials has rapidly increased, the development of convenient containers for functional materials is being actively conducted. Among these, there are a growing number of products that show their efficacy only by mixing two components, so the development of a dual pump cap container is necessary. However, the conventional dual pump cap container has a problem in that it is difficult to implement a quantitative discharge as solutions having different viscosities are used. Therefore, in this study, a discharge port of a dual pump cap that can apply an optimal ratio was designed by analyzing the discharge amount of two components with different viscosities through computational fluid dynamics. Since the discharge amount is affected by the size of the discharge port, the higher the viscosity of the solution, the larger the discharge port should be set. Conversely, the lower the viscosity, the smaller the discharge port should be. Through this, it is possible to dispense a fixed amount of a heterogeneous solution by one pumping, and it is determined that the user's convenience will increase.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.251-257
• /
• 2023

In this paper, we propose a dual-structured self-attention method that improves the lack of regional features of the vision transformer's self-attention. Vision Transformers, which are more computationally efficient than convolutional neural networks in object classification, object segmentation, and video image recognition, lack the ability to extract regional features relatively. To solve this problem, many studies are conducted based on Windows or Shift Windows, but these methods weaken the advantages of self-attention-based transformers by increasing computational complexity using multiple levels of encoders. This paper proposes a dual-structure self-attention using self-attention and neighborhood network to improve locality inductive bias compared to the existing method. The neighborhood network for extracting local context information provides a much simpler computational complexity than the window structure. CIFAR-10 and CIFAR-100 were used to compare the performance of the proposed dual-structure self-attention transformer and the existing transformer, and the experiment showed improvements of 0.63% and 1.57% in Top-1 accuracy, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.921-940
• /
• 2015

In this paper, we investigate the multi-resource allocation problem, a unique feature of which is that the multiple resources can compensate each other while achieving the desired system performance. In particular, power and time allocations are jointly optimized with the target of energy efficiency under the resource-limited constraints. Different from previous studies on the power-time tradeoff, we consider a multi-server case where the concurrent serving users are quantitatively restricted. Therefore user selection is investigated accompanying the resource allocation, making the power-time tradeoff occur not only between the users in the same server but also in different servers. The complex multivariate optimization problem can be modeled as a variant of 2-Dimension Bin Packing Problem (V2D-BPP), which is a joint non-linear and integer programming problem. Though we use state decomposition model to transform it into a convex optimization problem, the variables are still coupled. Therefore, we propose an Iterative Dual Optimization (IDO) algorithm to obtain its optimal solution. Simulations show that the joint multi-resource allocation algorithm outperforms two existing non-joint algorithms from the perspective of energy efficiency.