• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.137-144
• /
• 2010

In light of the growing traffic congestion problem and congestion cost, the container transport by railway has to be increased. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the DMT(Dual Mode Trailer) transport system which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. The DMT transport will therefore serve the areas required by transport organizers. The purpose of this paper is to estimate economical feasibility analysis for development of DMT transport system. Consequently, this study analyzed the characteristics of the DMT system. The horizontal load.unload system is being considered as an adoptable DMT system in consideration of the situation in Korea.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.55-56
• /
• 2006

Directional antennas are used to improve spatial reuse, but have the problem of deafness. The DUDMAC protocol uses the ORTS, OCTS, DDATA, and DACK mechanisms and a blocking algorithm for directional transmissions. In this paper, we propose a tone dual-channel directional MAC (Tone DUDMAC) protocol to improve spatial reuse. The Tone DUDMAC protocol uses the ORTS, DCTS, DDATA, and DACK mechanisms including the DDATA_tone and OCTS_tone. We use ORTS as that in DUDMAC because of location unawareness of neighbor's nodes. The DDATA_tone and OCTS_tone reduce a blocking area and improve spatial reuse. We confirm the throughput performance of the proposed MAC protocol by computer simulations using Qualnet ver.3.8 simulator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2001.05b
• /
• pp.1133-1138
• /
• 2001

The focus of this paper is on the numerical investigation of obliquely incident wane interactions with a system composed of full submerged and floating dual buoy/vertical-flexible-membrane breakwaters placed in parallel with spacing. The fully submerged systems allow surface and bottom clearances to enable wave transmission over and under the system. The problem is formulated based on the two-dimensional multi-domain hydro-elastic linear wave-body interaction theory. The hydrodynamic interaction of oblique incident waves with the combination of the rigid and flexible bodies was solved by the distribution of the simple sources (modified Bessel function of fille second kind) tat satisfy the Helmholz governing equation. Using this computer program, the performance of various dual systems varying buoy radiuses and drafts, membrane lengths, clearances. spacing, mooring-lines stiffness, mooring types, water depth, and wave characteristics is thoroughly examined. It is found that the fully submerged and floating dual buoy/membrane breakwaters call, if it is properly tuned to the coming waves, have good performances ill reflecting the obliquely incident waves over a tilde range of wave frequency and headings.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.2903-2923
• /
• 2023

Knowledge recommendation is a type of recommendation system that recommends knowledge content to users in order to satisfy their needs. Although using graph neural networks to extract data features is an effective method for solving the recommendation problem, there is information loss when modeling real-world problems because an edge in a graph structure can only be associated with two nodes. Because one super-edge in the hypergraph structure can be connected with several nodes and the effectiveness of knowledge graph for knowledge expression, a dual-channel hypergraph convolutional neural network model (DCHC) based on hypergraph structure and knowledge graph is proposed. The model divides user data and knowledge data into user subhypergraph and knowledge subhypergraph, respectively, and extracts user data features by dual-channel hypergraph convolution and knowledge data features by combining with knowledge graph technology, and finally generates recommendation results based on the obtained user embedding and knowledge embedding. The performance of DCHC model is higher than the comparative model under AUC and F1 evaluation indicators, comparative experiments with the baseline also demonstrate the validity of DCHC model.

• Structural Engineering and Mechanics
• /
• v.90 no.5
• /
• pp.459-466
• /
• 2024

Eringen's nonlocal thermoelasticity theory is used to study wave propagations in a rotating two-temperature thermoelastic half-space with temperature-dependent properties. Using suitable non-dimensional variables, the harmonic wave analysis is used to convert the partial differential equations to ordinary differential equations solving the problem. The modulus of elasticity is given as a linear function of the reference temperature. MATLAB software is used for numerical calculations. Comparisons are carried out with the results in the context of the dual-phase lag model for different values of rotation, a nonlocal parameter, an inclined load, and an empirical material constant. The distributions of physical fields showed that the nonlocal parameter, rotation, and inclined load have great effects. When a nonlocal thermoelastic media is swapped out for a thermoelastic one, this approach still holds true.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1778-1790
• /
• 2018

Based on the requirements and characteristics of multi-zone autonomous decision-making in modern power system, fully distributed computing methods are needed to optimize the economic dispatch (ED) problem coordination of multi-regional power system on the basis of constructing decomposition and interaction mechanism. In this paper, four fully distributed methods based on alternating direction method of multipliers (ADMM) are used for solving the ED problem in distributed manner. By duplicating variables, the 2-block classical ADMM can be directly used to solve ED problem fully distributed. The second method is employing ADMM to solve the dual problem of ED in fully distributed manner. N-block methods based on ADMM including Alternating Direction Method with Gaussian back substitution (ADM_G) and Exchange ADMM (E_ADMM) are employed also. These two methods all can solve ED problem in distributed manner. However, the former one cannot be carried out in parallel. In this paper, four fully distributed methods solve the ED problem in distributed collaborative manner. And we also discussed the difference of four algorithms from the aspects of algorithm convergence, calculation speed and parameter change. Some simulation results are reported to test the performance of these distributed algorithms in serial and parallel.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.71-81
• /
• 2014

Time synchronization system using dual frequency bands is designed and the error sources are analyzed for alternative synchronized-pseudolite navigation system (S-PNS) which aims at military application. To resolve near/far problem, dual frequency band operation is proposed instead of pulsing transmission which degrades level of reception. In dual frequency operation H/W delay should be considered to eliminate errors caused by inter-frequency bias (IFB) difference between the receivers of the pseudolites and users. When time synchronization is performed across the sea, multipath error is occurred severely since the elevation angle between pseudolites is low so total reflection can be happened. To investigate the difference of multipath effects according to location, pseudolites are set up coastal area and land area and performances are compared. The error source related with tropospheric delay is becoming dominant source as the coverage of the PNS is broadening. The tropospheric delay is measured by master pseudolite receiver directly using own pseudorange and slave pseudorange. Flight test is performed near coastal area using S-PNS equipped with developed time synchronization system and test results are also presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.12
• /
• pp.1624-1634
• /
• 1997

A numerical study on two-dimensional unsteady transonic cascade flow has been performed by adopting dual time stepping and the k-.omega. turbulence model. An explicit 4 stage Runge-Kutta scheme for the compressible Navier-Stokes equations and an implicit Gauss-Seidel iteration scheme for the k-.omega. turbulence model are proposed for fictitious time stepping. This mixed time stepping scheme ensures the stability of numerical computation and exhibits a good convergence property with less computation time. Typical steady-state convergence accelerating schemes such as local time stepping, residual smoothing and multigrid combined with dual time stepping shows good convergence properties. Numerical results are presented for unsteady laminar flow past a cylinder and turbulent shock buffeting problem for bicircular arc cascade flow is discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.407-411
• /
• 1998

Traditional carrier-based PWM method cannot produce maximum output voltage due to dead-time compensation, w which results in degradation of voltage utilization factor compared with ideal PWM inverters, Dual-carrier PWM has b been proposed as an alternative method to solve this problem. But this method requires paying attentition to changing r reference voltage in the vicinity of maximum voltage to ensure enough dead-time. Novel dual-carrier PWM method and i it's practical implementation is proposed in this paper. The reference voltage can be changed without any restriction in t this method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.223-226
• /
• 2003

We propose an improvement method for a $\underline{G}ate$ $\underline{OX}ide(GOX)$ thinning at the edge of $\underline{S}hallow$ $\underline{T}rench$ $\underline{I}solation(STI)$, when STI is adopted to Dual Gate Oxide(DGOX) Process. In the case of SOC(System On-a-Chip), the DGOX process is usually used for realizing both a low and a high voltage parts in one chip. However, it is found that the severe GOX thinning occurs from at STI top edge region and a dent profile exists at the top edge of STI, when conventional DGOX and STI process carried out in high density device chip. In order to overcome this problem, a new DGOX process is tried in this study. And we are able to prevent the GOX thinning by H2 anneal, partially SiN liner skip, and a method which is merged a thick sidewall oxide(S/O) with a SiN pull-back process. Therefore, a good subthreshold characteristics without a double hump is obtained by the prevention of a GOX thinning and a deep dent profile.