• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.507-512
• /
• 2010

The effects of pretreatment by freezing on juice expression and drying characteristics of Prunus mume fruit were investigated. Fresh fruit slices were frozen at $-20^{\circ}C$, thawed, and then either pressed (to yield juice) or dried. Fresh fruit slices were used as controls. Both juice yield and drying rate were higher when pre-frozen fruit was tested, compared to fresh fruit. The L and b color values were lower in the juice and dried powder of pre-frozen compared to fresh fruit. The a color value was higher in juice and powder prepared from pre-frozen fruit compared to fresh fruit. There was no significant difference in free sugar or organic acid content between juices and powders from pre-frozen and fresh fruit. None of soluble solid content, titratable acidity, or juice pH was affected by freezing pretreatment. The results suggest that such pretreatment may be useful to increase juice yield and drying rate. However, browning of juice and powder may be elevated.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.345-363
• /
• 2020

This study was conducted to identify the effect of kerfing and incising pretreatments on high-temperature drying characteristics of cedar and larch boxed-heart timbers with a cross section of less than 150 mm. The result showed that the pretreatments have made a significant difference regarding surface check and shrinkage. Although the kerfing was suitable as a pretreatment to reduce the occurrence of surface check, the incising was not suitable as a pretreatment since the knives of timber joined together, causing the conversion to the surface checks. The shrinkage showed a significant result that the final moisture content was reduced in the order of incising, kerfing, and kerfing-incising after the drying process based on the pretreatment condition. Twist was more affected by the grain angle than the anisotropy of the juvenile wood, and there was no effect of pretreatments.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.677-684
• /
• 2016

This study was carried out to confirm the effects of the knife-incising and longitudinal kerfing treatment on high-temperature drying characteristics of red pine square timber with dimensions of thickness 15 cm. The range of final moisture content was investigated 5.6% to 7.5% after drying. The differences did not exist in the moisture content and distribution according to the pretreatment condition. In the case of longitudinal kerfing treatment, the surface check occurrence was reduced than the control. In addition, the twist had a tendency to decrease due to the longitudinal kerfing treatment. The knife-incising and longitudinal kerfing treatment were investigated to be ineffective on internal checks and drying shrinkage.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.66-71
• /
• 1994

To increase drying rate and reduce drying degradation, pretreatments such as prefreezing and presteaming have been widely used in wood industries. Presteaming lumbers prior to kiln drying is known positively to improve its permeability, to increase diffusion coefficient and to reduce discoloration, but negatively to increase collapse. Prefreezing lumbers prior to kiln drying is also known to reduce significantly its drying defects and its shrinkages. Thus it is no doubt that the pretreated lumbers shrink diversely from the untreated. In this study the shrinkage behaviors of the pretreated specimens are investigated by drying two tropical hardwoods (Apitong and Taun) in three different dying conditions: high temperature and slow drying rate (drying in a closed cylinder), high temperature and rapid drying rate (drying in an oven) and low temperature and slow drying rate(drying at room temperature). The prefrozen specimens show the least volumetric shrinkages in most drying conditions. The specimens dried in cylinders shrink most among all drying conditions. In general the pretreated specimens reached the 30 % moisture content faster than the untreated by about 30 %.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.12
• /
• pp.1599-1604
• /
• 2022

Storage stability of freeze-dried lactic acid bacteria is a critical factor for their cost-effectiveness. Long-term storage of lactic acid bacteria enables microbial industry to reduce distribution costs. Herein, we investigated the effect of cold adaptation under supercooling conditions at -5℃ on the viability of Leuconostoc mesenteroides WiKim32 during the freeze-drying process and subsequent storage. Cold adaptation increased the thickness of exopolysaccharides (EPS) and improved the viability of freeze-dried Leu. mesenteroides WiKim32. Compared to non-adapted cells, cold-adapted cells showed a 35.4% increase in EPS thickness under supercooling conditions. The viability of EPS-hydrolyzed cells was lower than that of untreated cells, implying that EPS plays a role in protection during the freeze-drying process. Cold adaptation increased the storage stability of freeze-dried Leu. mesenteroides WiKim32. Fifty-six days after storage, the highest viability (71.3%) was achieved with cold adaptation at -5℃. When EPS-containing broth was added prior to the freeze-drying process, the viability further increased to 82.7%. These results imply that cold adaptation by supercooling pretreatment would be a good strategy for the long-term storage of Leu. mesenteroides WiKim32.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.3
• /
• pp.251-256
• /
• 2004

This study was conducted to find the optimum pretreatment method to improve the quality of Pleurotus eryngii pickled with the fermented soybean paste. Blanching(70 , 10min), salting(5%, 20 , 72hr) and drying(50 , 3hr) were used as pretreatment methods. The moisture loss of the mushrooms during pickling was accelerated more by salting and drying. Salinity increase was retarded by salting. Surface and internal browning of the mushrooms were suppressed by blanching. Hardness tended to increase sharply until 20 days of pickling and then slowly decreased. In the sensory evaluation, mushrooms pickled for 40 days were scored as the highest. Blanching was a superior treatment compared to the others in term of color, taste, flavor, texture and overall acceptability.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.305-314
• /
• 1998

In the drying process, many undesirable physicochemical changes occur that influence dried food product qualities. Pretreatments method is used to reduce the deterioration of dried food product qualities such as color, flavor, texture, rehydration ability and retention of nutrients. The methods of pretreatments are blanching, chemical treatment and osmotic dehydration. Osmotic dehydration is a water removal process which is based on placing foods in a concentrated osmotic solution or in a dry osmotic material. A large number of process variables have a significant effect on process and final product quality. In order to improve final product quality it is necessary to know the role of each process variable and understand the mecanisms throughout the process. Osmotic dehydration is a valuable processing tool with great future in minimal processing of fruits and vegetables.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1242-1248
• /
• 2013

This study was performed to determine the effects of pretreatment (NT: non-treatment, BTS: boiling treatment with 3% sodium chloride, DTG: dipping treatment in glycerol) and drying methods (sun drying, hot air drying, and cold air drying) on the physicochemical properties and antioxidant activities of dried jujube (Zizyphus jujuba Mill.) fruits. Our results show that moisture content is lower (P<0.05) with DTG, and that moisture content is lower with hot air drying compared to other drying methods. The bulk density was highest with BTS. The soluble solids content was highest with DTG. Additionally, the soluble solids content were highest in the following order: hot air drying> cold air drying> sun drying. The titratable acidity of hot air drying was highest of all the drying methods. The titratable acidity was higher with NT and DTG, and the brix and acid ratio of sun drying was higher than other drying methods. Among the drying methods, BTS showed the best browning-retarding effect, whereas boiling treatment affected quality and color. The total polyphenol content from hot air drying and NT or DTG treatment was relatively higher than the content from BTS. The flavonoid content was highest with BTS, and all dried jujube showed relatively high antioxidant activities. The sensory evaluation results indicated that the organoleptic scores for overall preference were higher in the NT and DTG treatment groups. These results suggest that pretreatment and drying methods affect the quality of dried jujube fruit, and show that glycerol treatment with hot air drying can be applied to the production of high quality dried jujube.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.51-58
• /
• 2020

As interest in lunar exploration increases, studies on lunar surface environment simulation including a lunar soil simulant are being conducted. One of the problems when creating a vacuum environment with lunar soil is that it takes long time to reach high vacuum due to outgas from the soil. Most of the outgas is water, and the time to reach high vacuum can be significantly reduced by a pretreatment process that removes moisture adhering to the surface of the lunar soil before putting soil into a vacuum chamber. The existing soil drying methods were examined to determine how these methods were effective to remove moisture from the lunar simulant soil. Drying experiments of lunar soil samples were carried out using a dry oven, a microwave oven, direct heating method and a vacuum oven, and the results of the drying experiment were presented. Drying soil at 110℃ using a dry oven and drying soil by a microwave oven were not enough to remove moisture, and vacuum oven drying method and direct heating drying method at more than 200℃ were effective in water removal.