• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1149-1153
• /
• 2002

CH4/CO2 dry reforming was carried out to make syn gas on the Ni/Al2O3 catalysts calcined at different temperatures. The Ni/Al2O3 (850 $^{\circ}C)$ catalyst gave good activity and stability w hereas the Ni/Al2O3 $(450^{\circ}C)$ catalyst showed lower activity and stability. The NiO/Al2O3 catalyst calcined at $850^{\circ}C$ for 16 h (Ni/Al2O3 $(850^{\circ}C))$ formed the spinel structure of nickel aluminate, which was confirmed by TPR. The carbon formation rate on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was very low till 20 h, and then steeply increased with reaction time without decreasing the activity for CH4 reforming. The Ni/Al2O3 $(450^{\circ}C)$ catalyst showed high carbon formation rate at the initial reaction time and then, the rate nearly stopped with continuous decreasing the activity for CH4 reforming. Even though the amount of carbon deposition on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was higher than that on the Ni/Al2O3 $(450^{\circ}C)$ catalyst, the activity for CH4ing was also high, which could be attributed to the different type of the carbon formed on the catalyst surface.

• Plant Resources
• /
• v.7 no.3
• /
• pp.206-210
• /
• 2004

In order to find out the optimum harvest (dipping) date combined with sowing date on yield and nutrient quality of forage rye which is suitable at the Southern part of Korea, Paldanghomil variety was grown Sep. 2001 to May 2002 at Sunchon National University, and yield and nutrient quality of plant were observed. As harvest date and sowing date were delayed, the plant length was longest, number of leaves per plant was increased in the time of May 20 clipping. Fresh yield was the heaviest in the time of May 20 clipping and Oct. l0 sowing, and the most dry matter yield was the heaviest in the time of May 20 clipping and Oct. 10 sowing. Content of crude protein was the highest and that of crude fiber such as NDF, ADF, hemicellulose, cellulose and lignin were the lowest in the late time of clipping and sowing. Further more IVDMD was high and dry matter yield and digestible dry matter yield were the highest in the time of May 20 dipping and Oct. 10 sowing. Judging from the results reported above, at optimum harvest (dipping) date combined with sowing date for yield and nutrient quality of forage rye seemed to be the time of May 20 clipping and Oct. 10 sowing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.391-399
• /
• 2001

Three-dimensional dynamic analysis of underground openings subjected to explosive loadings considering the effects of water saturation is carried out in this study. The surrounding rock mass is assumed to be the limestone with 13.5% of porosity. Two calculations are compared using as identical explosive charge; the first in dry rock of 13.5% porosity, the second in the identical rock, but in a fully saturated condition. It is shown that velocity, displacement, and stress time histories are higher in saturated rock than those in dry rock through numerical studies. It is also shown that underground openings in saturated rock masses could be significantly more vulnerable to the potential damages associated with shear failure than those in dry medium.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.215-222
• /
• 2014

This paper presents an experimental study of a vibration-assisted dry micro-wire electrical discharge machining (${\mu}$-WEDM) utilized in high precision and micro-manufacturing area. The assisted vibration was applied to the workpiece using a piezoelectric actuator, and high pressure air was injected directly into the machining gap through a nozzle. Investigation experiments were performed to estimate the importance of input parameters and it was observed from experiment results that the width (kerf) of the cutting slot and the machining time were significantly affected by the air injection pressure and input energy. Moreover, it was also observed that there exists an optimal relationship between the machining time and input parameters including the air pressure and vibration frequency and amplitude. Central composite design based experiments were also carried out, and empirical models of the machining time and cutting slot kerf have been developed using the response surface methodology to analyze and optimize the process.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.74-79
• /
• 2002

Two consecutive green house experiments were carried out to examine the effect of Azospirillum spp. inoculation on growth, nitrogen and phosphorus accumulation in maize plants grown in pots. There were eight treatments including an uninoculated control and Azospirillum strains OAD-3, OAD-9, AZ-22, AZ-8, AZ-9, Azospirillum brasilense BR-11001 and Azospirillum lipoferum BR-11080. The inoculated plants showed higher values in each of the following measurements; plant height, total dry mass and nitrogen and phosphorus accumulation in shoot when compared to the uninoculated control plants in two consecutive experiments conducted in the same soil. Among Azospirillum strains, Azospirillum sp. OAD-3 inoculated plants showed higher nitrogen accumulation by 44.5% and 45.1%, total dry mass by 48.6% and 66.9% in two consecutive experiments respectively. The nitrogen concentration in the maize plants was not changed significantly in the first experiment, however it increased significantly in the second experiment due to Azospirillum inoculation. In addition, Azospirillum sp. OAD-9 and A. brasilense BR-11001 also proved to be effective with respect to total dry mass, total nitrogen accumulation and total phosphorus accumulation. The nitrogen concentrations in maize plants were increased in the second experiment due to Azospirillum inoculation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.3
• /
• pp.137-140
• /
• 1990

This study was carried out to investigate the effects of slope exposure and altitude on the dry matter yield and on the grass quality in mountain pasture for 2-year period from 1986 to 1987. 1. Dry matter yield and crude protein content of grasses by slope exposure in mountain pasture were higher on the northern slope than that on the southern slope and, on both sides of slope, were increased as the altitude was high. 2. Neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents, and in vitro dry matter digestibility were not different between different slope exposures and between different altitudes.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.271-278
• /
• 2019

In recent years, the crack accidents of earth and rockfill dams occur frequently. It is urgent to study the tensile strength and tensile failure mechanism of the gravelly soil in the core for the anti-crack design of the actual high earth core rockfill dam. Based on the self-developed uniaxial tensile test device, a series of uniaxial tensile test was carried out on gravelly soil with different gravel content. The compaction test shows a good linear relationship between the optimum water content and gravel content, and the relation curve of optimum water content versus maximum dry density can be fitting by two times polynomial. For the gravelly soil under its optimum water content and maximum dry density, as the gravel content increased from 0% to 50%, the tensile strength of specimens decreased from 122.6 kPa to 49.8 kPa linearly. The peak tensile strain and ultimate tensile strain all decrease with the increase of the gravel content. From the analysis of fracture energy, it is proved that the tensile capacity of gravelly soil decreases slightly with the increasing gravel content. In the case that the sample under the maximum dry density and the water content higher than the optimum water content, the comprehensive tensile capacity of the sample is the strongest. The relevant test results can provide support for the anti-crack design of the high earth core rockfill dam.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.305-318
• /
• 2022

Permeable reactive barriers used for groundwater treatment require proper estimation of the reactive material behavior regarding the emplacement method. This study evaluates the dry emplacement of zeolite (clinoptilolite) to be used as a reactive material in the barrier by carrying out several geotechnical laboratory tests. Dry zeolite samples, exhibited higher wetting-induced compression strains at the higher vertical stresses, up to 12% at 400 kN/m². The swelling potential was observed to be limited with a 3.5 swell index and less than 1% free swelling strain. Direct shear tests revealed that inundation reduces the shear strength of a dry zeolite column by a maximum of 10%. Falling head permeability tests indicate decreasing permeability values with increasing the vertical effective stress. Regarding self-loading and inundation, the porosity along the zeolite column was calculated using a proposed 1D numerical model to predict the permeability with depth considering the laboratory tests. The calculated discharge efficiency was significantly decreased with depth and less than 2% relative to the top for barrier depths deeper than 20 m. Finally, the importance of directional dependence in the permeability of the zeolite medium for calibrating 2D finite element flow analysis was highlighted by bench-scale tests performed under 2D flow conditions.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2010

The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results, we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.56-63
• /
• 2004

This study was carried out to find out the effect of by-product gypsum(phosphogypsum, PG) application on enhancement of turf quality. For the first experiment, 10 ton $ha^{-1}$ PG was applied to 1m${\times}$10m (width${\times}$length) Plots with 4 replicates on a sloping area of fairway where turf(Zoysia japonica L.) was grown. Both top- and sub-soil samples were collected before and after treatment and were analyzed for pH, EC(e1ectrica1 conductivity), Ca and Mg contents. At the same time when soil samples were collected, specific color difference sensor value(SCDSV) that represented chlorophyll contents, fresh and dry weight of the turf were determined to find out the effect of PG treatment on turf growth. SCDSV of turf from PG treated plots measured at 98 and 147 days after treatment were significantly higher than those from control. Considering higher fresh and dry weight of leaf per unit area from PG treated plots than that from control, it was concluded that the elevated Ca and S level of the PG treated plots resulted in vigorous leaf growth of turf. For the second experiment 2, 5 and 10 ton $ha^{-1}$ PG were applied to 1m${\times}$10m(width${\times}$length) Plots with 3 replicates at a closer location as was used for the first experiment to find out the appropriate PG application rate. Before and after treatment soil and plant samples were collected and were analyzed by the same way as the first experiment. The pH of all the soil samples collected from PG treated plots at 38 days after treatment was lower than that from control. This trend changed as time passed. However, the pH of the soil from 10 ton $ha^{-1}$ PG treated plot was lower than that from control during the whole period of the second experiment. SCDSV, fresh and dry weight of leaf from PG treated plots at all 3 rates were higher than those from control for the second experiment. PG application to turf will be beneficial for both mass consumption of by-product gypsum and enhancement of turf quality.