• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.486-493
• /
• 2008

Safflower red colorants extracted by two solvents including the traditional ash solution and $K_{2}CO_{3}$ solution was used for dyeing cotton, ramie, viscose rayon, silk, wool, and nylon fabrics. The effects of extraction solvents on the reflectance, K/S value, and color properties of the dyed fabrics were investigated. Wash/dry cleaning and light colorfastness were evaluated. Reflectance curves of cotton, ramie, viscose rayon, and silk fabrics dyed with red colorants extracted by $K_{2}CO_{3}$ solution were similar, showing the maximum absorption at 520nm, to that of the dyed fabrics with red colorants extracted by ash solution. The reflectance curves of wool and nylon fabrics were different, showing the maximum absorption at 400nm. K/S values of dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution with the exception of nylon. $L^{*},\;a^{*},\;b^{*}$, and $C^{*}$ of the dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution except for $L^{*}$ of nylon and $b^{*}$ of viscose rayon. Color difference(${{\Delta}E}^*$) of the dyed fabrics between ash solution and $K_{2}CO_{3}$ solution increased in the order named as cotton, silk, ramie, viscose rayon, wool, and nylon. Regardless of extraction solvents, safflower red colorants produced RP color on cotton, ramie, and nylon, R color on viscose rayon and silk, and YR color on wool. Wash/dry cleaning fastness of the dyed fabrics was high above 3/4 rating but light fastness was very poor. It is considered that the use of $K_{2}CO_{3}$ solution instead of the traditional ash solution would be more effective in terms of color reproducibility and extraction process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.412-421
• /
• 2012

The yerba mate that grows in the subtropical forests of South America is an evergreen tree within the Aquifoliaceae family. The yerba mate (Ilex paraguariensis) tea is habitually used as a drink in Argentina, Paraguay, Uruguay, and Southern Brazil. A wild mate tree needs about 25 years to fully grow to 15 a height of meters; however, they only grow to a height of 3-5 meters when cultivated. The leaves are 7-11 cm long and 3-5cm wide with a serrated margin. Yerba mate tea-based beverages are made from the leaves and stems of the mate tree. It is known that they contain a rich content of antioxidants and polyphenol, vitamins, amino acids, minerals and colorants. Dyeing properties of a mate plant in the silk, wool, linen and cotton fabrics were investigated. Constituents of colorant of mate tea are chlorophyll and carotinoid; in addition, it has more minerals such as (Fe, Ca, Mn, Mg, Na, K, Zn, and Cu) than green tea. Mate tea colorants showed good affinity to silk and wool fabrics. It was found that the optimum condition for dyeing was 30 minutes for dyeing time, 7 for pH of dyebath, and at a dyeing temperature of $80^{\circ}C$. The maximum absorbance wavelength (${\lambda}_{max}$) of silk and wool fabrics dyed with mate tea were at 420-440nm; however, that of linen and cotton fabrics were at 400nm. K/S values of fabrics dyed under optimum conditions were 1.979 for silk fabrics, 1.541 for wool fabrics, 0.551 for linens and 0.465 for cotton fabrics. Munsell hue values of dyed fabrics measured 3.1Y-6.4GY for silk, 1.4Y-8.3Y for wool, 5.5Y-3.7GY for linen, and 5.3Y-1.3GY for cotton. All dyed fabrics showed hues in-between greenish yellow and greenyellow. Colorfastness to rubbing, perspiration and dry-cleaning of dyed fabrics with mate tea were very good; however, the grades of colorfastness to washing of dyed linen and cotton fabrics were poor, and colorfastness to light were poor.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.421-431
• /
• 2002

C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.598-605
• /
• 2001

The study that has been conducted is the consideration of the durability of dye, antibacterial activity, and deodorizing effects of cotton and silk textiles dyed with a botanical dying material that has been used in various ways over the years as Korean diet and folk remedies, the pomegranate. 1. The results of the K/S value of dying according to the types of mordants of textiles dyed with pomegranate extract the following have been discovered: The increase of K/S value of dying of the silk textiles appear to be higher than that of the cotton textiles. Next, silk textiles that have been treated with FeSO$_4$.7$H_2O$ appear to be at the highest. 2. The results of the color change measurement show a difference of color can be noticed according to the types of mordant. As opposed to those textiles that had been only scured textiles, all of the dyed textiles appeared to turn yellow. 3. Textiles that had been treated with $K_2$Cr$_2$O(sub)7 recorded the highest durability according to the colorfastness to light results. In the case of the cotton textiles colorfastness to washing, all appeared to show exceptional results of 3rd class or higher, excluding the textiles that had been treated FeSO$_4$.7$H_2O$. However silk textiles recorded relatively low classes of below 3rd to 4th class. For the colorfastness to washing of pollution, the results for both the cotton and silk textiles were excellent at class 4-5. The results of colorfastness to perspiration, colorfastness to rubbing, and colorfastness to dry cleaning showed comparatively exceptional results of 3rd to 4th class or higher when it came to dyed textiles. 4. According to the measurements of antibiosis, dyed textiles that had been treated with SnCl$_2$.2$H_2O$ appeared to show an exceptional bacterium decrease of approximately 70%. 5. According to the deodorizing measurements, dyed silk textiles appeared to have a higher deodorizing effect than cotton textiles. As for cotton textiles, those that had been treated with FeSO$_4$.7$H_2O$ and in the case of dyed silk textiles those that had been treated SnCl$_2$.2$H_2O$ recorded the highest deodorizing effect.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.533-544
• /
• 2006

The deposition of solids in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. In order to solve these problems and proper pipe management, estimation of solid loads from sewer and surface in a drainage basin is needed but this task is very difficult and extremely expensive. In this study, generalized procedures for estimating sewer solid loads during dry weather in combined sewer systems and for estimating solid loads on surface in a drainage basin developed by the U. S. Environmental Protection Agency were applied and analyzed in Gunja drainage basin in Korea. As result, the estimated solid loads from sewer and surface are 205.8,759kg/yr and 1,321,993kg/yr respectively, and total solid loads is 1,527,752kg/yr. The estimated solid removal from street cleaning, dredging from pipe system and pumping house is 1,486,636kg/yr. Therefore, the applied methods show resonable results. More reliable estimation can be achieved if long-term measurements and adjustment of estimation equations are carried out, and this estimation methods can be used usefully for the management of combined sewer system with reduction of cost and effort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.66.1-66.1
• /
• 2011

반도체를 비롯하여 LCD, OLED와 같은 디스플레이 (FPD: Flat Panel Display) 분야는 국가 선도 사업으로써 발전을 거듭해오고 있다. 하지만 기술의 성숙도가 높아짐에 따라 최근 중국과 대만 업체와의 경쟁이 심화되고 있으며, 더불어 환경문제가 큰 이슈로 떠오르고 있어 신기술 개발을 통한 생산 수율 향상 및 친환경 공정 개발의 중요성이 커지고 있다. 반도체, 디스플레이 공정에서 생산 수율 저하의 주요 원인으로써 공정 중 발생하는 미세 오염 입자를 들수 있다. 반도체 및 디스플레이 공정에서 세정 기술은 전체 기술의 30% 이상을 차지하며 생산 수율 및 제품의 품질에도 큰 영향을 주는 공정이다. 세정 공정은 일반적으로 습식 세정 공정이 낮은 공정비용을 바탕으로 널리 적용되어 왔으나, 기판의 대형화와 패턴의 미세화에 따라 정밀한 세정 스펙이 요구되며 더불어 막대한 양의 초순수와 화학액의 사용으로 인한 공정비용 증가와 환경 규제 강화에 따른 폐수 처리의 문제에 직면하고 있다. 이에 따라 폐수의 양을 줄이며 건조공정을 필요로 하지 않아 공정비용을 줄일 수 있는 건식 세정 공정에 대한 연구가 활발히 진행 되고 있다. $CO_2$ snow jet 세정 기술은 건식 공정으로써 $CO_2$ 가스를 특수하게 제작된 분사 노즐에서 고압으로 가스를 분사하여 이 때 발생되는 순간적인 감압에 의한 단열 팽창으로 생성된 $CO_2$ snow 입자가 기판 표면의 오염물과 물리적 충돌을 하어 세정이 이루어지는 기술이다. 특히 $CO_2$ 세정은 환경과 인체에 무해하며 공정 후 바로 승화하기 때문에 추가적인 폐수처리 공정 등이 필요하지 않고, 건식 공정으로써 수세(Rinse) 공정을 필요로 하지 않기 때문에, 공정비용을 크게 줄일 수 있으며 물반점 발생을 방지 할 수 있는 친환경 건식 공정으로써의 장점을 가지고 있다. 본 연구에서는 자체적으로 개발한 $CO_2$ snow jet을 바탕으로 하여 다양한 공정조건을 변화시켜 세정효율을 측정하는 한편, 최적화 하기 위한 연구를 진행하였으며 더불어 $CO_2$ snow의 세정력을 정량적으로 평가하기 위한 연구를 진행하였다. 실험을 통해 가장 효과적으로 $CO_2$ snow 입자를 배출 할 수 있는 공정 조건으로써 5 bar의 캐리어 가스 압력을 사용하여, 세정력에 가장 큰 영향을 줄 수 있는 분사 노즐과 기판 사이의 거리 및 분사 노즐의 각도 등을 변화시켜 각 조건에 따른 세정효율을 평가하였다. 세정 오염물은 Silica, PSL 표준 입자(Duke scientific, USA)를 정량적으로 웨이퍼에 오염 시킨 후, 파티클 스캐너(Surfscan 6500, KLA-Tencor, USA)를 이용하여 세정 전 후의 오염입자 개수 변화를 통해 정량적으로 세정효율을 평가하였다. 본 연구를 통하여 $CO_2$ snow jet를 이용한 친환경 고효율 건식 세정 공정 메커니즘을 분석하였으며, 노즐과 기판 사이의 간격 및 분사 노즐의 각도 등을 최적화 한 세정 공정을 얻을 수 있었다.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5107-5110
• /
• 2013

Background: Among women with haematuria, defining individuals under high risk for bladder cancer based on reproductive factors prior to cystoscopy would be of great benefit in the management of this condition. The aim of this study was to compare age and reproductive factors such as menopausal status, parity, age at first delivery and age at the last delivery between women who have haematuria with or without bladder cancer. Materials and Methods: A total of 463 patients underwent diagnostic cystoscopy in D$\ddot{u}$zce University Faculty of Medicine between 1 June 2008 and 1 June 2013. Female patients who presented with persistent microscopic or macroscopic haematuria and underwent standard evaluation for haematuria including urinalysis, urine culture, urine cytology, urinary tract imaging with excretory urography or computerized tomography with contrast enhancement and endoscopic evaluation of the urethra and bladder were included in this study. Exclusion criteria were tobacco use and high risk occupations for bladder cancer such as textile, dry cleaning, painting and etc. Forteen women had hematuria due to benign conditions, and 18 due to bladder cancer. Data were retrospectively retrieved from the medical records of Duzce University Hospital. Results: Patients with haematuria due to benign reasons did not significantly differ from patients who were found to have bladder cancer in terms of age (p=0.28), menopausal status (p=0.29), mean parity (p=0.38), being nulliparous (p=0.57), parity ${\geq}3$ (p=0.22), age ${\leq}18$ years at first delivery (p=1.00), age ${\geq}30$ years at last delivery (p=0.26), age ${\geq}35$ years at last delivery (p=0.23) and percentage of the patients with advanced age (${\geq}65$ years) (p=0.18). Conclusions: It is difficult to predict a high risk for developing bladder cancer in women with haematuria based solely on reproductive factors.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.661-673
• /
• 2007

Rock materials of the three-storied stone pagoda in the Cheongryongsa temple in Korea are mainly composed of gneissose two-mica granite and fine-grained granite. This stone pagoda shows structural instability due to cracks and breaking-out of the stones. The surface properties of the stone is highly degraded by various inorganic pollutants and epilithic biospecies. Therefore, this study carried out comprehensive deterioration diagnosis by non-destructive methods, and some conservation treatments base on the diagnosis were carried out to reduce weathering progress. As the treatments, the biospecies and lichen that covering on the stone surfaces were removed by dry and wet cleaning, and degraded concrete applied to the pagoda for restoration in the past was removed and repaired with epoxy resin. Oxidized iron plates inserted between the rock properties were also substituted titanium stainless steels. After all processes are completed, we sprayed consolidant on the rock surface. Finally, the ground of the stone pagoda was rearranged using small rock aggregates, and the fence was established for control of artificial deterioration by visitors and environmental maintenance.