Abstract
The deposition of solids in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. In order to solve these problems and proper pipe management, estimation of solid loads from sewer and surface in a drainage basin is needed but this task is very difficult and extremely expensive. In this study, generalized procedures for estimating sewer solid loads during dry weather in combined sewer systems and for estimating solid loads on surface in a drainage basin developed by the U. S. Environmental Protection Agency were applied and analyzed in Gunja drainage basin in Korea. As result, the estimated solid loads from sewer and surface are 205.8,759kg/yr and 1,321,993kg/yr respectively, and total solid loads is 1,527,752kg/yr. The estimated solid removal from street cleaning, dredging from pipe system and pumping house is 1,486,636kg/yr. Therefore, the applied methods show resonable results. More reliable estimation can be achieved if long-term measurements and adjustment of estimation equations are carried out, and this estimation methods can be used usefully for the management of combined sewer system with reduction of cost and effort.
합류식 관거 내 고형물의 퇴적으로 인해 통수능이 감소하여 여름철 장마시 국지적인 침수가 발생하며 이로 인해 관거 내 퇴적을 더욱 초래할 수가 있다. 이와 같은 문제를 해결하고 관거의 적절한 유지관리를 위해서는 배수유역에서의 하수 및 지표면으로부터의 고형물 부하량을 산정할 필요가 있으나 많은 비용과 노력이 수반되어야 한다. 따라서 본 연구에서는 미국환경보호청에서 제시한 건조기의 합류관거 내 고형물 퇴적 부하량 산정기법과 지표면에서의 고형물 부하량 산정기법을 우리나라 군자배수유역에 적용하여 분석하였다. 분석결과 하수로부터의 고형물 부하량은 205,759ka/yr이고 지표면으로부터의 고형물 부하량은 1,321,993kg/yr로 총 1,527,752kg/yr로 나타났다. 또한 수거량은 1,486,636kg/yr로 나타나 적절한 산정결과를 보여주었다. 배수유역에서 관거 및 지표면에서의 장기적인 관측이 이루어지고 이에 따라 국내설정에 맞도록 산정공식의 수정이 이루어지면 더욱 신뢰성 있는 산정을 할 수가 있으며 이를 통해 실무에서 많은 비용과 노력을 줄이고 합류식 관거 유지관리를 할 수가 있겠다.