• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.368-371
• /
• 2004

It analyzes the quality of the fine aggregate which is reproduced through a dry production process with cyclone and a wet production process. The conclusions of the study are as follows. 1. The recycled fine aggregate through the dry production process with cyclone shows the low rate of absorption and impurity content after the cyclone process. It shows that its density is 2.37, absorption rate is 4.8 and stability is $5.1\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade. 2. The recycled fine aggregate through the wet production process shows the low rate of absorption and foreign substance content after the process of wash and dehydration. It shows that its density is 2.40, absorption rate is 3.12 and stability is $3.2\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade.

• Journal of the FoodService Safety
• /
• v.3 no.1
• /
• pp.8-18
• /
• 2022

Dry-aging is one of the traditional aging processes, especially for beef. This aging process is being popular, because it produces unique brown/roasted flavor and texture that consumers prefer. However, as it is exposed to outside without packaging food safety concerns have been raised. The objective of this study was to investigate the presence of total aerobic bacteria (TAB) and pathogenic bacteria in manufacturing environment and suggest the safety management plan for the production of dry-aged meat. Surface samples from 66 environmental and 6 beef carcass samples were collected. According to the monitoring results, the contamination levels of TAB were in the order of shelves (5.4±1.1 Log CFU/cm²), cotton gloves (2.9±0.2 Log CFU/cm²), and door knobs (2.8±0.4 Log CFU/cm²) in the dry-aging room. In the door knobs, the level of mold was higher than that of yeast. These results indicate that the mold spores may be cross-contaminated with environmental factors inside the aging room. The risk factors that may occur during the manufacturing process were presented and possibility of risk was determined. From the aspect of microbiology, aging and trimming steps were determined as the critical control points. The temperature of the aging room should be maintained below 10℃ and the humidity below 75-85%. Based on the monitoring and the risk assessment of the dry-aging process, we prepared the safety management plan for the production of dry-aged meat, and it should be useful in improving the food safety of dry-aged meat.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.256-262
• /
• 2015

This study has an innovative improvement of the ocher tiles production system that aims to resolve social issue of industrial waste and to meet the customer needs for environmental-friendly building materials. By changing a wet type cutting method to a dry type of ocher tiles production system, the three processes such as cleaning, dehydration, and drying can be removed in existing overall process of 17 steps. Accordingly, the application of the wet type cutting method, which is proposed in this study, makes an increase in ocher tiles production from 1,500 to 1,850 pieces per hour. In particular, industrial wastewater that was emerging as the biggest problem in environmental pollutants in the wet cutting method has been removed. In addition, the most serious problems of noise and dust from the operator side, while developing a device for the dry cutting method, are eliminated through the development of additional equipment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.77-81
• /
• 1989

This experiment was conducted to elucidate the changes of dry matter production in permanent pasture and its relation with relative yield of the 1st cutting, regrowth capacity, and persistance of orchardgrass sward, based on the data of preceeding The results were summarized as follows; 1. Relationship between relative yield of the 1st cutting and regrowth capacity were changed by the times of established pasture. Thus, the relative yield of the 1st cutting have negative significant correlation (P < -0.001) with regrowth capacity. 2. Regrowth capacity(RC) was positively significant correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), plant size(PS) and distance between adjacent plants (DIS) of the 1st cutting. Also, regrowth capacity(RC) was positively correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), stubble diameter(DIA), stubble area(SB), plant size(PS) and distance between adjacent plants(D1S) of the 2nd cutting. 3. The coefficients of regression of the 1st cutting showed a tendency to slightly decrease, on the other hand, the 2nd cutting and total yield were tended to increase by the times of established pasture. 4, Between the regrowth capacity and persistency were may deeply concerned to the changes of dry matter production in permanent pasture. 5. The process of dry matter production in permanent pasture can be shown in following diagrams.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2020

Hydrogen production from biogas has received consistent attention due to the great potential to solve simultaneously the issues of energy demands and environmental problems. Practically, biomethane produced by purification/upgrading of biogas can be a good alternative to the natural gas which is a main reactant for a steam methane reforming process. Judging from the economic and environmental impacts, however, the steam biogas and dry reforming are considered to be more effective routes for hydrogen production because both processes do not require the carbon dioxide elimination step. Herein, we highlight recent studies of hydrogen production via reforming processes using biogas and effective applications for earlier commercialization.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.2
• /
• pp.199-204
• /
• 2009

For the purpose of developing a safe & hygienic manufacturing method to acquire low levels of benzo(a)pyrene in black and red ginseng products, this study investigated the effects of steam- and dry-processing temperatures on benzo(a)pyrene production in ginseng. By the red ginseng with a fix dry-process temperature of $50^{\circ}C$ and setting the steam-process temperature between $80{\sim}120^{\circ}C$, an extremely small amount(0.1 ppb) of benzo(a)pyrene was produced, indicating there was no relationship between the steam-temperature and benzo(a)pyrene production. On the other hand, when the red and black ginseng were steamed at the fixed temperature of $100^{\circ}C$ and dried at various temperatures between $50{\sim}120^{\circ}C$, the amount of benzo(a)pyrene produced was closely connected with the dry-temperature, and increased with higher drying temperatures. Upon repeating the steam and dry process nine times, in which the steam-temperature was set at $100^{\circ}C$ and the dry-temperature at $50^{\circ}C$, higher amount of benzo(a)pyrene were produced in red and black ginseng, respectively, with increasing steam- and dry-processing time. However, the level of benzo(a)pyrene still remained extremely small(below 0.12 ppb), showing a maximum amount in the black ginseng that was steamed and dried nine times. This suggests that the fine root of ginseng may be carbonized by increasing the number of times it is steam- and dry-processed. From the above results, this study determined that the optimum temperatures for manufacturing red and black ginseng products with safe levels of benzo(a)pyrene would be a temperature between 80 and $120^{\circ}C$ for steaming and a temperature less than $50^{\circ}C$ for drying.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.144-148
• /
• 1992

The purpose of this study is to develop a continuous process for sorbitol production using dried Zymomonas mobilis immobilized in K-carrageenan. The methods of glularaldehyde cross-linking of enzymes in CTAB (celyltrimetylammoniumbromide) treated cells immobilized in K-carrageenan showed stability for the production of sorbitol for 30 days of operation. K-carrageenan beads entrapping permeabilized cells were dried to Improve bead rigidity and storage stability. A semi-batch process with dry beads was carried out and only a small loss of enzyme activity (less than 8%) was observed during 72h. The value of Vmax for the dry K-carrageenan beads was found to be one half or that for free cells. It was shown that the productivities of the continuous process with wet K-carrageenan beads and dry beads at a dilution rate 0.1h-1 were 3.4g/L-h and 2.88h/L-h, respectively.

• Journal of Hydrogen and New Energy
• /
• v.16 no.2
• /
• pp.150-158
• /
• 2005

Added ratio of 8YSZ powder and organic compounds (solvent, plasticizer, dispersant, binder) properly. It manufactured electrolysis membrane by wet process that make slurry and dry process that do not use organic compounds. In the case of wet process, harmony combination and method of organic compound are an importance element in slurry manufacture. This slurry did calcine at temperature of 140$^{\circ}C$ in Furnace and manufactured electrolyte disk by Dry pressing method. Like this, manufacturing disk sintered at temperature of $1300^{\circ}C,\;1400^{\circ},\;1500^{\circ}C$ in Furnace and completed electrolysis membrane. Confirmed change of crystal structure and decision form through analysis of density, SEM, XRD according to change of sintering temperature, and considered relation with ion conductivity.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.415-423
• /
• 2006

As the shortage of natural & good quality aggregate for concrete, it is needed development of alternative aggregate. At the present time, the crushed sand is widely used among the alternation aggregate, and the usage of crushed sand will be increased more and more. Generally, crushed sud is produced with wet process in domestic, but some manufacturing companies which are handicapped with local restrict are produced by dry process. In this study, analyzing the facilities of dry crushed sand, the quality properties of dry crushed sand was done by Korean Industrial Standards. Based on the quality results of dry crushed sand, the experiment of concrete with the dry crushed sand which is substitute for sea sand was done. As the results of basic qualities, the amount of 0.08 mm sieve passing ratio was over KS criteria, and the fineness modulus was higher than sea sand, and the other physical properties of dry crushed sand was similar to sea sand. The results of concrete experiment, according to the substitutive ratio of dry crushed sand is increased, the slump and air content of concrete was decreased by increase of fine particles of dry crushed sand, and the unit weight content, compressive & tensile strength of concrete were increased on the contrary. The physical properties of concrete used dry crushed sand were showed same tendency without relation to W/B. Consequently, if the fine particle contents of dry crushed sand was lower, it is judged that dry crushed sand is no problem to use for concrete aggregate and the amount of usage will be increased.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.8
• /
• pp.1251-1258
• /
• 2010

During the nitrogen-fixing process, ammonia ($NH_3$) is incorporated into glutamate to yield glutamine and is generally not secreted. However, in this study, $NH_3$-excreting strains of nitrogen-fixing Paenibacillus were isolated from soil. The ammonium production by the Paenibacillus strains was assayed in different experiments (dry biomass, wet biomass, cell-free extract, and cell-free extract adsorbed on nano $TiO_2$ particles) inside an innovative bioreactor containing capsules of $N_2$ and $H_2$. In addition, the effects of different $N_2$ and $H_2$ treatments on the formation of $NH_3$ were assayed. The results showed that the dry biomass of the strains produced the most $NH_3$. The dry biomass of the Paenibacillus strain E produced the most $NH_3$ at 1.50, 0.34, and 0.27 ${\mu}M$ $NH_3$/mg biomass/h in the presence of $N_2$ + $H_2$, $N_2$, and $H_2$, respectively, indicating that a combined effluent of $N_2$ and $H_2$ was vital for $NH_3$ production. Notwithstanding, a cell-free extract (CFE) adsorbed on nano $TiO_2$ particles produced the most $NH_3$ and preserved the enzyme activities for a longer period of time, where the $NH_3$ production was 2.45 ${\mu}M$/mg CFE/h over 17 h. Therefore, the present study provides a new, simple, and inexpensive method of $NH_3$ production.