Browse > Article
http://dx.doi.org/10.4334/JKCI.2006.18.3.415

The Quality of Crushed Sand by Dry Production Process and Its Influence on Properties of Concrete  

Park, Cho-Bum (Research & Development Division, Eugene Corporation Co. Ltd.)
Baek, Chul-Woo (Research & Development Division, Eugene Corporation Co. Ltd.)
Kim, Ho-Su (Research & Development Division, Eugene Corporation Co. Ltd.)
Ryu, Deuk-Hyun (Research & Development Division, Eugene Corporation Co. Ltd.)
Publication Information
Journal of the Korea Concrete Institute / v.18, no.3, 2006 , pp. 415-423 More about this Journal
Abstract
As the shortage of natural & good quality aggregate for concrete, it is needed development of alternative aggregate. At the present time, the crushed sand is widely used among the alternation aggregate, and the usage of crushed sand will be increased more and more. Generally, crushed sud is produced with wet process in domestic, but some manufacturing companies which are handicapped with local restrict are produced by dry process. In this study, analyzing the facilities of dry crushed sand, the quality properties of dry crushed sand was done by Korean Industrial Standards. Based on the quality results of dry crushed sand, the experiment of concrete with the dry crushed sand which is substitute for sea sand was done. As the results of basic qualities, the amount of 0.08 mm sieve passing ratio was over KS criteria, and the fineness modulus was higher than sea sand, and the other physical properties of dry crushed sand was similar to sea sand. The results of concrete experiment, according to the substitutive ratio of dry crushed sand is increased, the slump and air content of concrete was decreased by increase of fine particles of dry crushed sand, and the unit weight content, compressive & tensile strength of concrete were increased on the contrary. The physical properties of concrete used dry crushed sand were showed same tendency without relation to W/B. Consequently, if the fine particle contents of dry crushed sand was lower, it is judged that dry crushed sand is no problem to use for concrete aggregate and the amount of usage will be increased.
Keywords
dry production process; crushed sand; fine particles; 0.08 mm sieve passing ratio;
Citations & Related Records
연도 인용수 순위
  • Reference
1 건설교통부, 연도별 골재원별 골재 채취허가 및 채취실적 통계자료, http://www.moct.go.kr. 2005
2 건설교통부, 한국건설교통기술평가원, 대체골재를 사용한 콘크리트의 고품질화 기술 개발, 2003 건설기술기반 구축사업 제 1차년도 연차보고서, 03기반기술 A03, 한국 건설기술연구원, 2004, pp.42-45, 67
3 이성복, '잔입자 함유량 및 잔골재 입형 변화에 따른 부순모래 콘크리트의 특성에 관한 연구', 한양대학교 대학원 박사학위논문, 1997, pp.15-16
4 A. M. Neville, Properties of Concrete, Fourth and Final Edition, Longman, London, 1996, pp.308-311
5 유승업 외, '부순 잔골재의 미립분량이 콘크리트의 품질에 미치는 영향', 대한 건축학회 창립 60주년기념 학술발표대회논문집, 제25권, 제1호, 2005. 10, pp.313-316
6 전성태, '미립분 함유량에 따른 부순모래 콘크리트의 물성에 관한 실험적 연구', 대구대학교 대학원 석사학위논문, 1999, pp.58-59