• 펄프종이기술
• /
• 제36권3호
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.23-29
• /
• 1999

The effect of dilute sulfuric acid treatment was examined to improve recyclability of coated brokes. Turbidity , electric conductivity , and cationic demand of the white water from coated broke prepared from an alkaline base paper was determined. Sulfuric acid treatment was found to be effective in dissolving undisintegrated substances such as binders, pigments, and fibers. The properties of papers prepared by adding the broke to pulp stock up to 30% dry weight were examined . With the increase of broke addition, retention, sizing degree and smoothness were improved ; on the other hand, formation uniformness, air permeability and internal bonding strength were decreased. The extent of improvement by broke addition was greater for the surfuric acid-treated broke than the control broke. It was concluded that the use of coated broke should be limited within 10-15% weight of the product for either type of broke.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.16-23
• /
• 2006

• 펄프종이기술
• /
• 제39권3호
• /
• pp.36-40
• /
• 2007

It has been problematic to repulp the dry broke treated with permanent wet strength agents like PAE, UF and MF. Solution type GPAM has the benefit of easy repulping but it has problems of cocross-linking and tends to gel. Therefore, the product concentration must be lower than 10% to reduce the gel generation problem. We developed emulsion type GPAM by an inverse emulsion technology to resolve both the repulping problem with permanent wet strength agents and the stability problem of GPAM solution products.

• Journal of Ginseng Research
• /
• 제3권2호
• /
• pp.105-112
• /
• 1979

Effect of gibberllin on the breaking of bud dormancy of root and growth of aerial parts were investigated under laboratory and field condition for the prolongation of shoot growth duration, shortening of fruit bearing age and the increase of root yield. Drop application of GA (0.5ml of 50ppm) on rhizome of one year old root broke bud dormancy better than by low temperature. Soaking for one hour of one year old roots which wintered in the field in GA (50-200ppm) greatly accelerated the emergence of new buds while kinetin was only effective at low level (50ppm). GA substantially increased stem length in early stage and petiole length later on while kinetin increased stem diameter. Under the field condition with polythylene film tunnel (PET) in early spring the soaking in GA (50ppm for 1 hour) of rhizome of 4 year old root with replanting and dropping GA (50ppm, 1ml) on rhizome without replanting brought earlier emergence (29days) in comparison with that in the usual field. PET alone caused 14 day-early emergence. GA increased the length of stem and petiole only in early stage and replanting decreased only petiole length in later stage. Soaking in GA with replanting caused the Pronounced decrease in peduncle length, percentage of (ruin set and dry weight of reproductive organ (fruits and peduncle). Dropping without replanting showed significant decrease only in dry weight of reproductive organ. Fruit maturing was 20 days earlier than in usual held with little difference between GA and PET. It is well expected that GA could be used for early emergence of bud, shortening of root dormancy period, thinning of fruit and higher root yield according to application amount and methods.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.498-504
• /
• 2011

The purpose of this study was to investigate and develop an eco-frendly wood adhesive based on vegetable oil (especially soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The waste soybean oil (WSBO) was reacted with $O_3$ at the rate of $450m{\ell}$(acetone) : $50m{\ell}$ (WSBO) for different times, 1, 2, 3 hrs. The investigation of the modified chemical strecture of the ozonied WSBOs were conducted using FT-IR. As ozonification time increased, the peak of the unsaturated double bonds was disappeared especially ozonized-3hrs and aldehyde or carboxyl peak appeared because ozonification broke the oil into small molecules. The plywood were made at $150^{\circ}C$ with 4 minutes hot-press time using the different ozonized 3 hrs WSBO/pMDI adhesives and were tested for the dry, wet, cyclic boil test according to the Korea Industrial Standard F3101 Ordinary plywood. The bond strengths gradually increased until 1 : 0.5~1 : 3, but it decreased 1 : 4, as the contents of pMDI increased. The results of the dry, wet and cyclic bond strengths the equivalent ratio was formed approximately between 1 : 2~1 : 3. And the 1 : 1~1 : 4 strengths met constantly the standard requirement of 7.0kgf/$cm^2$ (KS F3101). From the comprehensive view on the results of above experiment, it could be confirmed that ozonized WSBO/pMDI has characteristics of effective reactivity and wet stability showed as an excellent candidate of wood adhesive applications.

• 한국농공학회지
• /
• 제9권2호
• /
• pp.1296-1300
• /
• 1967

This study was made through the utilization of heavy soil taken from the experimental plot of heavy soil in Konkuk University, Changan-dong, Sungdong-ku, Seoul. The soil used in the experiment has the following physical characteristics: 1. The soil is very compact, impervious, and unfit for any plant growth, 2. For improvement of the soil, tile drainage practice has been employed, 3. According to the general theory of tile drainage, it is unnatural that the effect of drainage is actually observed in such a soil. The followings are the results of the experiment: 1. Water moved to crosswise when the plotted soil profile was not broke. In this case the upper sloped part was dry while the bottom part was moistned. The upper part of the tile was also moistned. 2. The crosswise movement of water was not observed in the artificially broken plot of subsoil. However, the water flow from the tile was observed for long period as a result of the increase of soil void, seepage, aeration, and water holding capacity. However, the water flow from the tile in the plot of unbroken subsoil was observed only in short period and soon the flow was stopped. 3. the distance between the tile laid in the heavy soil should not exceed 10m for the efficient drainage. 4. When the pF is 2.5 in the subsoil the moisture content was between 23.97% and 28.20%. However, when the water saturated in the subsoil the moisture content was between 34.30% and 22.10%. Accordingly without the higher pF than 2.5 the water can not be absorbed and therefore the drainage can not be occured.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.60-63
• /
• 2011

We investigated the etching characteristics of zinc oxide (ZnO) and the effect of additive gases in a $Cl_2$-based inductively coupled plasma. The inert gases were argon, nitrogen, and helium. The maximum etch rates were 44.3, 39.9, and 37.9 nm/min for $Cl_2$(75%)/Ar(25%), $Cl_2$(50%)/$N_2$(50%), and $Cl_2$(75%)/He(25%) gas mixtures, 600 W radiofrequency power, 150 W bias power, and 2 Pa process pressure. We obtained the maximum etch rate by a combination of chemical reaction and physical bombardment. A volatile compound of Zn-Cl. achieved the chemical reaction on the surface of the ZnO thin films. The physical etching was performed by inert gas ion bombardment that broke the Zn-O bonds. The highly oriented (002) peak was determined on samples, and the (013) peak of $Zn_2SiO_4$ was observed in the ZnO thin film sample based on x-ray diffraction spectroscopy patterns. In addition, the sample of $Cl_2$/He chemistry showed a high full-width at half-maximum value. The root-mean-square roughness of ZnO thin films decreased to 1.33 nm from 5.88 nm at $Cl_2$(50%)/$N_2$(50%) plasma chemistry.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.56-64
• /
• 2009

본 연구의 목적은 콩기름을 오존 산화 처리하여 기능기를 도입하고 이를 바탕으로 친환경 목재 접착제를 개발하는 것이다. 시판용 콩기름을 시간당 약 7.13 g의 오존을 발생시켜 15분, 30분, 60분, 120분간 오존산화 처리한 후 FT-IR, $^1H$-NMR, MALDI-TOF MS, GC/MS 측정하여 구조변화를 분석하였다. 기기분석 결과 오존산화처리에 의하여 콩기름의 불포화 이중결합이 개열되어 카르복실기 또는 알데하이드기가 생성됨을 확인하였다. 오존산화콩기름 변성 pMDI 접착제의 접착력은 오존처리 정도와 pMDI의 혼합비율에 따라 달라지며, KS F 3101 보통합판기준 내수 접착강도를 안정적으로 만족 시키는 조건은 오존산화 처리시간 30분~60분, pMDI와 1:1로 혼합한 경우이며, 준내수 접착강도를 만족시키는 범위는 오존산화 처리시간 30분~60분, pMDI의 혼합비 0.5이상, 상태접착강도를 만족시키는 범위는 오존산화 처리시간 15분~60분, pMDI의 혼합비 0.25 이상임을 알 수 있었다. 위의 실험결과를 종합하여 볼 때, 오존산화 처리한 식용유는 오존처리시간 및 pMDI의 혼합비율을 조절하면 상태접착력 뿐만 아니라 내수접착력이 요구되는 목질복합재료 제조용 접착제 제조가 가능함을 확인할 수 있었다.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.8-21
• /
• 2011

본 연구는 역사기록서 분석을 통해 조선시대 518년 동안 산불발생 및 특성에 관한 기록을 고찰하였다. 본 연구에 활용된 역사기록서는 조선왕조실록, 승정원일기, 국역비변사 등록, 각부청의서존안, 철종행장 등으로 조선시대 왕조별로 산불이 기록된 문헌을 조사, 분석하였다. 역사기록문헌에서 기록된 산불 내용은 발생 개요, 산불 종류, 산불피해 등에 관한 사항과 함께 송전(松田)의 산불예방 조치사항 등이 포함되어 있다. 조선시대 역사기록서를 분석한 결과, 산불발생건수가 많았던 왕조는 현종(14건)과 순조(13건)로 강풍으로 인한 산불피해가 극심한 것으로 기록되었고 최대 산불피해는 순조 4년(1804)에 발생한 강원도 동해안 산불로 사망자 61명, 민가 2,600호가 소실되었다. 또한 최대 인명피해가 발생한 산불은 현종 13년(1672) 강원도 동해안 산불로 65명이 사망하였다. 조선시대 산불 발생 원인은 원인미상(42건)>실화(10건)>방화, 낙뢰(3건)>수렵입화(2건)>어린이 불장난, 논밭두렁소각, 가옥화재(각 1건)로 나타났으며 지역별 산불발생은 동해안 지역이 39건(56 %)으로 가장 많이 발생한 것으로 나타났다. 계절별 산불발생은 봄철기간 산불이 46건(73 %)으로 가장 많은 것으로 나타났으며 연중 산불이 가장 많이 발생한 기간은 4~5월로 현재의 산불위험시기와 유사하다. 산불관련자에 대한 처벌의 경우, 방화자 및 실화자에 대해서는 유배, 관직박탈, 효시 등의 처벌기록과 관리지역 책임자에 대한 문책이 기록되어 있다. 결론적으로 조선시대의 경우에도 산불 위험성과 심각성에 대해 여러 문헌에서 기록되어 있는 것을 알 수 있고 현재 우리나라 산불발생 기간 및 지역 패턴과 유사한 것으로 나타났다.