• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.291-297
• /
• 2004

Water-soluble chitosan micro spheres were prepared by emulsification of chitosan solution in mineral oil followed by cross linking reaction with different amount of the cross linking agent (glutraraldehyde), different chitosan concentration. Then, the physicochemical properties such as morphological change by degradation, drug loading efficiency, and drug release profiles were investigated with the drug loaded water-soluble chitosan microspheres. Norfloxacin loaded water-soluble chitosan micro spheres showed excellent drug entrapping capacities without burst release caused by surface bound drug. The absence of the surface bound drug also confirmed by X-ray diffraction study. Degradation and drug release studies showed that the amount of the crosslinking agent played a crucial role for drug loading, release and degradation. The water-soluble chitosan micro spheres showed more sustained drug release profiles with slower degradation and larger particle size by increasing crosslinking agent.

• YAKHAK HOEJI
• /
• v.35 no.3
• /
• pp.197-202
• /
• 1991

In order to study drug release from the suppository, three types of hollow suppositories and one conventional suppository were prepared using indomethacin(IDM) as a model drug and Witepsol H-15 as a base. The 4 types of suppository prepared are as follows: type I, conventional suppository containing 50 mg of IDM powder, type II, hollow supository containing 50 mg of IDM powder in the cavity, type III, hollow suppository containing 25 mg of IDM powder in the base and IDM microcapsules (25 mg as IDM powder) in the cavity, and type IV, hollow suppository containing IDM microcapsules (25 mg as IDM powder) in the base and 0.5 ml of 5%(w/v) IDM-PEG 300 solution in the cavity. The drug amount released(%) from type II and I within 24 hrs was 46.7% and 66.9%, respectively. Comparing with the drug amount released from four types of suppository within initial 2 hrs and 24 hrs, that of type IV was high as 32.7% and 76.6%, respectively. IDM-ethycellulose microcapsules passed through 270 mesh sieve and the IDM content was 20.95%.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.313-321
• /
• 1997

Ion exchange resin complexes of famotidine have been prepared by the reaction of famotidine solution with activated ion exchange resins. Complex formation efficiency between famotidine and ion exchange resin was about $80{\sim}90%$ in average, calculated by HPLC determination. Drug release characteristics from the resin complexes were evaluated by the modified percolation method. Famotidine release was dependent on the type of ion exchange resins. In the case of weakly acidic resin complexes, the cumulative released amount of famotidine was more than 90% for 1hr in pH 1.2 buffer solution. However, in the case of strongly acidic resin complexes, it was less than 5% for 3hr in the same medium. Strongly acidic resins revealed some advantages over weakly, acidic resins for overcoming instability of famotidine in gastric juice. In addition, strongly acidic resin complexes showed controlled release of famotidine in pH 6.8 buffer solution, showing the result of about 60 to 70% of drug release for 5hr. After oral administrations of famotidine-resin complexes to rats as dose of 40 mg equivalent/kg, the pharmacokinetic parameters of famotidine were obtained by model independent analysis and compared with those of famotidine solution or suspension. $C_{max}$ of famotidine-resin complex was lower than that of famotidine solution or suspension. MRT, MAT, and MDT of the complexes were greater than those of famotidine solution or suspension. From these results, it was expected that famotidine was released slowly from the complexes and absorbed continuously into systemic circulation. It was recognized that drug release from the complexes was the rate-limiting step in drug absorption, since there were close correlations between in vitro drug release and in vivo pharmacokinetic parameters.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.155-165
• /
• 1994

Some mucoadhesive polymers such as hydroxypropylcelluose (HPC) and carbopol-934 (CP) have been employed for the preparation of mucoadhesive polymeric systems, and their physical properties including mucoadhesion, swelling, and drug release were evaluated. A new simple experimental technique that can quantitatively measure the bioadhesive properties of various polymeric systems has been developed by the methods of detachment force test. As the polymeric systems, the discs of freeze-dried HPC/CP solid dispersions were prepared. The mucosa used in these tests were upper, middle, and lower parts of small intestine of male rats weighing $300{\sim}350\;g$. Detachment forces were increased as the mole fraction of CP increased in discs of HPC/CP solid dispersions. In the points of intestinal site dependence of mucoadhesion, the solid dispersions revealed non-specific mucoadhesion to the intestine. Swelling and drug release characteristics of mucoadhesive polymeric systems were studied extensively to find out the feasibility for the oral controlled delivery systems. Swelling ratio, expressed as the final height/initial height, has been determined in various pH buffer solutions. Hydrochlorothiazide (HCT) was employed as a model drug for release study. Apparent swelling and drug release rate constants, $K_s$ and $K_r$ respectively, were obtained from the square-root time plot of either swelling ratio or released amount of drug, particularly for the time periods before reaching the equilibrium. As a result, the swelling ratio of HPC/CP solid dispersions was increased as the weight percentage of CP increased. Similarly, the release of HCT from the solid dispersions was dependent on pH changes and CP contents, resulted in the slower release of HCT with the increases of pH and CP contents.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.1
• /
• pp.19-26
• /
• 1993

The purpose of this paper is to explore the possible applicability of alginate beads as an oral controlled release system of polymeric drugs. Cellulase was used as a model polymeric drug. The release of cellulase from alginate beads was moderately affected by the ratio of cellulase to sodium alginate and strongly affected by $CaCl_2$ concentration. However, the release was not particularly affected by the other factors such as sodium alginate concentration and curing time. The drug was not released from alginate beads at pH 1.2, but was released continuously up to 8 hr at pH 6.8. At pH 6.8, the beads were swollen highly up to 3 hr, thereafter, were eroded into the bulk solution up to 6 hr, completely. Drug release from the beads can be caused due to diffusion and erosion of the matrix. Activity of cellulase was reduced when alginate beads containing cellulase were stored in simulated gastric juice. Further investigation would be necessary to improve the acid resistance of the beads. Since the release of cellulase as a model polymeric drug could be controlled by the regulation of the preparation conditions of alginate beads, the alginate beads may be used for a potential oral controlled release system of such polymeric drugs as polypeptide drugs.

• Archives of Pharmacal Research
• /
• v.29 no.12
• /
• pp.1179-1186
• /
• 2006

Cross-linked starch microspheres were prepared using different kinds of cross-linking agents. The influence of several parameters on morphology, size, swelling ratio and drug release rate from these microspheres were evaluated. These parameters included cross-linker type, concentration and the duration of cross-linking reaction. Microspheres cross-linked with glutaraldehyde had smooth surface compared with those prepared with epichlorhydrine or formaldehyde. The particle size increased with increasing the cross-linking time and increasing the drug loading. Swelling ratio of the particles was a function of cross-linker type but not the concentration or time of cross-linking. Drug release from starch microspheres was measured in phosphate buffer and also in phosphate buffer containing a-amylase. Results showed that microspheres cross-linked with epichlorhydrine released all their drug content in the first 30 minutes. However, cross-linking of the starch microspheres with glutaraldehyde or formaldehyde decreased drug release rate. SEM and drug release studies showed that cross-linked starch microspheres were susceptible to the enzymatic degradation under the influence of alpha-amylase. Changing the enzyme concentration from 5000 to 10,000 IU/L, increased drug release rate but higher concentration of enzyme (20,000 IU/L) caused no more acceleration.

• Journal of Sensor Science and Technology
• /
• v.13 no.1
• /
• pp.47-55
• /
• 2004

This paper presents drug release properties of active drug delivery system (DDS) using volume change of polypyrrole (PPy). The incorporation of various chemical substances into the PPy and controlling its release with the externally applied voltage to the PPy are possible. In order to confirm possibility for drug delivery system qualitatively, indicator(phenol red) was examined as a dopant of PPy. The applied voltage to the PPy electrode was set to -2 V and this negative voltage makes the anionic indicator released in saline solution. After qualitative analysis, in order to confirm quantitative drug release characteristic of PPy, salicylate which is one of the aspirin substance was used as a dopant of PPy. As a result, the salicylate release characteristics with time was thoroughly investigated while varying the electrode area, polymerization time, the applied voltage for drug release. Based on these quantitative results, a preliminary experiment was carried out to check the feasibility of the PPy applicable to the neuronal system.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.201-205
• /
• 1999

Hydroxypropylmethylcelluloses (HPMC) are cellulose ethers which may be used as the basis for hydrophilic matrices for controlled release oral delivery and offer the advantages of being non-toxic and relatively inexpensive. In this work, we designed new drug release system using HPMC as matrix, manufactured by direct compression technology and have investigated the effects of the controlling factors on drug release from a swellable hydrophillic delivery system. It was found that the release rate of the drug decreased with increasing the polymer molecular weight and the polymer content in tablets, and was independent of compaction pressure and pH of dissolution fluids. Especially, the ability of the anionic surfactant, sodium laurylsulfate, to retard the release of pseudoephedrine hydrochloride from HPMC was characterised. With increasing the concentration of the sodium laurylsulfate within the matrix, drug release rate decreased. It is believed that, provided the pseudoephedrine hydrochloride and the sodium laurylsulfate are oppositely charged, they will bind together in situ within the HPMC matrix, leading to reduced drug release rates.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.1
• /
• pp.51-57
• /
• 1998

Tetracycline lyogel ointment consisting of hydroxy ethyl cellulose(HEC) in glycerin and Eudragit RS 100 in triacetin were prepared and then release characteristic were investigated. The physical properties of lyogel ointment such as viscosity, particle size and microscopic structures were also evaluated. The microscopic structures showed that lyogel particles containing drug were dispersed in the triactin solution. The release rate of drug from lyogel ointment as a function of HEC was not changed. However the release rate was significantly decresed when the amount of Eudragit RS 100 and triacetin in lyogel ointment was increased. The viscosity and weight fraction in external phase of lyogel ointment influenced the release rate. The current studies suggest that the release rate of drug can be controlled by changing of lyogel ointment compositions.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.161-164
• /
• 2003

Oral drug delivery system using pectin gel was developed for colon-targeting of peptide drug. BSA(bovine serum albumin)-loaded pectin and pectin-alginate beads were prepared for drug release properties in vitro. Morphological studies by electron microscopy indicated that pectin and pectin-alginate beads were spherical in shape and approximately 1.0 mm. In order to find the suitable beads, effects of cross-linking agents (calcium chloride or zinc acetate) and drying temperature of beads were investigated. Drug release decreased with concentration of cross-linking agents and drying temperature. For colonic drug delivery from pectin and pectin-alginate beads, pectin degradable enzymes were added at 5 hrs from the beginning of drug release. After addition of enzymes, drug release was suddenly increased against free enzymes. Therefore, pectin and pectin-alginate beads can be promised as useful drug release carriers for colon-targeted delivery.