• Carbon letters
• /
• v.27
• /
• pp.18-25
• /
• 2018

In this study, graphene oxide(GO) was used as drug carriers to amorphize poorly watersoluble drugs via a co-spray drying process. Two poorly water-soluble drugs, fenofibrate and ibuprofen, were investigated. It was found that the drug molecules could be in the graphene nanosheets in amorphous or nano crystalline forms and thus have a significantly enhanced dissolution rate compared with the counterpart crystalline form. In addition, the dissolution of the amorphous drug enwrapped with the graphene oxide was higher than that of the amorphous drug in activated carbon (AC) even though the AC possessed a larger specific surface area than that of the graphene oxide. The amorphous formulations also remained stable under accelerated storage conditions ($40^{\circ}C$ and 75% relative humidity) for a study period of 14 months. Therefore, graphene oxide could be a potential drug carrier and amorphization agent for poorly water-soluble drugs to enhance their bioavailability.

• Archives of Pharmacal Research
• /
• v.28 no.6
• /
• pp.736-742
• /
• 2005

Xyloglucan (XG), which exhibits thermal sol to gel transition, non-toxicity, and low gelation concentration, is of interest in the development of sustained release carriers for drug delivery. Drug-loaded XG beads were prepared by extruding dropwise a dispersion of indomethacin in aqueous XG solution (2 wt.-$\%$) through a syringe into corn oil. Enteric coating of XG bead was performed using Eudragit L 100 to improve the stability of XG bead in gastrointestinal (GI) track and to achieve gastroresistant drug release. Release behavior of indomethacin from XG beads in vitro was investigated as a function of loading content of drug, pH of release medium, and concentration of coating agent. Adhesive force of XG was also measured using the tensile test. Uniform-sized spherical beads with particle diameters ranging from 692 $\pm$ 30 to 819 $\pm$ 50 $\mu$m were obtained. The effect of drug content on the release of indomethacin from XG beads depended on the medium pH. Release of indomethacin from XG beads was retarded by coating with Eudragit and increased rapidly with the change in medium pH from 1.2 to 7.4. Adhesive force of XG was stronger than that of Carbopol 943 P, a well-known commercial mucoadhesive polymer, in wet state. Results indicate the enteric-coated XG beads may be suitable as a carrier for oral drug delivery of irritant drug in the stomach.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.161-164
• /
• 2003

Oral drug delivery system using pectin gel was developed for colon-targeting of peptide drug. BSA(bovine serum albumin)-loaded pectin and pectin-alginate beads were prepared for drug release properties in vitro. Morphological studies by electron microscopy indicated that pectin and pectin-alginate beads were spherical in shape and approximately 1.0 mm. In order to find the suitable beads, effects of cross-linking agents (calcium chloride or zinc acetate) and drying temperature of beads were investigated. Drug release decreased with concentration of cross-linking agents and drying temperature. For colonic drug delivery from pectin and pectin-alginate beads, pectin degradable enzymes were added at 5 hrs from the beginning of drug release. After addition of enzymes, drug release was suddenly increased against free enzymes. Therefore, pectin and pectin-alginate beads can be promised as useful drug release carriers for colon-targeted delivery.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2010

New biological treatments were being developed at a record place, but their potential could be compromised by a significant obstacle: the delivery of these drugs into a body. Pharmaceutical delivery is now nearly as important as product. New systems are being developed, and Drug Delivery Markets Series cover these new systems. Transdermal Delivery System(TDS) is often used as a method of drug dosage into the epidermic skin. An approach used to delivery drugs through the skin for therapeutic use as an alternative to oral, intravascular, subcutaneous and transmucosal routes. Various transdermal drug delivery technologies are described including the use of suitable formulations, carriers and penetration enhancers. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other methods of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stopped if the drug dosage lead to side effect. Polysaccharides, such as karaya gum and glucomannan, were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, drug contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in fibric acid(ciprofibrate) such as lipophilic drug in vitro. We used glycerin, PEG400 and PEG800 as enhancers. Since dermis has more water content(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when PEG400 was more effective for lipophilic drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. Especially, this result suggests a possible use of polysaccharide gel ointment matrix as a transdermal delivery system of anti-hyperlipoproteinemic agent.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.516-521
• /
• 2005

Drug delivery to the lymphatic system may be important in terms of the treatment with lymphatic involvement, such as tumor metastases and immunization. Especially, drug transport via the intestinal lymphatics after oral administration has been attracted lots of interests. The purpose of this study was to prepare cyclosporin A (CSA)-loaded liposomes, with different characteristics, and evaluate their mucoadhesivity. Three liposome preparations were formulated: cationic stearylamine liposomes (SA-Lip), anionic phosphatidylserine liposomes (PS-Lip), Polymer (chitosan)-coated liposomes (CS-Lip), and characterized. The liposome preparations were found to be spherical in shape, with PS-Lip being the smallest. The liposome preparations exhibited entrapment efficiencies in the order: PS-Lip $(52.5{\pm}2.9%)$ > SA-Lip $(48.8{\pm}3.3%)$ > CS-Lip $(41.7{\pm}4.2%)$. Finally, mucoadhesive tests were carried out using rat intestine, with SA-Lip (67%) showing the best adhesive rate of the three preparations (PS-Lip: 56%, CS-Lip: 61%). These results suggest that a positive charge on the surface of drug carriers may be an important factor for the intestinal drug delivery.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.382-386
• /
• 2003

Reductive amination of N-succinyl-chitosan (1) and lactose using sodium cyanoborohydride in 1/15 M phosphate buffer (pH 6.0) for 6 d was suitable for the preparation of lactosaminated N-succinyl-chitosan (2). At 8, 24 and 48 h after i.v. administration of fluorescently labeled 1 (1') or 2 (2'), Peyer's patch, mesenteric lymph nodes, testes, prostate, preputial grand, intestine (small intestine plus cecum), femoral muscle, backbone and peritoneum were taken. Peyer's patch and mesenteric lymph nodes were put together as lymph nodes. Over 10% of dose/g tissue was distributed to the prostate and lymph nodes at 48 h post-administration in both l' and 2'.2' was easily distributed into not only the liver but also prostate, intestine, preputial gland and lymph nodes. Although galactose receptors are known to exist not only on the liver parenchymal cells but also on prostate and testes, the selective distribution of 2' into the prostate and the testes were not observed clearly. This study suggested that 1 and 2 should have possibilities for both the prevention and cure of lymph node metastasis as drug carriers.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.515-519
• /
• 2009

Biodegradable poly((R)-3-hydroxy butyrate) and poly(ethylene glycol) was conjugated to make amphiphilic di-block copolymer. Folate was conjugated at di-block copolymer to target the cancer cells. Copolymer was ready to form the self-assembled micelle whose size was 125~156 nm in aqueous solution. Griseofulvin as a hydrophobic drug was loaded in nanoparticles. Their loading efficiencies were 35~56%. Hydrophobic drug was continuously released for 24 h. Cell viability test showed that folate attached particles were 10% more efficient than the particles without targeting ligands.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.163-169
• /
• 2008

Liposomes are spherical vesicles composed of lipid bilayer membranes. However, the conventional liposomes have been found to be plagued by rapid opsonization and taken up by the reticuloendothelial system (RES), resulting in shortened circulation time and limited intracellular uptake to target cell. In this study, polyethyleneglycol-cationic liposomes (PCL) containing cationic lipid and DSPE-mPEG were prepared by thin film cast-hydration method. The PEG liposomes had approximately $97.0{\pm}1.3\;nm$ of mean particle diameter and $-21.7{\pm}1.2\;mV$ of zeta potential value. PCL had $96.4{\pm}1.8\;nm$ of mean particle diameter and $-8.7{\pm}1.1\;mV$ of zeta potential value with a decrease of about 10 mV compared to the PEG liposomes. Loading of model drug, doxorubicin (DOX), in liposomes were carried out by using remote loading method and the loading efficiency of DOX in liposomes was about $95.0{\pm}1.9%$. Intracellular uptake and cytotoxicity of PCL were higher than that of PEG liposomes to murine B16F10 melanoma cells. In addition, anti-tumor activity of PCL was similar to that of PEG liposomes on growth of A549 human lung carcinoma in BALB/c mice. Consequently, PCL modified with cationic lipid may be applicable as anticancer drug carriers that can increase intracellular uptake and therapeutic efficacy.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

• Polymer Science and Technology
• /
• v.24 no.4
• /
• pp.347-351
• /
• 2013