• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.37-40
• /
• 2000

This study was carried out to investigate dropping shock of household electric appliances during materials handling. Microwave oven($18{\ell}$), TV(16") and washing machine(6.2kg) were singled out as the study items. From the results of dropping test by KS A 1026(General Rules of Performance Testing for Packaged Freights), relative equations were gained as follow : y=0.0863x+10.032 for microwave oven, y=0.136x+7.85 for TV and y=0.214x+5.8 for washing machine (where y is G-factor and x is Dropping height). The maximum values of dropping shock during materials handling were measured to be $11{\sim}14G$ for microwave oven, $12{\sim}15G$ for TV and $10{\sim}12G$ for washing machine. The maximum shocks of microwave oven, TV and washing machine during materials handling were corresponding to dropping shocks of dropping height 45.98cm, 52.57cm and 28.97cm by KS A 1026.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.1
• /
• pp.23-26
• /
• 2002

This study was carried out to investigate vibration shock and dropping shock of refrigerator during physical distribution. The values of vibration shock were measured to be ${\sim}3G$ for up and down direction, ${\sim}0.8G$ for right and left direction and ${\sim}0.5G$ for back and forth direction on the national road. There was no damage during transport. From the results of dropping test by KS A 1026(General Rules of Performance Testing for Packaged Freights), relative equations were gained as follow : y = 0.12x + 7.63(where y is G-factor and x is Dropping height). The maximum values of dropping shock during materials handling were measured to be 11G. This shock value was corresponding to dropping shocks of dropping height 28.3cm by KS A 1026.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.723-726
• /
• 1998

Fault dropping is a very important part of test generation process. It is used to reduce test generation time. Test generation systems use fault simulation for the purpose of fault dropping by identifying detectable faults with generated test patterns. Two kinds of delay fault model is used in practice, path delay fault model and gate delay fault model. In this paper we propose an efficient method for gate delay test generation which shares second test vector.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.32-40
• /
• 2009

In order to reduce time-to-market, the demand for fast fault diagnosis has been increased. In this paper, a fault dropping technique with fault candidate ordering and test pattern ordering for fast fault diagnosis is proposed. Experimental results using the full-scanned ISCAS 89 benchmark circuits show the efficiency of the fault dropping technique with fault candidate ordering and test pattern ordering.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.293-304
• /
• 2005

As the eye irritant test of lens washing agent, ReNu$^{TM}$ was analysed using Draize methods (1959) according to KFDA Guidelines. In addition, to test the potential toxicity of test articles the ratio of inflammatory cells and non-inflammatory epitheloid cells were also observed using smear cytology methods against ocular discharge. At test, the histopathological changes on the cornea, iris, retina and sclera were also observed in all animals. Slight irritancy of the cornea and conjunctiva were observed at 1, 2 and 3 days after dropping in non-washing group. The Mean Index of Ocular Irritation(MIOI) of these points are detected as 4.17, 3.00 and 1.33, respectively. In washing group, slight irritancy of the cornea and conjunctiva were observed at 1 and 2 days after dropping with MIOI as 0.67 and 1.33, respectively. Therefore, ReNu$^{TM}$ was considered as non-irritating materials because the MIOI is detected below 5.00 throughout the whole experimental periods in both washing and non-washing groups. The Index of Acute Ocular Irritation(IAOI) is also detected as 4.17(1 day after dropping). Except of the somewhat increase trend of the inflammatory cell ratios in ocular discharge at 1 day after dropping of non-washing group, but significances are not detected, on the other hand, no meaningful changes on smear cytology of ocular discharges are observed in this study. In addition, no abnormal histopathological changes on the cornea, iris, retina and sclera were also not detected in ReNu$^{TM}$ dropping group compared to that of non-treated control eyes.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.401-410
• /
• 1997

Scattering of seeds is one of the problems in the hill- dropping planters with a roller-type metering device. For crops like rice, corns and beans, the hill-dropping is own better for a high yield than the drill planting. The roller type metering device has been used for the drill planters and has many advantages. However, it has a problem of scattering of seeds when they are placed on rows. In this study a method was developed to design the roller type metering device fir the precision hill-droppings. Design parameters were derived to configure completely the geometries of the roller and brush. The method was applied to the design of the metering device of the rice seeding machines. The field test showed that the metering device designed by the method made a better performance of seed placement than that made by the precvious one. The method also can be applied to the design of metering devices for the precise hill-droppings of other crops.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.269-275
• /
• 2006

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required to improve bearing lubrication. Three urea/ether oil greases with different composition were synthesized to compare the performance of these greases. The typical grease physical properties were investigated, and life test of these greases was conducted by FE-9 grease life tester. The grease with higher content of the thickener showed higher performance. After these preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT value. And optimized conditions for grease synthesis were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT value respectively. The optimized grease using OIT value showed longer grease life than that using dropping point. Two greases were synthesized following the optimum synthesis conditions by means of OIT value. Then grease life and other properties of these greases were investigated. These two greasaes showed longer grease life than typical urea/ether oil grease.

• Corrugated packaging logistics
• /
• v.8 no.39
• /
• pp.102-106
• /
• 2001