• Title/Summary/Keyword: drop system

Search Result 1,909, Processing Time 0.026 seconds

Design and Implementation of Mobile ]Respiration Detection Diagnostic System using Ultrasound Sensing Method fficient Multicasting Environment (초음파 센싱 방식을 이용한 이동형 호흡량 측정 진단기의 설계 및 구현)

  • 김동학;김영길
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.2
    • /
    • pp.509-515
    • /
    • 2004
  • Pulmonary function tests are widely used to diagnose and determine patients' therapy in clinic. And it was also applied in the research of the physiology and dynamics for lung disease. Among the pulmonary function tests, spirometry is the most easy and economic test. Spirometers are medical instruments that measure the instantaneous rate of volume flow of respired Bas. The mechanical spirometer was mostly used in the past. Up to the present, the most popular method of spirometer is the differential pressure technique with which change in the volume of flow are transferred to change in pressure. This kind of instrument suffers from several limitations, pressure drop, difficulty in maintenance and short period of calibration. Therefore, this study has begun to implement ultrasound spirometer, which is free of pressure loss and has wide range, focusing on the flow measurement technique and diagnostic algorithm.

Air-Side Performance of Fin-and-Tube Heat Exchangers Having Non-Symmetric Slit Fins Under Wet Condition (비대칭형 슬릿 핀이 적용된 핀-관 열교환기의 습표면 성능)

  • Kim, Nea-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.6
    • /
    • pp.3698-3707
    • /
    • 2015
  • In this study, wet surface heat transfer and friction characteristics of non-symmetric slit-finned heat exchangers are experimentally investigated. Louver-finned heat exchangers are also tested for comparison purpose. The effect of fin pitch on j and f factor is negligible. Louver fin samples yield higher j and f factors than slit fin samples. For one row, j and f factors of louver fin are 27% and 31% higher than those of slit fin. For two row, j and f factors of louver fin are 15% and 30% higher. Both j and f factor decrease as the number of tube row increases. For one row, average j/f ratios of slit fin samples are 3.4% larger than those of louver fin samples. For two row, average j/f ratios of slit fin samples are 11.5% larger. A new correlation was developed using the present data.

Cushioning Efficiency Evaluation by using the New Determination of Cushioning Curve in Cushioning Packaging Material Design for Agricultural Products (농산물 포장용 지류완충재의 새로운 완충곡선 구현을 통한 완충성능 평가)

  • Jung, Hyun Mo
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.19 no.1
    • /
    • pp.51-56
    • /
    • 2013
  • From the time the product is manufactured until it is carried and ultimately used, the product is subjected to some form of handling and transportations. During this process, the product can be subjected to many potential hazards. One of them is the damage caused by shocks. In order to design a product-package system to protect the product, the peak acceleration or G force to the product that causes damage needs to be determined. When a corrugated fiberboard box loaded with products is dropped onto the ground, part of the energy acquired due to the action of the gravitational acceleration during the free fall is dissipated in the product and the package in various ways. The shock absorbing characteristics of the packaging cushion materials are presented as a family of cushion curves in which curves showing peak accelerations during impacts for a range of static loads are shown for several drop heights. The new method for determining the shock absorbing characteristics of cushioning materials for protective packaging has been described and demonstrated. It has been shown that cushion curves can be produced by combining the static compression and impact characteristics of the material. The dynamic factor was determined by the iterative least mean squares (ILMS) optimization technique in which the discrepancies between peak acceleration data predicted from the theoretical model and obtained from the impact tests are minimized. The approach enabled an efficient determination of cushion curves from a small number of experimental impact data.

  • PDF

Comparison of tissue tropism of Newcastle disease vaccine viruses by Immunohistochemistry techniques (면역조직화학기법을 이용한 뉴캣슬병 백신바이러스의 조직친화성 비교)

  • Kim, Min-Jeong;Kwon, Yong-Kuk;Seong, Hwan-Woo;Kang, Shien-Young;Mo, In-Pil
    • Korean Journal of Veterinary Research
    • /
    • v.44 no.4
    • /
    • pp.539-549
    • /
    • 2004
  • Mean death time of inoculated embryonated egg is one of the methods to determine the virulence of the Newcastle disease viruses (NDV). Evaluation of tissue tropism of NDV in the host has been proposed as an another way to determine the pathogenicity of NDV based on the principal site of viral replication. To evaluate the tissue tropism among NDV, an immunohistochemistry(IHC) technique using monoclonal antibody was applied in one-day-old SPF chickens inoculated with different ND vaccine strains such as Ulster 2C, VG/GA and B1 viruses by eye drop instillation. The tissues used for this comparison were trachea, intestine, Harderian gland and cecal tonsil, which were collected at 0.5, 1, 2, 3, 5, 8, 10, 14 days post inoculation. Among test groups, chickens inoculated with B1 viurs, which is known to replicate in the respiratory system, have IHC positive staining mainly in the trachea and those inoculated with Ulster 2C have IHC positive staining mainly in the intestine. However, chickens inoculated with VG/GA strain have IHC positive staining in both the trachea and intestine. Therefore, a differences in tissue tropism among ND vaccine strains has been proved by the IHC technique. Based on this results, the IHC staining technique could be used to classify the NDV or to study the pathogenesis of NDV in chickens.

Disparities in Health Care Utilization Among Urban Homeless in South Korea: A Cross-Sectional Study

  • Yoon, Chang-Gyo;Ju, Young-Su;Kim, Chang-Yup
    • Journal of Preventive Medicine and Public Health
    • /
    • v.44 no.6
    • /
    • pp.267-274
    • /
    • 2011
  • Objectives: We examined health care disparities in Korean urban homeless people and individual characteristics associated with the utilization of health care. Methods: We selected a sample of 203 homeless individuals at streets, shelters, and drop-in centers in Seoul and Daejeon by a quota sampling method. We surveyed demographic information, information related to using health care, and health status with a questionnaire. Logistic regression analysis was adopted to identify factors associated with using health care and to reveal health care disparities within the Korean urban homeless population. Results: Among 203 respondents, 89 reported that they had visited health care providers at least once in the past 6 months. Twenty persons (22.5%) in the group that used health care (n = 89) reported feeling discriminated against. After adjustment for age, sex, marital status, educational level, monthly income, perceived health status, Beck Depression Inventory score, homeless period, and other covariates, three factors were significantly associated with medical utilization: female sex (adjusted odds ratio [aOR, 15.95; 95% CI, 3.97 to 64.04], having three or more diseases (aOR, 24.58; 95% CI, 4.23 to 142.78), and non-street residency (aOR, 11.39; 95% CI, 3.58 to 36.24). Conclusions: Health care disparities in Seoul and Daejeon homeless exist in terms of the main place to stay, physical illnesses, and gender. Under the current homeless support system in South Korea, street homeless have poorer accessibility to health care versus non-street homeless. To provide equitable medical aid for homeless people, strategies to overcome barriers against health care for the street homeless are needed.

Effect of Hydraulic Loading Rate of a Continuous Stirred Tank Reactor(CSTR) on the Removal Efficiency of Pollutants of Pig Slurry (CSTR의 수리학적 부하율이 돈슬러리의 유기물 및 영양염류 저감효율에 미치는 영향)

  • 정우철;최홍림
    • Journal of Animal Environmental Science
    • /
    • v.5 no.3
    • /
    • pp.189-196
    • /
    • 1999
  • Anaerobic digestion is a naturally occuring microbial process involving the decomposition of organic materials such as livestock manure. This study explores the effect of the operating conditions, HRT (Hydraulic Retention Time) and feeding frequency on treatment efficiency for digestion of pig slurry, which has been one of most difficult organic waste for proper treatment in livestock production industry in Korea at the present time. The pilot-scale CSTR of 5 m3 in volume was designed. manufactured, and operated at the temperature of 35$\pm$1$^{\circ}C$. The digester was designed to hydraulically stir for complete mixing and to supply heat from the water bath to maintain mesophilic temperature. The HRT of the digester for Test 1 and Test 2, and Test 3 was set for 17 days and 13 days respectively and pig slurry was fed once a day with 300$\ell$ each for Test 1 and Test 3, while twice with 150$\ell$each for Test 2. Test 2 showed better performance by increase of 4% in VS removal efficiency and 5% in biogas production rate. This is mainly attributed to smaller temperature drop by feeding frequently with half amount, which eventually led to lesser impact on anaerobic mocrobes in the digester. Test 2 maintained optimum pH 7.8 which uplifted the activaton of sulfur-reduction bacteria, alkalinity of around 4,000mg/$\ell$, VA of over 3,000mg/$\ell$ for whole period of experiment. Further research may require to provide the practical operation strategy of anaerobic treatment system for treatment of pig slurry.

Investigation on the Microbiological and Biochemical Properties of Kimchi in the Solid-state Model System Designed for Fermented Sausages

  • Lee, Joo-Yeon
    • Food Science of Animal Resources
    • /
    • v.30 no.2
    • /
    • pp.236-242
    • /
    • 2010
  • The objective of this study was to investigate the potential of the application of kimchi LAB as starter culture in the production of fermented sausages. For this, the solid-state model media composed to simulate the substantial conditions of meat mixtures were fermented for 120 h after the treatment with different concentrations of kimchi (0.5, 1.0, 1.5, 3.0, and 5.0%) and lyophilized kimchi-powder (0.2 % and 0.5%). During the fermentation period, the growth of total viable cells and LAB, and the changes of pH and titratable acidity were investigated. The initial LAB counts ranged from 7.18 to 8.34 Log CFU/ mL for kimchi media and from 6.93 to 6.94 Log CFU/mL for kimchi-powder media depending on the added concentrations. The kimchi LAB in this study were not influenced by the immobilized condition for their adaptation and growth by showing no lag phase and thus acted similar as in the submerged medium. The initially increased counts reached around 9 Log CFU/ mL in 12 h independent of the concentrations of a ded kimchi. However, the growth and metabolic activity of kimchi-powder LAB were influenced by the immobilized condition. Supposedly, as the nutrient supply in solid-state depended solely on diffusion, these differences in the souring properties were caused by the LAB topography in the medium matrix. Nevertheless, the differences in the numbers of LAB between two media were less than 0.5 Log units and the pH drop in the solidstate batches was quite rapid and reached low values. Therefore, it can be assumed that kimchi and kimchi-powder LAB showed the utility as the substitute of commercial starter culture even without a rehydrating pretreatment.

Dynamic behavior of SRC columns with built-in cross-shaped steels subjected to lateral impact

  • Liu, Yanhua;Zeng, Lei;Liu, Changjun;Mo, Jinxu;Chen, Buqing
    • Structural Engineering and Mechanics
    • /
    • v.76 no.4
    • /
    • pp.465-477
    • /
    • 2020
  • This paper presents an investigation on the dynamic behavior of SRC columns with built-in cross-shaped steels under impact load. Seven 1/2 scaled SRC specimens were subjected to low-speed impact by a gravity drop hammer test system. Three main parameters, including the lateral impact height, the axial compression ratios and the stirrup spacing, were considered in the response analysis of the specimens. The failure mode, deformation, the absorbed energy of columns, as well as impact loads are discussed. The results are mainly characterized by bending-shear failure, meanwhile specimens can maintain an acceptable integrity. More than 33% of the input impact energy is dissipated, which demonstrates its excellent impact resistance. As the impact height increases, the flexural cracks and shear cracks observed on the surface of specimens were denser and wider. The recorded time-history of impact force and mid-span displacement confirmed the three stages of relative movement between the hammer and the column. Additionally, the displacements had a notable delay compared to the rapid changes observed in the measured impact load. The deflection of the mid-span did not exceed 5.90mm while the impact load reached peak value. The impact resistance of the specimen can be improved by proper design for stirrup ratios and increasing the axial load. However, the cracking and spalling of the concrete cover at the impact point was obvious with the increasing in stiffness.

Detection of Innate and Artificial Mitochondrial DNA Heteroplasmy by Massively Parallel Sequencing: Considerations for Analysis

  • Kim, Moon-Young;Cho, Sohee;Lee, Ji Hyun;Seo, Hee Jin;Lee, Soong Deok
    • Journal of Korean Medical Science
    • /
    • v.33 no.52
    • /
    • pp.337.1-337.14
    • /
    • 2018
  • Background: Mitochondrial heteroplasmy, the co-existence of different mitochondrial polymorphisms within an individual, has various forensic and clinical implications. But there is still no guideline on the application of massively parallel sequencing (MPS) in heteroplasmy detection. We present here some critical issues that should be considered in heteroplasmy studies using MPS. Methods: Among five samples with known innate heteroplasmies, two pairs of mixture were generated for artificial heteroplasmies with target minor allele frequencies (MAFs) ranging from 50% to 1%. Each sample was amplified by two-amplicon method and sequenced by Ion Torrent system. The outcomes of two different analysis tools, Torrent Suite Variant Caller (TVC) and mtDNA-Server (mDS), were compared. Results: All the innate heteroplasmies were detected correctly by both analysis tools. Average MAFs of artificial heteroplasmies correlated well to the target values. The detection rates were almost 90% for high-level heteroplasmies, but decreased for low-level heteroplasmies. TVC generally showed lower detection rates than mDS, which seems to be due to their own computation algorithms which drop out some reference-dominant heteroplasmies. Meanwhile, mDS reported several unintended low-level heteroplasmies which were suggested as nuclear mitochondrial DNA sequences. The average coverage depth of each sample placed on the same chip showed considerable variation. The increase of coverage depth had no effect on the detection rates. Conclusion: In addition to the general accuracy of the MPS application on detecting heteroplasmy, our study indicates that the understanding of the nature of mitochondrial DNA and analysis algorithm would be crucial for appropriate interpretation of MPS results.

A Study on the Performance of Steam Ejector by Variation of Steam Pressure (증기압력 변화에 따른 증기 이젝터의 성능에 관한 연구)

  • Jun You-Sin;Shin You-Sik;Jin Zhen Hua;Jeong Hyo-Min;Chung Han-Shik
    • Proceedings of the SAREK Conference
    • /
    • 2006.06a
    • /
    • pp.761-766
    • /
    • 2006
  • This paper describes a study on the performance of steam ejector by variation of steam pressure. Water temperature is especially important for good qualify of fish in an inland aquafam. In summer season, the water temperature increases above $25^{\circ}C$, but for good quality breeding or fish is the maintenance of optimum aquafam temperature by about $20^{\circ}C$. Therefore it is needed to drop the water temperature to provide suitable conditions of fish growth. There are many kinds of cooling system, in this study using steam ejector. After cooling the water in vacuum tank with the steam ejector then circulate this water to inland aquafam. In this way to minimizes fish stress that it is caused by water temperature. The objective of research confirms the difference of the case which there is no water in the vacuum tank and has water in the vacuum tank. The purpose of this paper is to examine the effects on the performance of steam ejector by variation of steam pressure.

  • PDF