• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.269-276
• /
• 2023

In this research works, we propose a hybrid power generation system for drone capable of staying in the air for more than 1 hour. This power system converts the alternating current generated by the generator into direct current through a diode bridge circuit to charge the battery and uses a battery system having separated cells to obtain high controllability of the power system. The fuel efficiency and the power output for individual load were analyzed, and also the performance of a selected generator was studied in this paper. The drone which is equipped with the proposed hybrid power generation system calculated 0.82 ratio for weight vs power output, and flight time of drone showed 4,179 seconds.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.83-91
• /
• 2021

In this paper, presents an efficient education method for training specialized edutainment SW education instructors and drone realistic media creators, not just training to acquire certificates through drone manipulation training. To this end, the NCS-based curriculum was derived. The developed curriculum includes the edutainment drone curriculum and the realistic media creator curriculum. Among them, core responsibilities were defined for the drone control curriculum and core tasks, knowledge, and attitudes were described for each. After that, a detailed curriculum for drone control was derived. In the realistic media creator curriculum, pilot education was conducted to actually produce advertisement videos to foster experts who can work directly in the industrial field. Finally, through holding an online conference in a metaverse environment, a virtual conference was operated to share and discuss media videos produced by trainees. After the end of education, the efficiency of this curriculum was proved through education satisfaction analysis for 46 education graduates. This paper presented a method to achieve internalization of SW education in non-face-to-face online education that our society must solve after post-COVID-19. In addition, an efficient educational method in a realistic media environment was suggested by showing a realistic media creator training curriculum, pilot programs, and metaverse conference management cases.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.601-608
• /
• 2017

In the fourth industrial revolution, drones are an important element to lead the industry by converging with information technology. Drones are developing various technologies by combining with communication / navigation / traffic management technology, control and detection / avoidance technology, sensor technology, SW and application technology. However, there are various problems in order to settle the drone technology. In this paper, it will be examined the problems of application of drones through application fields of drones, domestic and foreign cases, and core technologies of drones. The growth of the drone market requires improvement of laws and institutions. This paper proposed security vulnerability, privacy and safety problem in wireless communication, and present technical and management problems for drone service in the Korean environment in particular.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.103-112
• /
• 2020

Recently, the interest in hobby/leisure drones is increasing in the private sector, and the military also uses drones in various countries such as North Korea, the United States, and Iran for military purposes such as reconnaissance and destruction. A variety of drone related research is underway, such as establishing and operating drone units within the Korean military. Inparticular, recently, as the size of drone flight control source code increases and the number of functions increases, drone developers are getting accustomed to using open sources and using them without checking for separate security vulnerabilities. However, since these open sources are actually accessible to attackers, they are inevitably exposed to various vulnerabilities. In this paper, we propose an attack scenario for military drones using open sources in connection with these vulnerabilities using Telemetry Hijacking techniques.

• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.46-52
• /
• 2018

This paper is to study the development of three dimensional Digital Surface Model (DSM) using photogrammetry technique based on self-developed Drone (Unmanned Aerial Vehicle (UAV)). To develop DSM, we selected a study area in Jeju island and took 24 pictures from the drone. The three dimensional coordinates of the photos were made by Differential Global Positioning System (DGPS) surveying with 10 ground control points (GCP). From the calculated three dimensional coordinates, we produced orthographic image and DSM. The accuracy of DSM was calculated using three GCPs. The average accuracy of X and Y was from 8.8 to 14.7 cm, and the accuracy of Z was 0.8 to 12.4 cm. The accuracy was less than the reference accuracy of 1/1,000 digital map provided by National Geographic Information Institute (NGII). From the results, we found that the self-developed drone and the photogrammetry technique are a useful tool to make DSM and digital map of Jeju.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.591-598
• /
• 2017

The changes of technology and the size of markets for unmaned aerial vehicle are getting bigger presently. Damage happens because of user's poor operation since accesses to the drones are easy. To minimize the damage, drone's stabilized flight skills are required, and controlling the motor to balanced speed is also needed. Thus, the essay shows that we use Arduino as a main control device for controlling a drone, and used acceleration sensor and gyro sensor for the drone stabilization. Also, we made it able to hover at a certain height by using a sonar sensor. We also controlled a drone by using an Android application, and made the drone hover stably at 0~2 meters.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1169-1176
• /
• 2018

The C-band omni-directional antenna for drone control is mounted on the top or bottom and used to configure the communication link. The communication link is affected by the LOS depending on the mounting position of the omni-directional antenna. In this paper, two kinds of embedded antennas were designed with a commercial simulation tool CST MWS, and EM analysis was performed to consider the mounting environment. Also, we propose the PTMP ground antenna to control a large number of drones. The ground antenna has a communication link of 30km, and it consists of four sector antennas in the horizontal direction and one directional antenna at the top.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.472-477
• /
• 2023

In this paper, we proposes the use of Model Predictive Control (MPC) techniques to enable quadcopter drones to effectively follow paths and maintain flight safety even under dynamic external environments and disturbances. Through simulations conducted in MATLAB/Simulink, the performance of two controllers, PID and MPC, is compared in flight scenarios with disturbances. The proposed design method shows that the MPC controller, when compared to the PID controller, exhibits a difference in the Mean Squared Error between the intended flight path and the actual path of the quadcopter drone. This difference is 0.2 in performance under no disturbance, and it increases to 0.8 under disturbance, demonstrating the improved path following accuracy of the MPC controller.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2004

This paper deals with the automatic flight control system for an unmanned target drone which is operated by an army as an anti-air gun shooting training. By automation of unmanned target drone that is manually operated by external pilot, pilot can reduce workload and an army can reduce the budget. Most UAVs which are developed until today use high-cost sensors as AHRS and IMU to measure the attitude, but those are contradictory for the reduction of budget. This paper says the development of low-cost automatic flight control system which makes possible of automatic flight with low-cost sensors. We have developed the integrated automatic flight control system by integrating electricity module, switching module, monitoring module and RC receiver as an one module. We also prove the performance of automatic flight control system by flight test.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.