• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.89-95
• /
• 2005

This paper intends to identify experimentally the relationship between transverse vibration behavior of a spinning disk and high-frequency fluctuation in the driving torque. A testrig has been developed using a CD-ROM disk, a driving motor with torque-varying capability and a power transmission belt and a laser vibrometer was employed to measure the transverse vibration displacements of the disk for a certain range of the spinning speed. The results show that the spinning speed and the magnitude and frequency of the torque fluctuation affect the stability of the disk. In other word, the torque fluctuation causes the instability of the disk at several ranges of the spinning speed below the critical speed and its effects become larger as the disk spins faster or the magnitude of torque fluctuation becomes bigger. The experimental results are found to be in good agreement with analytical estimation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.443-451
• /
• 2020

A futuristic locomotion system called Hyperloop is projected for driving at ulta-high speed, levitated in the tube. In hyperloop localization of pods on the linear synchronous motor is essential for pod driving. precision localization is required for acceleration and deceleration of pods driving at speed above 1,000km/h, and also required for adjusting the pod speed driving at this very-high speed to maintain inter-vehicle distance. In this work, a new scale of localization is challenged by modified laser surface velocimeter. In acceleration the speed of a virtual pod is calculated along its displacement measured by laser reflection. Under the requirement of precise localization of the pod driving at ultra-high speed, a displacement measurement device, which detects the difference in reflections from tiles passing by the pod, is developed and evaluated through performance test. Tests of pod speeds below 500km/h have showed exact localization results of the precision in centimeters, and tests of pod speeds above 500km/h have showed localization with very low error rates under 0.1%. For the measurement above 500km/h, future works would pursue the error rate converges to zero.

• Composites Research
• /
• v.37 no.2
• /
• pp.86-93
• /
• 2024

The inner foam structure plays an important role in the performance of the carbon-fiber-reinforced plastic (CFRP) rear spoiler used in automobiles. However, there is still a lack of studies for the CFRP-based rear spoiler according to the type of inner foam, especially under the high-speed driving condition. With this motivation, we numerically analyze the performance of the CFRP rear spoiler using various cases of the inner foam under the highspeed driving condition. Here, polymethacrylimide (PMI), polyvinyl chloride (PVC), and styrene acrylonitrile (SAN) resins are employed as the inner foams in this work. The performances are evaluated using the deformation aspects and vibration characteristics when the driving condition is a high-speed condition (200 km/h). Furthermore, to specifically verify the importance of the inner foam in the high-speed condition, we additionally investigate the performance of the CFRP rear spoiler without the inner foam structure (i.e., hollow type). As a result, it is confirmed that among the types of inner foams utilized in this work, the PMI and PVC inner foams have the best deformation aspect and vibration characteristic, respectively. Note that the hollow-type inner foam has inferior performances compared to other inner foams invoked in this study. Consequently, through this study, it can be confirmed that the inner foam structure can significantly improve the performance of the CFRP spoiler under high-speed driving condition (200 km/h), and also that the strengths of the CFRP spoiler can manifest differently depending on the types of inner foam core.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze relationship between biomechancal factors and diver's distance during golf driver swing. Fifteen professional golfers were participated in as subject. Eight motion capture cameras(250 Hz), 2 force plates(1000 Hz), and Trackman were used to collect kinematic and kinetic datas. It was performed Pearson's correlation analysis using SPSS 24.0. The level of significance was at .05. Ball speed, club head speed, X-Factor, and ground reaction force were correlated on driving distance, However, smash factor and knee moment were not correlated on driving distnace. Ball speed, club head speed, X-Factor, and ground reaction force were effected to driving distance, but smash factor and knee moment were not effected to driving distance.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.101-112
• /
• 2009

Recently, with the existing speed-management by law enforcements and physical speed-reduction facilities, the country newly adopted Driver Feedback Sign (DFS) system, which displays driving speed in order to guide the driver to an advisable driving condition. DFS is mainly used in school zones due to reasons related to the ITS. Accordingly, because it is predictable that DFS will result in speed-reduction without legal forces and would have an effect on physical speed-reduction facilities, intersection, crosswalks, and road-alignments, this study will try to verify the efficiency of DFS by researching the vehicle speed in national highways and school zones, which have similar conditions to the urban arterial road. In consequence, on national highways, the drivers had a tendency to travel according to the road-environment such as urban arterial road and not reduce speed voluntarily. In school zones, drivers tend to reduce speed in mornings and afternoons when children travel to school or home, showing that the resulting effect is different according to the road-environment where DFS is installed, and the time slot of the DFS.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.4
• /
• pp.26-30
• /
• 2015

Exceeding the speed limit during vehicle driving is a key factor in the severity of lots of road accidents, and SLIF(Speed Limit Information Function) application is in the initial phase in Korea. SLIF helps the drivers to observe a speed limit when they are driving by providing alert and informing the current limit speed information based on external data using camera and/or digital map, for that reason, environmental conditions could be causes of SLIF malfunctions. In this study, design adequacy analysis of SLIF in respect of false recognition as the Korea traffic environment has been performed. As tentative results, road conditions and structure of speed limit sign as well as system performance often caused misrecognition.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.61-69
• /
• 2022

As the delivery industry grew around the restaurant industry along with the COVID-19 situation, the number of delivery workers increased significantly. Along with that, new forms of delivery using personal mobility (PM) also emerged and two-wheeled or PM-related accidents are steadily increasing. This study manufactures a PM's driving analysis device to establish a safe delivery monitoring environment. This system was constructed to process data collected from the driving analysis device and through a cloud server, which would recognize and record special situations (acceleration/deceleration, speed bump) that could occur during the PM's driving situation. As a result, the angular speed, acceleration, and geomagnetic values collected from the IMU in the device were able to determine whether to drive, drive on the sidewalk, and drive on the speed bump. This technology was able to achieve approximately 1600 times more driving information storage efficiency than conventional image-based recording devices.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.35-40
• /
• 2005

In the present study, the influence of operating conditions on fuel economy for hybrid electric vehicle was analyzed. In order to accomplish this, vehicle speed, engine speed, battery current and voltage, SOC (state of charge),motor speed and torque, generator speed and torque, engine coolant temperature etc. were measured in real time. The tests were carried out under different driving cycles which are urban and highway cycles, KOREA CITY cycle and on-road driving, and also under various operating conditions such as different initial SOC, with or without regenerative braking etc.. Generally, conventional gasoline engines show a poor fuel economy at stop and go driving, because braking energy is wasted and the engine is operated in low thermal efficiency regions. However, in case of hybrid vehicles, higher fuel economy can be obtained because of utilizing the maximum thermal efficiency regions of engine, idling stop of engine, and regenerative braking etc..

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.127-134
• /
• 2003

In this paper, the speed control problem of moving camera is investigated for tracking the movement of the human-face. The camera system with pan-tilt mechanism sends an image to PC and PC sends back tracking coordinate to the camera. Then the camera tracks a human face in real time. The speed of the stepping motors for moving the camera must be controlled to the target region fast enough and smoothly, In this paper, a fuzzy logic controller is proposed for driving step motors. By creating driving acceleration and deceleration speed Profile, the speed of the motors is controled fast and smoothly. Experiments are performed to show the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.395-402
• /
• 2000

This paper presents the improvement for speed characteristics of a Brushless DC Motor (BLDCM), it was applied to digital PI control for this. The practical PID control has been widely used to velocity control of DC motors. In this paper, a digital PI controller is used in order to decrease the speed error in constant velocity control of BLDCM. A TMS320C31 DSP is used for the microprocessor of digital PI control. The method using the DSP carry out the real-time control. The DSP has the rapid calculation ability and sampling time used lms. Driving BLDCM used 50W, motor input DC 150V and rotation speed 3000rpm. When BLDCM is to approval for discretion velocity at the acceleration and deceleration driving with any load, it was a feasible for stabilization control. Therefore, the experimental results indicate the superiority and validity of the velocity control by digital PI control.