• Wind and Structures
• /
• v.29 no.4
• /
• pp.279-297
• /
• 2019

Strong winds threaten the safety of vehicles on long-span bridges considerably, which could force traffic authorities to reduce speed limits or even close these bridges to traffic. In order to maintain the safe and economic operation of a bridge, a reasonable evaluation of the driving safety on that bridge is needed. This paper aims at carrying outdriving safety analyses for three types of vehicles on a long-span bridge in crosswinds by considering the aerodynamic interference between the bridge and the vehicles based on the wind-vehicle-bridge coupling vibration analysis. Firstly, CFD numerical simulations along with previously obtained wind tunnel testing results were used to determine the aerodynamic force coefficients of the three types of vehicles on the bridge. Secondly, the dynamic responses of the bridge and the vehicles under crosswinds were simulated, and based on those, the driving safety analyses for the three types of vehicles on the bridge were carried out for both cases considering and not considering the aerodynamic interference between the vehicles and the bridge. Finally, the effect of the aerodynamic interference on the safety of the vehicles was investigated. The results show that the aerodynamic interference between the bridge and the vehicles not only affectsthe accident critical wind speed but also the accident type for all three types of vehicles. Such effects are also different for each of the three types of vehicles being studied.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.59-72
• /
• 2018

PURPOSES : This study was conducted to develop expressway safety treatments based on the analysis results of older driver behaviors through literature review, surveys, and driving simulator experiments. METHODS : In this study, three analyses were conducted: surveys of 700 older drivers to find the risk segments they recognized, driving simulator experiments with older and younger drivers to investigate driver behaviors, and expert surveys to find the priority of expressway safety treatments for older drivers. RESULTS : Through survey results it was found that merging areas and tunnels were identified as the most dangerous areas, and more dangerous older driver behaviors were observed on those expressway segments in the driving simulator experiments. In addition, the priorities of safety treatments for each segment of expressways were decided based on expert surveys. CONCLUSIONS : It was concluded that choice and concentration strategies of expressway safety treatments for older drivers should be applied as perceptions regarding dangerous spots and older driver behaviors, including geometric designs, safety facilities, regulation, and institutes to improve expressway safety.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2008

This study aims to identity the age group where driving performance significantly decreases based on the data collected from the Korea Transportation Safety Authority's driver aptitude tests in 2006. The test includes following six driving simulator-based tests: estimation of moving objects' speed, estimation of stopping distance, three tests for drivers' multi-task ability, and kinetic depth perception. These six test results were utilized for the identification of the age threshold applying the CART technique, suggesting driving ability significantly be decreased over 50s. This finding was confirmed by two analyses using the accident history data containing the information of accident and non-accident drivers and the degree of accident severity. The results of this study imply that accident prevention efforts should be enhanced over a wider range of age group than the current practice where the age of 65 is generally applied for the threshold dividing senior and non-senior driver groups.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.454-461
• /
• 2018

Background: Working conditions and psychosocial work factors have acquired an important role explaining the well-being and performance of professional drivers, including those working in the field of public transport. This study aimed to examine the association between job strain and the operational performance of public transport drivers and to compare the expositions with psychosocial risk at work of three different types of transport workers: taxi drivers, city bus drivers, and interurban bus drivers. Method: A sample of 780 professional drivers was drawn from three transport companies in Bogota (Colombia). The participants answered the Job Content Questionnaire and a set of sociodemographic and driving performance questions, including age, professional driving experience, work schedules, and accidents and penalties suffered in the last 2 years. Results: Analyses showed significant associations between measures of socio-labor variables and key performance indicators such road traffic accidents and penalties. Furthermore, multiple linear regression analysis contributed to explain significantly suffered accidents from key variables of the Job Demand-Control model, essentially from job strain. In addition, throughout post-hoc analyses, significant differences were found in terms of perceived social support, job strain, and job insecurity. Conclusion: Work stress is an issue that compromises the safety of professional drivers. This research provides evidence supporting a significant effect of job strain on the professional driver's performance. Moreover, the statistically significant differences between taxi drivers, city bus drivers, and interurban bus drivers in their expositions to work-related stress suggest the need for tailored occupational safety interventions on each occupational group.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.111-116
• /
• 2019

With the recent acceleration of industrial technologies and active research, wearable robot technologies have been applied to various fields. To study the utility of wearable robots, basic research on kinetic mechanisms of the human body, bio-signal analysis, and system control are essential. In this study, we investigated the basic structure of a wearable system and the operating principles of a driving mechanism. The control system and supporting structure, which comprise the driving mechanism, were designed and manufactured. Motion and load analyses were performed simultaneously for the design of the kinematic drive, and the driving mechanism was constructed by analyzing walking motion. The operating conditions of the cylinder were verified by stride via driving experiments. Further, the accuracy and responsiveness of the system were confirmed by comparison with actual motion, and the system safety was validated by applying loads.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.24-31
• /
• 1995

This paper shows the fatigue durability test method for vehicle suspension systems. Durability should be assured for the safe driving during vehicle life cycle. A computer simulation for the vehicle dynamics was used to obtain dynamic loads that were required for the fatigue durability test. Durability tests were done for an Important load-carrying component of the suspension system. Stress analyses using stresscoat and strain gages were also done for the component. This study demonstrated an effective method for the fatigue durability test.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.642-646
• /
• 2008

Signaling system, for which ensuring safe train operation, must be a fail-safe system with higher reliability and safety. TCS has made significant improvements both on signaling system, from relay based ground signaling system to computer based on-board system, and on driving mode, form low speed and low density driving to TCS supporting high speed and high density driving. In addition, TCS has been applied to rolling stock with a wide variety of context according to the characteristics of rolling stock or railway infrastructure. In this paper, therefore, we confirmed the basic concept of ATC system and analyzed its development process in technology context via referencing international cases and ATC systems introduced and applied in Korea. Based on those analyses, we suggested the new TCS development strategy for its suitable application to high speed line, conventional line and metro, and we also provided technical considerations related to TCS application.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.2
• /
• pp.39-47
• /
• 2017

Although motorcycle safety studies to date have identified the causes of motorcycle accidents in general, very few have investigated postal motorcycle accidents by studying the delivery postmen's specific work environment. To better understand postal motorcyclists' driving behavior associated with their delivery workload, we developed a system using V-World platform which visualizes driving behavior in real time along the driver's delivery route throughout an entire work day. We conducted a field test to examine the feasibility of our system by involving six delivery postmen currently working in Songpa, Seocheongju, and Gangseo, respectively. To show the potential of our system for nationwide comparison of postal motorcyclists' driving behavior and their workloads, we present several sample analyses using the collected field data. Although ideally, postmen's workloads should be standardized nationwide, we found large variation depending on regional characteristics of work area which affects postmen's driving behavior.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2915-2923
• /
• 2022

There is an increasing interest in passive safety systems to minimize the need for operator intervention or external power sources in nuclear power plants. Because a passive system has a weak driving force, there is greater uncertainty in the performance compared with an active system. In previous studies, several methods have been suggested to evaluate passive system reliability, and many of them estimated the failure probability using thermal-hydraulic analyses and the Monte Carlo method. However, if the functional failure of a passive system is rare, it is difficult to estimate the failure probability using conventional methods owing to their high computational time. In this paper, a procedure for the application of the Chernoff bound to the evaluation of passive system reliability is proposed. A feasibility study of the procedure was conducted on a passive decay heat removal system of a micro modular reactor in its conceptual design phase, and it was demonstrated that the passive system reliability can be evaluated without performing a large number of thermal-hydraulic analyses or Monte Carlo simulations when the system has a small failure probability. Accordingly, the advantages and constraints of applying the Chernoff bound for passive system reliability evaluation are discussed in this paper.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.263-270
• /
• 2005

This paper presents a program for protecting vehicles against side winds on highways. The present study consists of three processes. The first one involves giving a guideline for evaluating driving safety in high winds. The second one involves making a guideline for determining the necessity of wind protection system for a certain road area. A reasonable procedure is suggested based on the probability model of wind data on weather stations and the correction of local topographical conditions. The third one involves design of wind barriers. Both CFD analyses and wind tunnel tests were performed to find the proper type of wind barrier considering vehicle controllability, structural safety, economical efficiency as well as driver's visibility. Performance of the designed wind fences was verified from field tests. The performance of the four different types of wind barrier installed at the elevated bridge were tested and some of the results were provided.