• 제목/요약/키워드: driving safety

검색결과 1,456건 처리시간 0.038초

심전도(LF/HF)를 활용한 졸음운전 예방 연구 (Study on Prevention of Drowsiness Driving using Electrocardiography(LF/HF) Index)

  • 문광수;황경인;최은주;오세진
    • 한국안전학회지
    • /
    • 제30권2호
    • /
    • pp.56-62
    • /
    • 2015
  • The purpose of this study was to identify the relationship between the index of Electrocardiography(LF/HF) and the occurrence of drowsiness driving while driving in a simulated situation. Participants were 31 undergraduate students with an experience in driving and they participated 30 minutes driving under enough sleep condition and 1 hour under the sleep deprivation condition. The Euro Truck Simulator II was used for driving simulation task and ECG and perceived drowsiness of each participants were measured during two driving conditions. Perceived sleepiness recorded by the checklist every 10 minutes and ECG data extracted before and after 15 seconds of every 10 minutes to verify the relationship between two variables. The results showed that the level of perceived sleepiness under sleep deprivation condition was higher than that under the enough sleep condition, and the level of LF/HF under sleep deprivation condition was lower than that under the enough sleep condition. In addition, the result of analysis of repeated measure ANOVA for ECG indicated that authentic sleepiness revealed in 20 minutes after the start of driving under the sleep deprivation condition. However, the result of perceived drowsiness indicated that authentic sleepiness revealed in 30 minutes after the start of driving. These result suggest that the time difference between biological and perceived response on drowsiness may be exist. Finally, the significant negative correlation between the LF/HF level and perceived drowsiness was observed. These findings suggest that ECG(LF/HF) can be an possible index to measure drowsiness driving.

국지지역 도로 기반 시설에서 안전운전을 위한 경보 정보 설계 (Amber Information Design to Keep Safety-Driving Under Road Structure at Local-Scale Geographic)

  • 박종찬;홍규장
    • 전기학회논문지P
    • /
    • 제58권1호
    • /
    • pp.48-55
    • /
    • 2009
  • In order to keep safe driving conditions under road networks, there are several formations such as road structure, road surface condition, traffic occupancy and supplement of an accurate information of traffic status ahead To support safe-driving on each road formation, each formation is supplied with various information to help the driver. However, in some cases like rapid status change at local-scale geography, traffic information systems often displays insufficient information because of the lack of information correlation. In order to accurately aware the driver, all road formation must be in sync. It is important to supply accurate information to the driver because this information directly impacts the drivers on the road. This paper discusses the amber information to keep the least safety driving over road formations including tunnels and bridges. This paper also will propose the informations for safe-driving conditions, information linkage on the road and rule-base safety information, as ITS technology, being displayed for all drivers under the worst weather conditions.

자동주행차량의 안전성 향상을 위한 원격비상정지시스템 (Remote Emergency Stop System to Improve Safety of Automated Driving Vehicle)

  • 유영재
    • 제어로봇시스템학회논문지
    • /
    • 제21권3호
    • /
    • pp.194-198
    • /
    • 2015
  • In this paper, a remote emergency stop system to improve the safety of an automated driving vehicle is proposed. One of the most serious problems of the previous wireless remote emergency system is that it does not work when the wireless channel is damaged in case of an emergency because it is composed of a single communication channel. Therefore, the proposed remote emergency stop system composed of a portable wireless remote system and a stationary wireless remote system is designed and the remote emergency stop system for automated driving vehicles is developed. By applying it to an automated driving vehicle to check it's performance, the wireless remote system is tested. Emergency stops using the portable wireless remote system is tested when the stationary wireless remote system is disconnected. Also, emergency stops using the stationary wireless remote system are tested when the portable wireless remote system is disconnected. The results of the emergency stop test show a satisfactory performance.

Real-Time Safety Driving Assistance System Based on a Smartphone

  • Kang, Joon-Gyu;Kim, Yoo-Won;Jun, Moon-Seog
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권8호
    • /
    • pp.33-39
    • /
    • 2017
  • In this paper, we propose a method which implements warning to drivers through real-time analysis of risky and unexpected driver and vehicle behavior using only a smartphone without using data from digital tachograph and vehicle internal sensors. We performed the evaluation of our system that demonstrates the effectiveness and usefulness of our method for risky and unexpected driver and vehicle behavior using three information such as vehicle speed, azimuth and GPS data which are acquired from a smartphone sensors. We confirmed the results and developed the smartphone application for validate and conducted simulation using actual driving data. This novel functionality of the smartphone application enhances drivers' situational awareness, increasing safety and effectiveness of driving.

자율협력주행 상용화촉진을 위한 법제개선 과제 (Tasks to Improve the Legal System in Response to Deployment of Connected Autonomous Vehicles)

  • 조용혁;김선아
    • 자동차안전학회지
    • /
    • 제13권4호
    • /
    • pp.81-91
    • /
    • 2021
  • Last year, the Autonomous Vehicle Act was enacted to respond to deployment of autonomous vehicles. But the Act stipulates the operation of autonomous vehicle pilot zones, In addition, in order to analyze autonomous vehicle accidents and establish a reasonable damage compensation system, the Automobile Damage Compensation Guarantee Act was revised. But, It is necessary to seek plans for institutional development such as detailed concepts of self-driving cars and driving, a security certification system for securing safety of autonomous cooperative driving, and enhancement of the effectiveness of special cases related to personal information processing. I would like to seek ways to improve the legal system to respond reasonably to the deployment of autonomous vehicles.

무선계측을 이용한 휠로더 구동토크의 주요인 분석 (Analysis of the Main Factor of Wheel Loader Torque via Wireless Measurements)

  • 강병익;동홍일;김병기;최용훈
    • 한국기계가공학회지
    • /
    • 제19권4호
    • /
    • pp.24-29
    • /
    • 2020
  • Measuring the torque of the wheel loader of a driving device is a preemptive task to ensure its performance. In this study, wireless torque measurements were successfully conducted. Moreover, based on the experimental results and the adopted design method, the key factor of torque generation, which is the main load in driving devices, was analyzed. Other data not analyzed in this paper will be the basis for the logical design of wheel loader-based driving devices.

맥박센서를 이용한 졸음방지운전시스템에 관한 연구 (A Study on the Drowsy Driving Prevention System using the Pulse Sensor)

  • 박춘명
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.577-578
    • /
    • 2016
  • 본 논문에서는 차량운행 시 일어날 수 있는 졸음운전 사고를 예방하기 위해 맥박 센서를 이용하여 차량 안전시스템 구성을 제안하였다. 제안한 차량 안전시스템은 운전자의 졸음운전 상태를 판단하여 경보를 알리고, 이를 이용하여 운전자는 돌발적인 상황이나 위험상황을 미리 인지하여 직접적인 사고 및 2차 사고를 예방 할 수 있다.

  • PDF

전기동차 구동장치의 안전진단을 위한 진동.소음 측정 (Vibration and Noise Measurement on the Driving System of Electric Train for Safety Diagnosis)

  • 최연선;이봉현;최경긴;유원희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
    • /
    • pp.210-215
    • /
    • 1997
  • Safety diagnosis on the driving system of electric train is performed using the vibration and noise signals of running railway train. Safety diagnosis is tried on the viewpoints of the appreciation of superannuation and the fault diagnosis of motor, reduction gear and boggie. The appreciation of superannuation is checked by the rms vibration levels of driving parts and the fault diagnosis is done by analyzing the frequencies of the vibration signals. The methods of measuring and analyzing the signals are decided on the basis of field 1-measured signals. The results shows that the vibration levels of each parts increase as the train goes older and each parts have their own frequency patterns of the vibration. As the results, the vibration and noise can be utilized successfully for the safety diagnosis of the driving part of electric train.

  • PDF

동역학 시뮬레이션을 통한 농업부산물 수집기 체결장치의 안전성 분석 (Simulation Study on the Safety of a Fastening Device of Agricultural By-product Collector)

  • 김정훈;황석준;남주석
    • 드라이브 ㆍ 컨트롤
    • /
    • 제20권3호
    • /
    • pp.42-49
    • /
    • 2023
  • In this study, the safety of fastening device for the agricultural by-product collector was evaluated according to the driving ground conditions by deriving the stress, static safety factor, and fatigue life using dynamic simulation. A 3D modeling of agricultural by-product collector was carried out, and simulation model was developed by applying the material properties. As a result of dynamic simulation, the magnitude of the maximum stress generated in the fastening device was the highest when driving on the flat off-road, followed by sloped pave-road and flat pave-road. Static safety factor and fatigue life were the highest when driving on the flat pave-road, followed by sloped pave-road and flat off-road. The safety of fastening device was confirmed that static safety factor was more than 1.0 and service life exceeded 9 years in all driving ground conditions.

레벨 4 자율주행자동차의 제작 안전 가이드라인에 대한 고찰 (A Study on Safety Guideline of Level 4 Automated Driving Vehicles)

  • 이광구;우현구
    • 자동차안전학회지
    • /
    • 제13권3호
    • /
    • pp.86-94
    • /
    • 2021
  • Since automated driving system (ADS) has great potential to innovate various fields of automobile and mobility industries, major countries are establishing safety standards for autonomous vehicles to support technology development. However, in order to prevent technology development from being hampered by the safety standards for technologies still under development, safety guidelines are applied until the technologies are mature. For example, the safety 'guideline' for level 4 ADS was published in December 2020 by the Ministry of Land, Infrastructure and Transport of Korea, while the safety 'standards' for level 3 ADS was promulgated in December 2019. In this study, the domestic safety guideline for level 4 ADS is analyzed with the guidelines of major advanced countries in terms of safety elements. As it takes a lot of time before the safety standards of level 4 ADS is introduced, it is expected that the safety guideline will be updated several times. As necessary considerations when updating the safety guideline, industry acceptance, harmonization between safety elements, validation methods of system performance, and the user options are discussed.