• 로봇학회논문지
• /
• 제5권3호
• /
• pp.270-277
• /
• 2010

Various robot platforms have been designed and developed to perform given tasks in a hazardous environment for the purpose of surveillance, reconnaissance, search and rescue, and etc. We have considered a terrain adaptive hybrid robot platform which is equipped with rapid navigation on flat floors and good performance on overcoming stairs or obstacles. Since our special consideration is posed to its flexibility for real application, we devised a design of a transformable robot structure which consists of an ordinary wheeled structure to navigate fast on flat floor and a variable tracked structure to climb stairs effectively. Especially, track arms installed in front side, rear side, and mid side are used for navigation mode transition between flatland navigation and stairs climbing. The mode transition is determined and implemented by adaptive driving mode control of mobile robot. The wheel and track hybrid mobile platform apparatus applied off-road driving mechanism for various professional service robots is verified through experiments for navigation performance in real and test-bed environment.

• 자동차안전학회지
• /
• 제13권1호
• /
• pp.14-25
• /
• 2021

This paper presents a RLS based adaptive sliding mode observer (A-SMO) for unknown fault reconstruction in longitudinal autonomous driving. Securing the functional safety of autonomous vehicles from unexpected faults of sensors is essential for avoidance of fatal accidents. Because the magnitude and type of the faults cannot be known exactly, the RLS based A-SMO for unknown acceleration fault reconstruction has been designed with relationship function in this study. It is assumed that longitudinal acceleration of preceding vehicle can be obtained by using the V2V (Vehicle to Vehicle) communication. The kinematic model that represents relative relation between subject and preceding vehicles has been used for fault reconstruction. In order to reconstruct fault signal in acceleration, the magnitude of the injection term has been adjusted by adaptation rule designed based on MIT rule. The proposed A-SMO in this study was developed in Matlab/Simulink environment. Performance evaluation has been conducted using the commercial software (CarMaker) with car-following scenario and evaluation results show that maximum reconstruction error ratios exist within range of ±10%.

• 디지털융복합연구
• /
• 제17권11호
• /
• pp.207-213
• /
• 2019

대부분의 차량에 적용되어 있는 연료차단(fuel-cut) 관성주행은 변속기어 체결 상태에서 가속페달을 방치할 때 자동으로 작동하게 된다. 이 때 연료분사가 일시적으로 중단되므로 연비 향상 효과가 상당하다. 본 연구에서는 GPS를 이용하여 측정된 차속, 가속도, 도로구배 등의 신호를 바탕으로 하는 연료차단 관성주행 감지법을 제안하였다. 관성 주행시 작용하는 주행저항력에 의해 계산되는 가속도값과 GPS에서 실시간으로 측정되는 가속도값을 비교하는 방식이다. 실도로 주행 데이터를 측정하여 이 감지법을 평가한 결과 약 80% 수준의 정확도를 얻을 수 있었다. 도로구배가 다소 큰 12km 정도의 국도를 16분 동안 주행하면서 측정한 약 9,600개의 속도, 가속도, 도로구배 및 연료소모량 데이터에 감지법을 적용하여 얻은 결과이다. 인젝터 분사파형 분석을 위한 배선작업 등이 불필요하여 간단하게 연료차단여부를 판정할 수 있는 장점이 있다. 다만, 속도, 가속도 및 도로구배의 변화율이 연료소모량의 변화율에 비해 훨씬 크게 나타나기 때문에 감지법의 오차도 다소 증가하는 것을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.11-17
• /
• 2006

We have theoretically investigated the effects of the interplay between the driving voltage of Mach-Zehnder(MZ) modulators and the bandwidth of low-pass filters(LPF) in 10[Gb/s] duobinary modulation systems. For the change of driving voltage ratios(driving voltage/switching voltage), the transmission performance has been evaluated over 200[km] of single-mode fiber(SMF) systems. For driving voltage ratios with smaller than 100[%], the transmission performance has been maintained and greatly affected by the bandwidth of LPFs than the driving voltage. For driving voltage ratios with larger than 100[%], the transmission performance has been degraded and is not sensitive to the bandwidth of LPFs. To see the limitation of driving voltage, we have reduced the driving voltage ratio to 50[%]. Our results suggest that 10[Gb/s] duobinary signals with driving voltage ratio with smaller than 100[%] have been transmitted over 200[km] SMF within 2[dB] power penalty without dispersion compensation. For the driving voltage ratio with 50[%], we have verified that the transmission performance was maintained.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.159-165
• /
• 2010

본 논문에서는 원격제어기반 이동체 감지 및 변형 퍼스널 로봇시스템을 설계 및 구현하고 성능을 분석하였다. 설계에 있어서 중점적으로 고려한 사항은 퍼스널 로봇의 버튼기반 및 원격제어방식 설계, 휠 주행모드/보행모드/자동 주행모드/감시모드의 동작모드 설계, 원격제어기능 설계, 주변환경 변화감지 기능 설계, 모션데이터 추출기법 설계, 장애물 탐지기법 설계이다. 개발한 퍼스널 로봇은 언제 어디서나 원격지에서 인터넷과 접속하여 로봇의 동작 및 영상인식을 제어하여 주변 환경변화를 감지하는 이동체 감지 및 4가지의 변형이 가능하다. 또한 실험결과, 실내의 문턱이나 전선등으로 이루어진 지형의 요철을 다리 관절로 이동 가능하며, 자동 주행모드로 진행 할 경우 30cm*30cm 공간의 장애물 환경에서 3개의 적외선 센서를 이용하여 장애물을 성공적으로 벗어남을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.57-61
• /
• 2011

The bimodal tram was designed to drive on the dedicated track as well as on the public road. The position and speed are automatically controlled on the dedicated track by the onboard computer, whereas they are manually controlled by driver like motor vehicles on the public road. The ride comfort the passengers feel and the effect of the vibration generated during driving on the passenger's health, comfortableness and motion sickness were evaluated with driving the bimodal tram prototype in automatic and manual mode, respectively. The test was done in automatic mode on the test track with various load conditions while it was done in manual mode on the public road with empty load.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.911-914
• /
• 2004

This paper discusses on new two LCD technologies featured by the fast electro-optic response:one is polymer-stabilized FLCDs that exhibit V-shaped electro-optic (EO) switching called PSV-mode FLCDs with response time of 400 ${\mu}$ s; and the other is TN-mode LCDs that exhibit a frequency modulation response (called PM-TN LCDs)and a peculiar sensitivity to the high frequency component of driving voltage waveforms resulting in a short decay time constant of 5ms and an enhancement in the over-driving that yields short response time of 1ms between two gray levels.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.437-443
• /
• 1998

Automobile company tries to reduce the inertia of powertrain to increase the fuel efficiency and increase the engine power every year to make the high speed driving possible at full load condition. These cause the torsional vibration of powertrain. But the demand about ride comfort improvement is increased constantly, so torsional vibration of powertrain become an emergency problem to be cured. This study is a basic research to reduce the torsional vibration of powertrain at driving condition. First, the heavy duty powertrain is characterized as a vibrating system. Its natural frequencies and mode shapes are reviewed. Second, by comparison of simulation results and experiment results, validity of developed model is verified. Finally, the couterplan which can reduce the torsional vibration by mode analysis and parameter modification is suggested.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.123-127
• /
• 2004

Mode conversion type ultrasonic rotary motor using bolt tightened Langevin type vibrator was studied. Driving frequency of the motor, displacements and elliptical trajectories at tip of the coupler were simulated by finite element analysis program (ANSYS). Speed and torque of the fabricated motor were measured as functions of input voltage and load. As results, from FEA the driving frequency of 40.8[kHz] and useful elliptical trajectories were found. Fabricated motor rotated clockwise at frequency of 38.2[kHz]. Speed and torque of the motor were increased when the input voltage was increased. Maximum speed, torque and efficiency were 75[rpm], 0.14[Nm] and 6.28[％], respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.562-566
• /
• 2005

Toshiba Matsushita Display Technology (TMD) has firstly succeeded in mass production of OCB (Optically Compensated Bend) mode liquid crystal display panels which have excellent moving picture quality almost the same as CRT. We have newly developed 32 -inch diagonal HD ($1366{\times}768\;pixels$) panels using OCB mode and low temperature p-Si TFT (LTPS) array substrates. High performance of brightness of $600cd/m^2$ and contrast ratio of 600 : 1 was obtained by using pseudo-impulse driving method to insert a black period between continuous two frames, and also by using blinking backlight method. Furthermore, moving picture response time (MPRT) 6.5ms has been obtained by optimization of black insert driving and backlight blinking, without the great sacrifices of contrast ratio and luminance.