• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.1-12
• /
• 2009

Recently, as the importance of Economical Driving has been gradually growing up, the needs for research on automatic analysis of driving patterns that will ultimately provide drivers the methods for Economical Driving have been increasingly risen. Based on this purpose, we have executed two things in this paper. First, we have collected overall driving information such as date, distance, driving time, speed, idle time, sudden acceleration/deceleration count, and the amount of fuel consumption. Second, we have analyzed the influences of driving patterns on economical driving by employing the data mining techniques. These results can be applied in preventing bad driving patterns which will have consequently bad effects on Economical Driving in two aspects: by presenting some information on the terminal of the vehicles such as idle time, over-speed time, sudden acceleration/deceleration count continuously and by providing the drivers with alert information when the idle time ratio and the over-speed time ratio are excessive.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1036-1056
• /
• 2017

The rapid increase of ageing population and chronic disease patients cause high medical expenses, and it led an increased attention to digital healthcare. Smart car technologies for healthcare have been developing to recognize drivers' status and predict diverse driving environments. The present study aimed to understand the research trends of autonomous vehicle technologies of Korea and the United States through time series analysis, network analysis, visualization, and comparison between the two countries. The results suggest that cooperative study needs to be done in common research areas such as driver's safety and algorithms. It is also needed to conduct studies and benchmark about liking technique related to part-to-part and vehicle-to-vehicle as America's competitive advantaged area. In the US, diverse approaches of autonomous vehicle technologies have used to consider the characteristics of various age groups and passengers' health status through sensor, while in Korea, only one aspect, older drivers, is mentioned. Implications for the development direction of autonomous vehicle technologies with competitiveness in considering public health, ethics, and driver's safety and convenience are discussed in detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.36-46
• /
• 2011

At present, the number of local governments using the Traffic Information Center are increasing and drivers are utilizing its traffic information from VMS installed on roads in cities. However, the cases of the user's utility of VMS about urban roads with special characteristics different from expressways and urban highways haven't been evaluated so far. Because VMS is a medium installed from a budget to provide traffic information, it is necessary to evaluate and manage the efficiency of users. This study judged that the efficiency of the drivers using VMS of urban roads most influences the duty on alternative route information provision so that it established its evaluation criteria. In addition, it needs to raise its value by many drivers' observation of VMS. Therefore, in case of the same conditions, the installation location of VMS should be a road section with much traffic volume so its the evaluation criteria was established. At present, the study results can be utilized to raise the user's utility of VMS installed in the urban roads.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.165-172
• /
• 2008

The decisive factor for the popularization of telematics services in the future isn the ability to produce advanced service that match the needs of drivers and passengers. The Dedicated Short Range Communication(DSRC)-type of wireless communication system, which is being developed for the Intelligent Transport System(ITS), is one of the broadband wireless systems contributing to the improvement of driver and passenger needs, such as convenience, entertainment, comfort and safety. In this paper, the possibility of applying this system to the traffic information collection service will be explored. Further, a description of the service design for the traffic information collection system using electronic toll collection service will be provided, in the knowledge that the existence of information communication equipment mounted vehicles will remain.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.589-596
• /
• 2015

The purpose of this study was (1) to examine the present state of English education for the 2018 Pyeongchang Winter Olympics preparations, and (2) to identify the need for an English language training program for international sports events. With these goals in mind, the information was gathered from telephone interviews with educational administration officials who were responsible for international sporting events. For the survey, a total of twenty-six participants responded to a questionnaire designed to gauge their self-perceived English instructional needs for international sporting events. The principal results obtained from this study were: the Pyeongchang Organizing Committee for the 2018 Winter Olympic Games signed an agreement with an official supplier of language training services. In addition, Gangneung city is providing a 'Global Leaders' Academy' and English programs for taxi drivers and citizens. The result of the survey shows that the majority of participants reported that an English language training program is essential for international sporting events and it should be different from general English language education.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.320-327
• /
• 2016

We propose a multi-channel current-balancing single switch light-emitting diode (LED) driver for a 3D TV. Conventional LED drivers require non-isolated DC/DC converters as many as the number of LED channels, whereas the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simple structure with low cost and high efficiency. In particular, because its power switch can be turned off under the zero-current switching condition, the proposed driver has desirable advantages, such as improved electromagnetic interference characteristics and high efficiency. Moreover, it only uses a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. Therefore, the proposed driver exhibits high reliability and cost effectiveness. To confirm the validity of the proposed driver, we perform a theoretical analysis and present design considerations and experimental results obtained from a prototype that is applicable to a 46" LED TV.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.135-144
• /
• 1991

In recent years parking problems have been rapidly highlighted. Particularly on-street parking has become a very serious problem so an immediate action needs to be taken to resolve this problem. On-steet parking is attributable not only to insufficient capacity of parking lots but also to the facts that must of the parking lots are far away from the destinations to which drivers intend to go and that their locations are unclear. The effect of on-street parking is so great as to cause road traffic problems such as traffic jam and danger to road safety as well as to lead to obstructing business activities resulting in a decline of commercial areas. Therefore on-street parking is an important problem for a city as a whole. In this paper I have investigated a parking lot information and guiding system as one of the techniques to resolve the on-street parking problem and have clarified the effect of introducing this system and necessary conditions for implementing an optimum information and guiding system. Moreover I have pointed out the problems to be encountered in imp-lementing such system in areas not equipped with infrastructures taking into account the road conditions in these areas and have stated that it would be necessary to develop a new idea of information and guiding system in order to overcome these problems. I have suggested a Shot Gun Method as a proposal and have discussed extensibility of this method in the future.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.3
• /
• pp.243-266
• /
• 2015

This study does a case study of the electric-electronic cluster in Tamaulipas, Mexico. The purpose of this study is to investigate the development of industrial cluster in Mexico. The electric-electronics cluster in Tamaulipas, Mexico is MNC(Multinational Corporation) cluster. The number of MNC cluster increased after trade liberalization in Mexico. The result has demonstrated that the actual needs of maquila plants run by MNCs are the primary drivers for the formation and development of the cluster, which are related to education and human resource development. Overall, the electric-electronics cluster in Tamaulipas, Mexico is in its initial state, and the linkage between cluster members and local sectors such as Mexican suppliers is not strong. Finally, this study suggests the developmental ideas for the cluster.