• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.376-379
• /
• 2005

High efficiency and low cost sustain driver for plasma display panel (PDP) with current fed is proposed. Main concept of the proposed circuit is using the current source to charge and discharge panel. As a result, all power switches can achieve the zero voltage switching (ZVS) and every auxiliary switch can also do the zero current switching (ZCS). Moreover, since the inductor current can compensate the discharge current, the current stress of all power switches can be reduced considerably. Furthermore, it has features as a simpler structure, less mass, less cost, and lower electromagnetic interference than prior circuit.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.295-296
• /
• 2014

본 논문에서는 저 전압 스트레스 및 다채널 전류평형을 위한 Floating 전압 스택형 단일스위치 LED(Light Emitting Diode) 구동회로를 제안한다. 기존의 다채널 LED 구동회로는 LED 채널 수 만큼 boost converter가 필요하지만, 제안된 LED 구동회로는 단 하나의 buck converter와 n-1개의 balancing capacitor만을 필요로 한다. 기존 boost converter의 경우 모든 구성 요소는 LED 전압만큼의 높은 전압 스트레스를 갖지만 제안 회로의 경우 모든 구성 요소들은 기존 대비 절반 정도의 전압 스트레스를 갖는다. 또한 제안 LED 구동회로는 다채널의 LED 전류의 평형을 위하여 balancing capacitor만을 사용하기 때문에 높은 신뢰성과 비용의 효율성을 제공한다. 최종적으로 제안된 구동회로의 우수성과 이론적 분석의 타당성 검증을 위하여 46" 2채널 LED 구동회로를 위한 시작품을 제작하여 고찰된 실험결과를 제시한다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.3
• /
• pp.226-231
• /
• 2012

Autoparking assistant systems are a new and very promising area in automotive systems engineering. Since the traffic in modern cities becomes more intense, it is getting harder for a driver. Those systems are necessary for an inexperienced one to find a proper parking slot, or to park in a narrow parking slot without damaging his car or the vehicles around. The implementation of autoparking assistant systems may reduce drivers' stress and make parking generally more comfortable. In addition, such system can be extremely useful for senior or disabled people or for drivers with reduced mobility. The implementation of autoparking assistant systems may increase the safety of the parking, and therefore the development of such systems is a highly-demanded task. We introduce an intelligent autoparking system that automatically generates trajectory for parking using a fuzzy logic. This paper consists of three parts. In first part we introduce trajectory generation method for parallel parking without collisions. Fuzzy-logic based trajectory generation algorithm is described in second part. Experimental results presented in the third part of the paper prove effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.540-548
• /
• 2007

The parer proposes a power factor correction high efficiency PWM single-phase rectifier. Its good characteristics such as simple PWM control, low switch stress, and low VAR rating of commutation circuits make the proposed rectifier very suitable for various unidirectional power applications. In addition, the proposed rectifier consists of three boost-converter-type IGBT modules with the switching devices located at the bottom leg of the rectifier scheme, which also enables the use of the same power supply in both control and gate driver, thus resulting in simple control and power circuit structure. The detailed principle of operation and experimental results are also included. In particular, the design guide line is also suggested to make the circuit design of the proposed rectifier easy and fast.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.65-79
• /
• 2015

This study intended to investigate exploratorily the precedent factors affecting two types of perceived balances between work and life(family/leisure) and the antecedent ones affected by them, focusing on the metro train drivers. To attain this purpose, literature survey on the precedent factors, work-life balance, and antecedent factors was performed, and the study model was designed based on this survey, and then this model was analyzed empirically using Multiple-Regression. The results on the precedent factors showed that Job Demand, Self-Efficacy, and Age have significant effects on the negative transfer of work. On the other hand, it was shown that Affiliative Culture, Self-Efficacy, and Internal Locus of Control have significant effects on the family centered balance. And the results on the antecedent factors showed that family centered balance has significant effects on Job Satisfaction, Psychological Depression and Fatigue, Safety Behavior, and accident, and the negative transfer of work has significant effects on Physical and Psychological Depression and Fatigue, Emergency Stress, and Safety Behavior.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.11-18
• /
• 2018

An experimental study on the ultimate behaviors of the mild carbon steel (SPHC) fillet-welded connection is presented in this paper. Seven specimens were fabricated by the shielded metal arc welding (SMAW). All specimens failed by typical block shear fracture in the base metal of welded connections not weld metal. Block shear fracture observed in the base metal of welded connection is a combination of single tensile fracture transverse to the loading direction and two shear fractures longitudinal to the loading direction. Test strengths were compared with strength predictions by the current design equations and suggested equations by previous researchers. It is known that current design specifications (AISC2010 and KBC2016) and Oosterhof & Driver's equation underestimated overly the ultimate strength of the welded connection by on average 44%, 31%, respectively and prediction by Topkaya's equation was the closest to the test results. Consequently, modified equation is required to be proposed considering the stress triaxiality effect and material property difference on the block shear strength for base metal fracture in welded connections fabricated with mild carbon steel.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.107-116
• /
• 2021

This study aims to investigate the effect of multisensory stimulation on relieving the stress experienced by drivers. The photoplethysmograms (PPGs) of 30 healthy subjects were measured, and their subjective response to stressful situations and normal driving were evaluated. The subjects underwent nonstimulation and multisensory stimulation in stressful driving situations. Heart rate estimation from the PPG was collected via an ear-type sensor to reduce movement noise. The signals acquired were sampled at 200 Hz using BIOPAC PPG100C. Heart rate variability (HRV) was analyzed to compare the effect of multisensory stimulation on stress situations. In the multisensory stimulation, blue, green, and yellow were used for the visual sensory system; white, pink, and brown noises were used for the auditory sensory system; and lavender, lemon, and rosemary were used for the olfactory sensory system. No difference was observed in the subjective evaluation; however, the HRV results showed an increased HF (%) and decreased LF (%) and LF/HF (%) in the multisensory stimulation (e.g., green, pink noise, and rosemary) when compared to the nonstimulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.227-235
• /
• 2011

At present, the characteristics of drivers are not properly considered when informations are provided via VMS even though the Variable Message Signs(VMS) are one of the key information provision medias on the roads. In this study, the driver's psychological response(stress index) was evaluated using a driving simulator for the position of the VMS provided, the contents of the VMS provided, the size of characters on VMS, and types of VMS expression. It was appeared that the stress is the least when the position of the VMS provided 1.5km proceeded from exit, the contents of the VMS provided are time information and types of VMS expression are character form respectively and the size of characters on VMS is appeared not important. In addition, the change of the users' satisfaction level was measured when increasing the numbers of VMS on unit distance and the size of characters. The size of character was almost not effected in similar to the result of stress index and the satisfaction level increased when increasing the number of VMS on the unit distance. The results of this research can be utilized as basic data for the ITS system design and operation stages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.827-836
• /
• 2018

In this study, we developed a PC - based motorcycle simulator based on the development technology of a virtual patrol motorcycle training system. This simulator has been developed to be applied to a variety of fields such as driving training for beginners, driver factor research, and system development such as ABS, which can be seen in advanced models. The weight of the motorcycle operated by the patrol guards is more than 400Kg. There is a lot of risk due to the nature of work without prior practice. Therefore, we implemented a study on the untilization of physical stress and temporal pressure in emergency situations. In order to get a feeling that the motorcycle simulator is operating in real-life, it is important that the mutual reliable signal transmission and operation feel between the driver and the simulator. In order to achieve this, we developed a system that can apply the sub-systems of the actual vehicle to the motorcycle simulator in order to generate the same operation feeling as the actual vehicle. Based on these results, we have developed a method of generating a feedback queue.