• 패션비즈니스
• /
• 제15권1호
• /
• pp.63-79
• /
• 2011

This study examines the relationship between breast shape and brassiere construction through the comparative analysis of brassiere pattern on the breast shape. This researcher drew the brassiere pattern of developing a pre-study for Chinese female adults according to average size based on the four breast shapes. And then we measures brassiere pattern size and comparatively analyzes breast between size and shape. Comparative analysis results of brassiere patterns are verified differences of size and shape on the breast shape. Above all an angle of cup dart showed remarkable differences on the breast shape. An angle of cup dart isn't proportioned to breast size. An angle of cup dart for cone shape is bigger than dome shape. Because cone shape breast is protruded center part but dome shape breast have a shape of smooth curve like a half globe. So an angle of a cone shape breast cup dart is determined bigger than dome shape breast. For increasing the uplift effect of brassiere, brassiere pattern is different on the breast shape. And a brassiere pattern need different drawing methods about the angle of cup dart, breast inner side diameter, slope and so on. This study has an important significance that it established a mechanical relationship of breast shape and brassiere pattern.

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.67-80
• /
• 2002

An efficient torso pattern has been developed to cope with the future trend of order-based, individualized production like the E.C.(Electronic Commerce) in the apparel industry, and to make a database foundation of automatic garment pattern drafting. For this purpose, a non-contact three-dimensional anthropometric measurement system was used to provide a lot of accurate body data for better individual fit, and an automatic pattern drafting system that can easily generate various size patterns and construct a pattern database has been developed too. The subjects of this research were 18 to 24 year-old women whose data had been gathered through the Korean national investigation of anthropometry for industrial standards in 1997 and various body shapes were analyzed by the measurements. And a special software system has been developed to verify the validity of newly proposed drawing rules. The results of sensory evaluation for appearance and moving fitness of the new torso pattern showed a significant improvement in individual fit even for the figures with large deviation from standard shape compared with the results of the traditional one.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.75-84
• /
• 2019

The purpose of this study was to present a good pants pattern for boys aged 13-18 by comparing and analyzing the pants pattern according to lower body shape. And through it, this study was to provide basic data for pants production considering male student body shape. The pattern of this study used the industrial type Lee Hee-chun pattern and DC Suite Program for 3D virtual simulation. As a result of the appearance evaluation, there was a significant difference between the patterns in most items. Type 2 was rated highly, followed by Type 4, Type 3, and Type 1. Type 1 required correction of the length of the pants and the amount of crotch part, while type 3 required adjustment of the pants in the knee area. Type 4 required correction of pattern drawing method of crotch width, thigh circumference, and knee circumference. This pattern method was evaluated as suitable for slender body shape. This study suggests a pants pattern system suitable for adolescent boys by reflecting the body shape characteristics of adolescent boy with a change of body shape. It is expected that this will meet the increasing demand for fitting. In this study, we have examined 3D virtual simulation, not actual wear experiment, so it will be necessary to investigate the difference through actual clothing experiment for adolescent boys.

• 한국의류학회지
• /
• 제39권6호
• /
• pp.826-837
• /
• 2015

This study analyzes the shapes of the adjustment of a Napoleon Collar which combines a stand collar with an upper collar. It established experimental conditions for fixing the conditions of Napoleon Collar components (lapel width, stand collar size and upper collar size) as well as varied the shape of the neckline, the length of the curve of a stand collar and the size of the drawing space at the center back. It produced 22 test clothes of muslin, which were dressed on dress form No. 8. The results indicate that: 1. Neckline shape determines the amount of stand and fall. Less curved neckline stands higher against the neck and a more curved neckline is laid lower onto the body. 2. A shorter curve length of a stand collar allows a longer roll line to fall farther away from the neck with more space between the neck and collar. However, the longer the depth of curve of a stand collar creates a shorter roll line that stands high against neck and closer to neck without any space between the neck and collar with a collar line matching the neck of the dress form. 3. The smaller the drawing space at the center back creates a shorter the style line of the upper collar. However, a narrower back width of the collar creates a bigger drawing space at the center back with a longer the style line and a more naturally placed back width of the collar. 4. A Napoleon Collar creates a longer depth of curve for a stand collar and a smaller drawing space at the center back that is tightly and stably stuck to the neck.

• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1048-1059
• /
• 2003

This study focusses pattern draft and grading of jeans for women in their 20s, who consume jeans the most. Pattern was drafted based on existing patterns collected from companies. It is different from the existing educational patterns. It suggests new sizing system for twenties referring to sizes used companies and grading rule and method. he results were as follows; 1. Companies manufacture 2-8 sizes and they referred to the Korean Industrial Standards, KS K 0051, for their sizing system. 2. Drawing method for Pattern of the study had following measurements for each part: in the case of waist circumference, front part was W/4+1.5cm, back part was W14+2cm, front hip circumference was H/4-1.5cm, crotch line was the crotch length (practical measurement), hip circumference was (upper crotch line length)/5+0.5cm, front crotch part was 2.7cm, back crotch part was W/5+2.7cm, knee height was (the length of leg)/2+6cm and the circumference of knee and the tip of pants were 40cm. Through the wearing test on the subject of twenties, researched pattern received higher ratings, especially in appearance than the existing pattern. 3. 5 sizes system was made referred to the sizing system of companies and National Anthropometric Survey of Korean in 1997 Grading rule for 12 grading points of front part and 13 grading points of back part was suggested. Results of wearing test on the graded patterns showed high ratings similar to standard size.

• 한국BIM학회 논문집
• /
• 제11권4호
• /
• pp.42-52
• /
• 2021

Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.

• 패션비즈니스
• /
• 제14권6호
• /
• pp.146-169
• /
• 2010

For the purpose to develop the pattern of a tailored jacket for the Chinese adult women, a drawing method for the pattern of a tailored jacket was selected with the style of 'on&on', a young and casual brand of Beaucre Merchandising Co., Ltd. that has been successful in the China market, and then the measures to be applied were set up by properly combining the body measures such as the mean, mode and median of the entire group from data measured from women of 18 to 24 years old in Shanghai, China in 2008 and the mean body measures of the body type A of 2008 classified by GB/T 1335.2-1997. The pattern of a tailored jacket developed was verified for feasibility based on a wearing test and then revised for the parts with low jacket ability in general including the bust circumference, waist circumference, hip circumference, shoulder, waist back length and back area. The final measures applied for the development of a tailored jacket were 160-165cm for the height, the bust circumference of 87.7cm, waist circumference of 69.6cm and hip circumference of 92.8cm for a jacket.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.285-290
• /
• 2004

Sensors of Landsat detect different objects with different waves, so the range of water quality conditions can be accurately checked, and their images can be displayed in colors. The present study was conducted to measure the degree of clearness and depth and to detect elements from the surface water of Hwajinpo Lake. Based on these results, water quality of the lake was analyzed, and the range of water quality was drawn graphically. According to comparison outcomes, the new technique of detecting water elements from DN of Landsat TM images and drawing the range of water quality produced a far more accurate pattern for a wide area than the direct measurement. To display the pattern more clearly, the stretching technique in particular was very effective in the pattern analysis.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.