• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.65-75
• /
• 1993

PP에 PE를 용융혼합하여 방사불안정성을 줄일수 있는 방사조건에 대한 연구를 수 행하였다. 연신공명에 대한 주파수 분석결과 harmonic overtone이 나타나고 연식공명의 주 기가 체류시간에 비례함을 밝혔다. PP에 PE를 혼합시킴으로써 연신공명을 줄일수 있었으나 PE가 연속상이 되는 PE함유량에서는 임계연신비보다 낮은 연신비에서 사절이 발생하였다. 또한 낮은 방사온도에서는 melt fracture 현상이 연신공명을 쉽게 일어나게 하는 용인으로 작용하여 PP/PE 혼합물의 방사 안정성을 저해하였다, 토출량이 같을 때 방사구 지름은 연 신공명의 Dmax/Dmax 값에 영향을 미치지 않았고 방사길이가 짧으면 임계연신비가 증가하였 다. 방사구 L/D가 클때에는 방사구 L/D가 연신공명에 영향을 미치지 않았으나 방사구 L/D 가 짧을 때에는 임계연신비가 크게 저하되었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.63-68
• /
• 2020

In this study, we analyzed a cold draw (CD) bar packaging automation facility to examine its structural safety. The structural analysis focused on the frame part of the automatic packing machine for the CD round rod widely used in the industrial field, as well as the package supply device, banding suit, and crane part. As a result, we concluded that the structural safety for the banding suit, crane, and package supply device have been secured (safety factors of 9.8, 7.5, and 14.5, respectively). In addition, the safety factor of the transfer was 4.0.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.4
• /
• pp.350-354
• /
• 2014

Recently, high strength steel (HSS) sheet metal has been widely used to improve lightweight structures in the automotive industry. Because HSS sheets have high strength but low elongation, it is difficult both to make products with complex shapes and to control excessive springback. In order to reduce the springback after forming using HSS, draw beads were introduced in this study. The design variables, including the draw-bead positions and shapes, were optimized using a finite element analysis. A mold for a scanner support, which is part of an A3 printer, was designed using the proposed method and then utilized. The results from a finite element simulation and optimization were compared with the experiment results.

• International Journal of Railway
• /
• v.4 no.3
• /
• pp.64-69
• /
• 2011

Paris has one of the world's oldest metropolitan railway systems and was also a pioneer when it introduced the RER in the 70s. With planning objectives comparable to the GTX, the RER aimed at serving outer suburbs while fully crossing the city center at higher speeds than the Metro. Maybe more relevant is the comparison between the planned Grand Paris Express and GTX projects, in terms of their planning ambitions and their development framework. This article will introduce the main planning ideas behind the Metro and the RER in Paris, and try to draw relevant comparisons with the GTX plan. It will also present the plans and financing framework for the Grand Paris Express and compare it with the BTO scheme contemplated for GTX, and draw some recommendations for successful implementation.

• School Mathematics
• /
• v.4 no.1
• /
• pp.1-13
• /
• 2002

The purpose of this study is to investigate the reasons and backgrounds of drawing auxiliary lines in the proof of geometry. In most of proofs in geometry, drawing auxiliary lines provide important clues, thus they play a key role in deductive proof. However, many student tend to have difficulties of drawing auxiliary lines because there seems to be no general rule to produce auxiliary lines. To alleviate such difficulties, informal activities need to be encouraged prior to draw auxiliary lines in rigorous deductive proof. Informal activities are considered to be contrasting to deductive proof, but at the same time they are connected to deductive proof because each in formal activity can be mathematically represented. For example, the informal activities such as fliping and superimposing can be mathematically translated into bisecting line and congruence. To elaborate this idea, some examples from the middle school mathematics were chosen to corroborate the relation between informal activities and deductive proof. This attempt could be a stepping stone to the discussion of how to teach auxiliary lines and deductive reasoning.

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.91-100
• /
• 2001

A sectional FEA program is developed lot analyzing forming processes of sandwich sheets, which are intensively used recently as a lightweight material of an automobile body. The aluminum sandwich sheet consists of two aluminum skins and a polyprophylen core in between. The aluminum sandwich sheet is dominantly effected by the bending effects in small radius of curvature, so that an appropriate description of bending effects is required to analyze the forming processes. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the curvature of the tool and are added to the membrane stretch forces. To verify the validity of the developed program the sectional FEA results in stretch/draw forming Processes of a square cup and draw forming Processes of an outer hood panel were compared with the measurements.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.32-35
• /
• 1998

The material properties and forrnabilities of tailored blanks are evaluated by experimental tests. In the tensile test, the gradient of strength coefficients of the heat affected zone associated with the welded line width represents the quality of a welded part. In the hemispherical dome punching test, the plane strain state of the welded line is observed. In the squared cupping test, the thin side is stretched more than the thick side in the stretch mode, while both sides are similarly stretched in the draw mode. In the 2D draw test, FLCo is measured in a simple manner and the forming defects of the tailored blanks with the same thickness are found.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.53-57
• /
• 1998

In order to investigate the effects of the variables during the stamping process upon the side wall curl behavior, experiments and finite element analyses were done using a 90 degree draw-bending test. The variables considered were the die radius, the forming speed, the restraint force, the lubrication and the sheet grade. The experiments and simulation conditions were selected according to the design of experiment (DOE) approach. The effects of the restraint force, the lubrication and the forming speed were the same for both high strength and mild steels, but the effects of the die radius on the side wall curl were dependent on the magnitude of the die radius and the sheet grade. A straight side wall was observed for both high strength and mild steels when the die radius was about 2∼3 times of the sheet thickness. It was recommended that the restraint force, the forming speed and the friction be increased in order to reduce the side wall curl.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.110-110
• /
• 2001

본 논문에서는 공간 히스토그램과 웨이브렛 모멘트를 융합하여 검색 효율을 크게 향상시키는 방법을 제안한다. 이 방법에서는 질의영상과 DB영상간의 유사도를 구할 때 히스토그램의 유사도와 웨이브렛 모멘트의 유사도를 효과적으로 융합한다. 즉, 공간적 이동, 회전 등에 강한 히스토그램 특징과 주파수 대역별로 구해지는 웨이브렛 모멘트 특징을 잘 융합함으로써 검색성능의 향상을 추구한다. 제안한 방법의 성능을 평가하기 위한 시험영상 DB로는 Brodatz 질간 영상 DB와 Corel Draw Photo 영상 DB를 사용하였다. 실험 결과, 제안한 방법으로 구한 검색율이 Brodatz DB에서 히스토그램이나 웨이브렛 모멘트만으로 구한 검색율보다 각각 5.3%와 13.8% 향상되었고, Corel Draw Photo DB에서는 각각 15.5%와 3.2% 향상됨을 확인할 수 있었다.

• Journal of Korean Home Economics Education Association
• /
• v.4 no.1
• /
• pp.1-15
• /
• 1992

The aim of the research is to develop a PC based courseware which is programed to drafts clothing patterns. The pattern making are numerically formulized. The of the program were as follows；1. Menu and instructions are displayed in Korean Language. 2. Easy step-by-step instructions explaining how to draw basic pattern and design pattern. 3. Low cost personal computer and general purpose printer are used. The source program was written in C-language and compiled using Turbop C. The Bezier spline is used to draw curves of pattern and to display Korean characters and pattern on same screen simultaneoulsy, Korean characters are drawn graphically. The low cost IBM Personal Computer or compatibles with Hercules Graphic Card is required to run this grogram.