본 논문에서는 UiO-66 입자를 합성하고, 이를 열가소성 탄성중합체인 polystyrene-block-polybutadiene-block-polystyrene (SBS) 블록공중합체 매질에 삽입하는 방식으로 CO2/N2 기체를 분리하기 위한 혼합 매질 분리막을 제조하였다. UiO-66가 고분자 매질에서 미치는 영향을 확인하기 위해 SBS와 UiO-66의 질량 비율을 변화시켜가며 혼합 매질 분리막을 제조하였다. 또한 UiO-66 입자의 균일한 분산을 위해서 두 차례에 걸친 초음파 처리 및 자성 막대를 이용한 물리적 혼합을 활용하였다. 제조된 시료들은 푸리에 변환 적외분광법(FT-IR), 주사전자현미경(SEM)을 통해 확인하였다. 또한 기체 투과 성능은 time-lag method를 통해 확인하였다. 이때, UiO-66의 함유량이 증가함에 따라 혼합 매질 분리막의 투과도는 크게 증가하였지만, CO2/N2 선택도는 크게 감소하지 않았다. 가장 좋은 성능을 보인 20%의 UiO-66 입자를 함유한 분리막의 경우 663.8 barrer의 CO2 투과도와 13.3의 CO2/N2 선택도를 보여주었다. 이러한 결과는 Robeson plot에서 순수 고분자 막에 비해 upper bound에 더 가까운 성능을 나타냈는데, 첨가된 UiO-66가 선택도를 크게 희생시키지 않고 기체 투과도는 두 배 이상 향상시켰기 때문이다.
Commercial ductile iron was coated with titanium and aluminum powders by low pressure plasma spraying and then irradiated with a $CO_2$ laser to produce anti-corrosive TiC composite layer. TiC carbides were precipitated homogeneously in a laser alloyed layer by in-situ reaction between carbon existed in the base metal and titanium with thermal sprayed coating. The formation of gas pores and brittle limited mixing zone with ledeburite microstructure in TiC composite layer were surpressed by the complementary alloying of aluminum. The hardness of TiC composite layer obtained by addition of titanium and aluminum was between 600 and 660 Hv, which was three times as high as the hardness of ferritic ductile iron. From the results of isothermal oxidation at 1123k for 24 hours in air, high temperature oxidation resistance of the TiC composite layer with aluminum was improved and doubled when compared with the TiC composite layer without aluminum.
In this study, magnetic properties of anodized Al film deposited with ferro-magnetic metals in the capacity of perpendicular magnetic recording media were measured and evaluated to find out the role of structure and morphology of the oxide films on magnetic characteristics. The object of this work was to present the conditions of magnetic thin film formation with more superior magnetic property. Anodizing was carried out under various conditions, and then the anodized film were electro-deposited with Co, Ni, Fe and their alloys. Coercive force and residual magnetization in perpendicular direction increased as the pore length of anodized film increased. It was attributed to the increase of the amount of depoisted metals and the ratio of length/diameter of pores. Morphology of anodized films in phosperic acid was not similar to that of sulfuric acid, and thin films in the former solution had perpendcular magnetic anisostropy because of large diameter, irregular length and distribution of the pores. It was found that magnetic properties of the thin films, which had doubled layer of two metals, were dominated by the metal electrodeposited on the surface of the anodized oxide films.
Recently, food-induced allergies have emerged as major global concerns. In the past ten years, it has doubled in western nations, and it has also increased in Asia and Africa. In many cases of food allergy, peanut allergy is prevalent, typically permanent, and frequently life-threatening. Therefore, we utilized gene editing techniques on the three major allergen genes in peanuts, Ara h 1, Ara h 2, and Ara h 3. Using gibson assembly and golden gate assembly, we created two vectors, the gRNA-tRNA array CRISPR-Cas9 system and Prime-editing. Using LBA4404 strain and agrobacterium-mediated transformation, the vectors were transferred to two elite Korean peanut lines. After co-cultivation and tissue culture, we extracted the tissue cultured peanut DNA amplified the hygromycin resistance gene and Cas9 gene in the T-DNA region. The integration of the T-DNA region into the host genome was demonstrated by the presence of a specific band in some samples. There have only been a few reported peanut gene editing studies. So, this study will contribute to peanut allergy and gene editing research.
Recently, food-induced allergies have emerged as major global concerns. In the past ten years, it has doubled in western nations, and it has also increased in Asia and Africa. In many cases of food allergy, peanut allergy is prevalent, typically permanent, and frequently life-threatening. Therefore, we utilized gene editing techniques on the three major allergen genes in peanuts, Ara h 1, Ara h 2, and Ara h 3. Using gibson assembly and golden gate assembly, we created two vectors, the gRNA-tRNA array CRISPR-Cas9 system and Prime-editing. Using LBA4404 strain and agrobacterium-mediated transformation, the vectors were transferred to two elite Korean peanut lines. After co-cultivation and tissue culture, we extracted the tissue cultured peanut DNA amplified the hygromycin resistance gene and Cas9 gene in the T-DNA region. The integration of the T-DNA region into the host genome was demonstrated by the presence of a specific band in some samples. There have only been a few reported peanut gene editing studies. So, this study will contribute to peanut allergy and gene editing research.
리튬이온전지의 대형화와 범용화에 따라 경제성과 안정성 관점에서 정극재료의 개발은 중요한 과제로 대두되고 있다. 18650 원통형 전지의 에너지 밀도는 발매 초기인 1991년 230Wh/l에서 2005년 2배 이상의 500Wh/l로 증가하였으며, 제품 대부분의 에너지용량은 450~500 Wh/l, 150~190Wh/kg이고 안전성, 제조비 절감 및 장 수명을 중점적으로 개발하고 있다. $LiCoO_2$ 정극활물질 중의 Co가 고가이므로 Co 사용량을 줄이면서 에너지 용량을 향상시키기 위하여 $LiMn_2O_4$, $LiCo_{1/3}N_{i1/3}Mn_{1/3}O_2$, $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$, $LiFePO_4$-C복합체 (167 mA/g)등이 개발되고 있다. 전동자전거용 전지는 출력밀도 500 Wh/kg, 전동공구용 1,500Wh/kg, EV나 PHEV용으로는 4,000~5,000Wh/kg의 대용량 출력밀도를 요구하고 있으므로 배터리 소재의 성능을 향상시키려고 많은 연구가 진행되고 있다. 최근 Graphene-sulfur 복합체정극활물질 600 Ah/kg, 2차전지용 분자클러스터(molecular cluster) 320 Ah/kg 등의 새로운 정극활물질이 연구 개발되고 있으므로 실용화가 기대된다.
This study is to develop the double capsulation technology in order to increase the conservativeness and stability of unstable materials such as vitamins, polyphenols, natural active ingredients. And also, best way of triple matrix capsulation using natural polymers were detail described. As the first capsulation with w/o/w (water-in-oil-in-water) emulsifying system, our study group was especially made to soft and moisture cream using 5wt% of sucrose ester emulsifier as first capsulation. Nutrient agents are squalane, camellia oil. Triple matrix capsulation was formed with the best stabilized bead type capsules when it blended of chitosan, algin, sodium-potassium alginate. The bead diameter size was about 2.0~4.5mm (mean diameter: 3.2mm). Activity of lactobacillus containing cream for depending on various pH variations showed that alkalinity ($pH=10.8{\pm}0.5$) condition was higher than acidity ($pH=4.2{\pm}0.2$) and neutrality ($pH=7.1{\pm}0.3$) conditions. After a month, it also was certified to the activity of lactobacillus in incubated at $37{\pm}1^{\circ}C$ in culture medium. As application of food industry, we developed the containing lactobacillus capsule and 7 colored kinds of double and triple matrix capsulation in yogurt cream and active ingredients. As for above mentioned those results, one of tool to stabilize the living lactobacillus, doubled matrix capsulation greatly be expected to contribute to food industry. Furthermore, it can be expected to apply the drug delivery system (DDS) to active ingredients of stabilizing technologies at drug, pharmaceutical division and cosmetic industry, etc.
Photonic crystal solar cells have the potential for addressing the disparate length scales in polymer photovoltaic materials, thereby confronting the major challenge in solar cell technology: efficiency. One must achieve simultaneously an efficient absorption of photons with effective carrier extraction. Unfortunately the two processes have opposing requirements. Efficient absorption of light calls for thicker PV active layers whereas carrier transport always benefits from thinner ones, and this dichotomy is at the heart of an efficiency/cost conundrum that has kept solar energy expensive relative to fossil fuels. This dichotomy persists over the entire solar spectrum but increasingly so near a semiconductor's band edge where absorption is weak. We report a 2-D, photonic crystal morphology that enhances the efficiency of organic photovoltaic cells relative to conventional planar cells. The morphology is developed by patterning an organic photoactive bulk heterojunction blend of Poly(3-(2-methyl-2-hexylcarboxylate) thiophene-co-thiophene) and PCBM via PRINT, a nano-embossing method that lends itself to large area fabrication of nanostructures. The photonic crystal cell morphology increases photocurrents generally, and particularly through the excitation of resonant modes near the band edge of the organic PV material. The device performance of the photonic crystal cell showed a nearly doubled increase in efficiency relative to conventional planar cell designs. Photonic crystals can also enhance performance of other optoelectronic devices including organic laser.
초연자성을 띠는 코네틱(Conetic; NiFeCuMo) 박막을 상호 중간층으로 강자성체인 CoFe 또는 NiFe 박막 사이에 삽입한 코닝 유리(Corning glass)/Ta(5 nm)/[CoFe or NiFe(5 nm-t/2)]/NiFeCuMo(t = 0, 4, 6, 8, 10 nm)/[CoFe or NiFe(5 nm-t/2)]/Ta(5 nm) 3층 박막구조에 대한 자기적 특성을 조사하였다. CoFe와 NiFe 박막의 자기적 특성은 박막의 두께에 따라 크게 결정되므로 자화 곤란축과 자화 용이축으로 측정된 이방성 자기저항 곡선으로부터 얻은 보자력과 자화율을 각각 비교하였다. 특히 3층 박막구조에서 NiFe 박막 사이에 자유층으로 NiFeCuMo 박막을 삽입하면 높은 자기저항비를 유지하면서 향상된 자장감응도를 유지하는 고감도 바이오센서용 거대자기저항-스핀밸브(giant magnetoresistive-spin valves; GMR-SV) 및 자기터널접합(magnetic tunnel junction; MTJ) 소자로 활용할 수 있다.
국제기후변화협약 및 정부의 저탄소 정책은 기본적으로 과학이 제시한 이산화탄소 증가에 대한 기후민감도에 근거해야 한다. 그러나 기후민감도의 추정치는 현재까지 연구 단위별로 차이가 커서, 이에 대한 과학적 배경, 한계, 전망을 고찰할 필요가 있다. 본 연구에서는 지금까지의 기후민감도에 대한 국내외 연구 결과를 객관적으로 종합하여 검토한다. 기후민감도를 결정하는 것은 대기와 지면의 각종 물리과정에 의한 기후피드백 작용이며, 이 중 특히 태양 단파복사량을 조절하는 구름, 해빙과 관련된 물리과정은 불확실성이 가장 커서, 부정확한 민감도 추정을 야기하는 것으로 보인다. 이 때문에, 최근 인공위성 자료를 이용하여 추정한 기후민감도는 기후모델들이 갖는 범위(대기 중 이산화탄소 2배 증가당 지구평균기온 2-5 K 증가)에 들거나, 그보다 훨씬 작은 값을 갖는다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.