• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.45-54
• /
• 2003

For cooling of double effect absorption heat pump system of solar heating source, analysis of thermodynamic design data has been done to find the property of Libr-water + ethylene Glycol mixture for working fluid by computer simulation. Derived thermodynamic design data, enthalpy based coefficient of performance and flow ratio for possible combinations of operating temperature for water - LiBr and Ethylene Glycol mixture ($H_2O$ : CHO ratio 10:1 by mole) by computer simulation are done. The obtained results, COP and mass flow ratio of the water - lithium bromide - ethylene glycol system, are compared with data for the water-Libr pair solution.

• Membrane and Water Treatment
• /
• 제2권2호
• /
• pp.75-89
• /
• 2011

The predicting equations for mass transfer rate in cross-flow rectangular dialyzers with double flow and recycle, have been derived by mass balances. The recycling operation has two conflicting effects. One is the desirable effect of the increase in fluid velocity, resulting in an increased mass transfer coefficient. The other is the undesirable effect of the reduction in concentration difference due to remixing, resulting in decreased mass-transfer driving force. In contrast a single-pass device without recycling, considerable improvement in mass transfer is achieved if the cross-flow rectangular dialyzer of same size is operated with double pass and external recycling. It is concluded that recycle can enhance mass transfer, especially for larger reflux ratio.

• Steel and Composite Structures
• /
• 제8권4호
• /
• pp.297-312
• /
• 2008

A concrete filled double skin tubular (called CFDST in abbreviation) member consists of two concentric circular steel tubes and filled concrete between them. Purpose of this study is to investigate their bending characteristics experimentally. The two test parameters of the tubes considered were an inner-to-outer diameter ratio and a thickness-diameter ratio. As a result, their observed failure modes were controlled by tensile cracking or local buckling of the outer tube. Discussion is focused on the confinement effect on the filled concrete due to the both tubes and also the influence of the inner-to-outer diameter ratios on their deformability and load carrying capacity.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.514-519
• /
• 2015

본 논문에서는 이중 게이트 junctionless MOSFET 의 성능 최적화를 위하여 다중 게이트 형태를 적용하여 평가한다. 금속 게이트들 사이의 일함수가 서로 다르므로 다중 게이트 구조를 적용할 경우 금속게이트 길이에 따라 소스와 드레인 주변의 전위를 조절할 수 있다. 동작 전류와 누설 전류 그리고 동작 전압은 게이트 구조에 의해 조절이 가능하며 이로 인한 동작 특성 최적화가 가능하다. 본 연구에서는 반도체 소자 시뮬레이션을 통하여 junctionless MOSFET 의 최적화를 구현하고 분석하는 연구를 수행 한다.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.60-63
• /
• 2003

For the increase the charge stability of teflon electrets for used at uncomfortable industrial circumstances with high temperature or humidity, We made an investigation into double layer effect of teflon electrets. Teflon AF film was spincoated on FEP film and then the charge storage property of AF/FEP dual film was investigated to be compared with FEP film. It was found that the AF/FEP dual film has higher surface potential than FEP film on the repeated charging and annealing process. It seems that AF/FEP dual film has higher thermal stability than FEP film through TSC measurement. If the investigations of the double layer effect of Teflon film carried out more closely with it's molecular structures and surface conditions, it may be effectively improved the stability of charge storage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.192-198
• /
• 2017

In this paper, we propose a novel double gate vertical channel tunneling field effect transistor (DVTFET) with a dielectric sidewall and optimization characteristics. The dielectric sidewall is applied to the gate region to reduced ambipolar voltage ($V_{amb}$) and double gate structure is applied to improve on-current ($I_{ON}$) and subthreshold swing (SS). We discussed the fin width ($W_S$), body doping concentration, sidewall width ($W_{side}$), drain and gate underlap distance ($X_d$), source doping distance ($X_S$) and pocket doping length ($X_P$) of DVTFET. Each of device performance is investigated with various device parameter variations. To maximize device performance, we apply the optimum values obtained in the above discussion of a optimization simulation. The optimum results are steep SS of 32.6 mV/dec, high $I_{ON}$ of $1.2{\times}10^{-3}A/{\mu}m$ and low $V_{amb}$ of -2.0 V.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.461-472
• /
• 2015

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권2호
• /
• pp.197-202
• /
• 2003

The hot climatic conditions prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids throughout the year, In order to select efficiently the breeds with high temperature tolerance, it is very important to analyze critically the impact of high temperature on many silk yielding attributes of silkworm races. Keeping the above in view, the present study was undertaken to determine the effect of high temperature $(36 {\pm} 1^{\circ}C)$ and high humidity $(80 {\pm} 5% Relative Humidity)$ on the rearing performance of pure races, foundation crosses, single hybrids and double hybrids of bivoltine silkworm, Bombyx mori L. The robust bivoltine breeds, CSR18, CSR19, 8HT and 5HT, eight foundation crosses, eight single hybrids and eight double hybrids involving these breeds were chosen as materials in this study.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.13-17
• /
• 2006

The elasto-plastic finite element method (FEM) was used to investigate the effect of off-center recessing location (8 mm length) on the stress distribution in the lap zone of adhesively bonded aluminium double lap joint. The results from simulation showed that the effect of off-cent recessing in bondline of double lap joint in the mid-bondline is not evidently to stress distribution in mid-bondline but the peak stresses both in mid-bondline and in the interface near the adherend side of the joint may increase markedly when an 8 mm length recessing was arranged symmetrical to the point of x =18 mm. When shifting an 8 mm length recess from near left end to the right end of the lap zone, all the highest peak stresses in the mid-bondline occurred under the condition of recess arranged symmetrical to the point of x = 6 mm.

• 대한의생명과학회지
• /
• 제11권2호
• /
• pp.243-248
• /
• 2005

The present study was conducted to determine whether skin spread of Myrrha and Tending Diancibo Pu (TDP) irradiation have a remarkable effect on the cell regeneration as well as wound healing following dermal scald burn injury. Burn injury was induced on dorsal surface $(TBSA\;15\~20\%)$ by scald burn in rats. Postburn concentration of serum protein was significantly decreased compared with sham-treated, double treatment with Myrrha and TDP was significantly increased the protein concentration compared with that of burn control. The content of keratinocyte growth factor (KGF) at 48 h is higher than that of at 24 h, and double treatment with Myrrha and TDP was the most effective to increase the production of KGF in all experimental groups. Morphologically, epithelial regeneration and dermal collagen synthesis by fibroblasts were accelerated in Myrrha and TDP treated group compared with bum control at same time postburn. At 48 h after burn, all dermal connective tissues are recovered to new collagen fibers in case of Myrrha and TDP double treated group. The data suggest that double treatment with skin spread of Myrrha and TDP radiation have a remarkable effect of to accelerate cell regeneration and wound healing in case of scald burn skin.