• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1050-1057
• /
• 2015

This paper presents the characteristics of broadband double-cone antennas. The antenna is used to measure electromagnetic fields(2~5 GHz) radiated from a primary or a secondary electrode of a pole-transformer when partial discharge occurs inside the pole-transformer. The theoretical analysis is conducted using commercial software based on a finite difference time domain(FDTD) method. The parameters are a radius, and a height of the broadband double-cone antennas, and the number of posts on a ground plane. This paper examines influences of structural parameters of the broadband double-cone antennas on return loss. The results show that a condition for an optimum structure of broadband double-cone antennas exists. It also shows that the broadband double-cone antennas have radiation patterns similar to those of a dipole antenna. Therefore the broadband double-cone antennas are appropriate for the measurement of radiated electromagnetic fields from the pole-transformer. To verify the theoretical analysis, computed results are compared to experimental results.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.108-111
• /
• 2004

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.9-19
• /
• 1988

The threshing of head-feed combine may be accomplished mainly by the action of impact between threshing teeth and rice. In this study, it was attempted to assess threshing performance characteristics of head-feed threshing teeth. And the characteristics of threshing teeth will be applied to the method which could analyze the time and order of impact between teeth and the rice, which was used as a basis for predicting the threshing performance and determining the optimum design parameters. The results of the study are summarized as follows: 1. About 50% of threshed material were threshed by the beginning 7 impacts on the rice bundle. Threshing torque decreased until 25 impacts and did not change thereafter. 2. There was significant difference in the threshability according to the shape of threshing teeth. The triangular-shaped tooth was the most efficient in threshability ratio and the semicircle-shaped tooth was the lowest. There was no significant difference in specific energy requirement for the varied teeth design. Torn-head ratio being generated by the semicircle-shaped and the triangular-shaped teeth in series was less than that by a single tooth with the triangular-shaped and the double setting of the triangular-shaped. Chaff generation ratio by the triangular-shaped and the semicircle-shaped teeth was less than the others tried. 3. The triangular-shaped teeth in series, which was newly designed for this study, showed an intermediate characteristics between the double setting of the triangular-shaped and the semicircle- shaped teeth. Threshability ratio of the triangular-shaped teeth in series was higher than that of the semicircle and lower than the double setting of the triangular-shaped tooth. Torn-head generation ratio for it was about same as that of the semicircle. Chaff being generated by the triangular-shaped teeth in series was about same as the double setting of the triangular-shaped teeth. 4. About 40% of threshed grains which passed through concave were concentrated under the threshing tooth and the rest of grains displayed a skew distribution toward the inlet of threshing chamber.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.53-58
• /
• 2008

New dyeable PP fiber and several products from it has been developed through dispersing polyester copolymer into PP resin by a Korean synthetic fiber manufacturer and its colleagues. The dyeing properties of PET/dyeable PP double knit fabric were examined with three different types of disperse dye in this study. It was found that the disperse dye, exhausted on dyeable PP at early stage of dyeing, migrated to PET at elevated dyeing temperature when two fibers were dyed in the same dye bath. The ratios of dye distribution between two substrates dyed at $120^{\circ}C$ and $130^{\circ}C$ showed no difference. S type disperse dyes showed good build-up properties and acceptable color fastness while high light fastness type exhibited the lowest amounts of exhaustion but excellent color fastness. It might be concluded that the most appropriate dye for PET/dyeable PP double knit fabric was S type, and that some color difference between PET side and dyeable PP side was unvoidable.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.43-50
• /
• 2006

A Double Facade System(DFS) is well known as an innovative solution of ecological facade in the west european countries. There are more than 200 various realized DFS in Germany. At the same time, the korean engineers have researched to find out the physical advantages of DFS in the moderate korean climate, which has a very humid summer with high temperature and a dry winter with low temperature. For example, the monthly mean temperature in Korea comes up to 28K, while that in Germany comes up to only 19K. That is, why a other solution of DFS is needed in Korea. This study has experimented the physical performance of the natural ventilation in the heating period. The preheating function of the cold air by DFS can improve no doubt the performance of the natural ventilation at the cold season as well as spring and autumn. The physical difference between single and double facade on natural ventilation has been tested at the newly constructed laboratory, which can turn $360^{\circ}$ to confirm the characteristic of a facade with the various directions. The results show the natural ventilation of the DFS has definitely much more comfortable than that of the single facade system. The air velocity of the inflow as well as the air temperature in the DFS provide a more stable condition than in the SFS. The theoretical limit(air velocity max 0.2m/s, air temperature min. $18^{\circ}C$, temperature difference between 100mm and 1700mm height max. 3K) on the indoor comfortableness doesn't go over in the DFS. On the other hand, the SFS showed an unstable condition with an excess of comfortableness limit on air velocity as well as temperature. In view of the researching results so far achieved, the research came to a conclusion, that the DFS can provide a more comfortable indoor condition by the preheating in the heating period than a SFS, and the period of natural ventilation in winter time could be definitely increased at the DFS.

• 한국사회정책
• /
• v.24 no.4
• /
• pp.31-62
• /
• 2017

This study intends to identify the difference of socio-economic characters and housing welfare needs between housing poverty types and to know the independent effects of variables on the housing poverty types. It was revealed that the double housing poverty household, housing below facility standard, unaffordable housing with low income, housing below structure performance environment standard, housing below area standard and housing below room standard should be supported one by one. And the variables related with the housing poverty types are different Suggestions were made for housing welfare policy for the double housing poverty, the control for rental housing market, the policy considering income level for unaffordable housing, the housing policy for the disable household.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.550-557
• /
• 2001

There are several applications and error analysis methods using GPS(Global Positioning System) In most analysis positioning and timing errors are represented as the multiplication of DOP(Dilution Of Precision) and measurement errors, which are affected by the receiver and measurement type. Therefore, lots of DOPs are defined and used to analyze and predict the performance of positioning and timing systems. In this paper, the relationships between these DOPs are investigated in detail, The relationships between GDOP(Geometric DOP), PDOP(Position DOP) and TDOP(Time DOP) in the absolute positioning are de-rived. Using these relationships, the affect of clock bias is analyzed. The relationships between RGDOP(Relative DOP) and PDOP are also derived in relative positioning where the single difference and double dif-ference techniques are used. From the results, it is expected that using the common clock will give better performance when the single difference technique is used while the effects of clock is eliminate when the double difference technique is used. Finally, the error analyses of dual frequency receivers show that the narrow lane measurements give more accurate results than wide line of or L1. L2 independent measurements.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.181-186
• /
• 2001

During the growth of fruit vegetables such as pepper, cucumber and tomato, there are light deficiency under the plant canopy. This study was conducted to clarify the effect of light diffusion film on the stem growth, canopy, flowering and fruiting of green pepper in greenhouse. The transmittance of total solar radiation into greenhouse under woven and double films were 90% and 75% of polyethylene film. And the transmittance of photosynthetically active radiation into greenhouse under woven and double films were 96% and 81% of polyethylene film. However, the light diffusions under woven, double and polyethylene films were 46%, 31% and 9%, respectively. The plant height under polyethylene film covered greenhouse was 96.9% cm, taller than those under woven and double films by 6.5, 13.9 cm. And the third node length under woven film covered greenhouse was 8.6 cm, shorter than those under double and polyethylene films by 2.5, 5.7 cm. Also the first branch angle under woven film covered greenhouse was 61.0$^{\circ}$, larger than those under double and polyethylene films by 2.3, 10.3$^{\circ}$. But there was no clear difference in the node numbers among the covering materials. The rate of curved and sterile fruit under woven film covered greenhouse was smaller than those under double and polyethylene films by 4.6, 5.5% and 1.2, 3.6%. But the contents of vitamin C showed no difference among the covering materials and plant densities.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.355-363
• /
• 2022

Purpose : The purpose of this study was to investigate the double mediating effect of ego-resilience and impulsivity in the effects of smartphone addiction on depression among office workers. Research design, data and methodology : The subjects of this study were office workers working in four cities: Seoul, Daejeon, Chungnam, and Chungbuk Province, and the total number of respondents was 286. Descriptive statistics, difference test (t-test, ANOVA), correlation analysis, and double-mediated effect analysis were used for statistics. Results : The results of this study are as follows. First, as a result of the difference analysis, there was no difference in depression according to the general characteristics of the subjects of this study, such as gender, age, marital status, and salary. Second, as a result of correlation analysis, smartphone addiction showed a negative correlation with ego-resilience, and a positive correlation with impulsivity and depression. Also, ego-resilience showed negative correlation with impulsivity and depression. Impulsivity showed a positive correlation with depression. Third, as a result of dual mediating effect analysis, it was found that ego-resilience and impulsivity played double-mediated role between smartphone addiction and depression. Conclusions : Based on the results of this study, theoretical measures centered on ego-resilience were discussed and presented in order to positively induce the decrease in impulsivity and depression due to smartphone addiction among office workers.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.2
• /
• pp.1-7
• /
• 2006

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA0015 Wells turbine. The five double flaps which have 0.5% difference were selected. A Navier-Stokes code, CFX-TASCflow, was used to calculate the flow field of the Wells turbine. The basic feature of the Wells turbine is that even though the cyclic airflow produces oscillating axial forces on the airfoil blades, the tangential force on the rotor is always in the same direction. Geometry used to define the three dimension numerical grid is based upon that of an experimental test rig. This paper tries to disign the double flap of Wells turbine with the numerical analysis.