• Korean Journal of Veterinary Research
• /
• v.48 no.3
• /
• pp.311-316
• /
• 2008

A 7-year-old female Shih Tzu dog with lots of masses in the whole mammary gland was presented to the surgery department of the Veterinary Teaching Hospital in the Cheju National University. After surgical excision, all mammary samples were referred to Pathology Department of Veterinary Medicine. Grossly, masses were measuring up to $6.5{\times}4{\times}1cm$ and on cut surface of masses in right 1st, 3rd, 4th, 5th and left 1st, 3rd, 4th, 5th mammary masses were well delineated and firm, sulphur yellow, solid round to oval shape. Microscopically, most neoplastic sweat glands were severely proliferated in dermis and subcutis. Most tubules were lined by round to oval shaped epithelium with eosinophilic cytoplasm, hyperchromatic nuclei with high mitotic figures and severe central necrosis. The neoplastic epithelium also had PAS-positive diastase-resistant cytoplasmic granules, but negative with Perls iron stain. The left 2nd mass was well delineated, and had several dark brown areas and yellowish white glittered areas. Mass was well circumscribed with dense connective tissue. Neoplastic areas contained irregular sized mammary gland with papillary grown luminal epithelial cells in single or double cells layer with mitotic figures and small amounts of proliferated myoepithelial cells. Proliferated myoepithelial cells also produced slightly basophilic mucinous materials. Based on the gross, histopathologic and special staining characteristics, this dog was diagnosed as 90% of apocrine sweat gland aenocarcinoma and 10% mammary. complex adenomas in mammary masses. In our best knowledge, this is the first report for concurrent occurrence of apocrine sweat gland adenocarcinoma and mammary gland complex adenoma in mammary masses of the same dog.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.78-85
• /
• 1999

Burning characteristics of solid propellants embedded with four kinds of metal wires(Ag, Cu, Al, Ni-Cr wire) were studied with varying wire diameters(O.10.8 mm) lot N-5 propellant. It was found that the order of the burning rate increment ratio($r_w$/$r_sb$) was Ag wire > Cu wire > Al wire> Ni-Cr wire which was the same as the order of the magnitude of thermal diffusivity. The burning rate increment ratio($r_w$/$r_sb$) of N-5 propellant was less than that of composite Propellant because of the difference of adiabatic flame temperature and flame structure. When Ag, Cu and Al wire having high thermal diffusivity were embedded in N-5 propellant, the plateau and mesa characteristics of the double base propellant were disappeared, but not disappeared in the case of propellant embedded with Ni-Cr wire due to its poor thermal conductivity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.10-18
• /
• 2017

The problem of non-ideal detonation propagation velocities in heterogeneous hybrid mixtures is studied in the case of a high explosive with suspended fine aluminum (Al) particles. Since there exist difference in the time scales of the characteristic induction and combustion of High Explosives and solid particles, the process of energy release behind the leading shock front occurs over an extended period of time. The problem is analyzed by the theory of the mechanics of multiphase media with mass, momentum and heat exchanges between particles and gases. The numerical results match the available experimental results of heavily aluminized (5~25% Al weight) HMX explosive obtained previously.

• KIEAE Journal
• /
• v.8 no.4
• /
• pp.63-69
• /
• 2008

The thesis is a comparative analysis of Infill Technologies between Korea's long-life Mock-up House, a study driven by 'Durability and Flexibility of Long-life Housing Technology Development' of R&D, and Japan's KSI experimental house, the major example of Japan's long-llfe housing. In terms of the domestic Mock-up House, a system of building the floor first was applied. The floor material of each housing unit required a development of dry heating component that is partially substitutable in order to avoid conflict with the finishing. Also, a development of a floor system that can counteract against the construction inaccuracy was required. In the Case of an outer wall, need to make the wall with the chassis. In the case of ceiling, need to develop the double ceiling system which is good for sound insulation. Also, in comparison to KSI experimental house in Japan, it would require to develop a wiring system of the ceiling which can react to the movement of the wall. Especially, to assure the flexible nature of an internal wall, it would desperately require the research and development of the products related to components and flexible system of mechanical/electrical/communication parts as well as supporting institutionalized system for this development. Furthermore, for KSI experimental house in Japan, it would be necessary to formulate a construction manual as well as a systematic and practical planning guide to invent a new interface rule which will secure simplicity of assembling, dismantling, installation and replacement of architectural components for which research development is quite insignificant at the moment. This effort will have to continue to give a solid direction for better application of such reference manual during construction and development of long life span apartment by public sector as well as private corporations.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.117-130
• /
• 1997

The purpose of this study were to identify the design elements and the changing flow of advertisement from 1970's to 1990's by using content analysis of men's magazines. Finding were as followed; First through the analysis of men's wear advertisement in magazine it was found that the closer to 1990's the more various men's wear styles and backgrounds were advertized. These were more image oriented than product oriented. Since 1980 the advertisement about the licenced and the imported brands have been increased and the serial advertisement has shown more fre-quently than the 1-page advertisement since 1990's ; Second two piece suit was dominated in men's wear during 1970's and 1980's From 1990's this style was decresed in stead combi suit was increased. In 1970's the X silhouette was infashion and the y and the X silhouette was in fashion and the y and X sillhouette were increased during 1980's . The H silhouette was dominated in 1990's The brighter and the more various colors appeared in 1990's than in 1970's. The brighter and the more various colors appeared in 1990's than in 1970's The solid pattern was the main flow in men's wear however the stripes and the the check patterns were added in 1990's Third single breasted jacket style with two buttons and tailored collar was in fashion during 1970's . The length of the v-zone was shorter than half at this time however it was lengthened in 1980's . Also the the length of the jacket was lengthened. In 1990's the double breasted jacket style and two buttons were increased. The length of the v-zone and jacket were also lengthened.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.436-441
• /
• 2009

An air filter is a device to remove dust from the air supplied to the automotive engine. A requirement for the optimum air filter is to improve the capability to remove particles from the air it takes in, that is the efficiency and amount of dust collection. By removing dust from the air, the air filter prevents the engine cylinder from wear, reduces ventilation resistance, and thus improves engine output and guarantees intake performance. In order to guarantee such air filter performance, it is very important to properly seal the air filter. For passenger cars made in Korea, the air filters are fabricated with steel caps as their frames are large and their engine capacity is big. Recently however, European countries and Japan started using urethane for manufacturing the air filter, so that all foreign-made cars now have urethane filters. The urethanes used for air filters are applied in two ways: One is to use soft urethane for both top and bottom of the air filter and the other is to use soft urethane for the top and hard urethane for the bottom. Each of these method has unique problems. In this study, hard urethane is used for both top and bottom of the filter in order to improve those problems and increase the sealing efficiency. Especially for the top, NBR (rubber mold) is pre-settled in tough urethane and then the urethane is solidified through foaming, which makes it possible to develop a solid and double-sealed filter.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.160-169
• /
• 2000

This study was conducted to understand the inhibitory garlic and ginger against the growth of food born pathogenic bacteria. Juice was prepared from the raw spices by using an electric homogenizer and membrane filter. Dry-powdered spices were treated with double distilled water and 70% ethanol to extract the antibacterial substances, respectively. Growth inhibitory effects of juice and extracts of the spices were monitored by using bacterial strains such as B. subtilis, L. moncytogenes, S. aureus,E. coli O157 : H7, P. aeruginosa, and S. typhimurium. On a solid medium where E. coli and S. aureus cells were grown, ginger juice formed inhibitory zone at the concentrations of 2-10% by paper disc test. The Bone formed by ginger juice was wider and more transparent than that formed by garlic juice on the same concentration.1. monocytogenes and B. subtilis were more sensitive to garlic juice than others, and stopped growing at 2% garlic juice. Ginger juice showed the growth inhibition by 30-50% at 1.0% concentration. On the contrast, P. aeruginosa which resisted to the garlic juice was the most sensitive to ginger juice. Water extract of garlic was not effective to inhibit the bacterial growth, while 2% ginger extract completely inhibited the growth of E. coli and S. aureus. Alcohol extract of ginger inhibited the growth of bacteria at the concentration of 0.3%. This growth inhibition is almost 10 times lower than that of the garlic extract. It was clear that ginger had more potential than garlic as an inhibitor to control the growth of the indicator organisms.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.276-280
• /
• 2009

A Cr:YAG crystal was used as a saturable absorber for passive Q-switching of a Nd:$YVO_4$ laser which was pumped by a 1-W continuous wave laser diode. The first surface of the Cr:YAG was high-reflection coated for the pump wavelength. The high-reflection coating improved the absorption efficiency of the pump beam in the Nd:$YVO_4$ through double pass absorption. It also prevented pump beam induced partial bleaching of the Cr:YAG. The peak-to-peak pulse fluctuation of passively Q-switched laser output was approximately 4 %. The minimum pulse-width was measured to be 7.11 ns. Also, the average pulse repetition rate was 9 kHz and the maximum output power was 16.27 mW.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.999-1004
• /
• 2007

Spherical porous silica supports modified with titanium or zirconium alkoxides were prepared, and allyl groups were chemically attached to the titanized or zirconized silica supports, and the product was cross-polymerized with a double bond containing cellulose derivative to yield new CSPs (chiral stationary phases). Magic angle spinning 13C solid state NMR and elemental analysis were used to characterize the CSPs. The performances of the chiral stationary phases were examined in comparison with a conventional chiral stationary phase. Spherical porous silica particles modified with 3,5-dimethylphenylcarbamate of cellulose were prepared and used as the conventional chiral stationary phase. Chromatographic data were collected for a few pairs of enantionmers in heptane/2-propanol mixed solvents of various compositions with the three chiral columns and the results were comparatively studied. The separation performance of the chrial phase made of the titanized silica was better than the others, and the separation performance of the chiral phase of the zirconized silica was comparable to that of the conventional chiral phase. The superiority of titanized silica over bare or zirconized silica in chiral separation seemed to be owing to the better yield of crosslinking (monitored by increase of carbon load) for titanized silica than for the others.

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.127-141
• /
• 2014

A preliminary study of a new pulsatile pump that will work to a frequency greater than 1 Hz, is presented. The fluid-structure interaction between a Newtonian blood flow and a piston drive that moves with periodic speed is simulated. The mechanism is of double effect and has four valves, two at the input flow and two at the output flow; the valves are simulated with specified velocity of closing and reopening. The simulation is made with finite elements software named COMSOL Multiphysics 3.3 to resolve the flow in a preliminary planar configuration. The geometry is 2D to determine areas of high speeds and high shear stresses that can cause hemolysis and platelet aggregation. The opening and closing valves are modelled by solid structure interacting with flow, the rhythmic opening and closing are synchronized with the piston harmonic movement. The boundary conditions at the input and output areas are only normal traction with reference pressure. On the other hand, the fluid structure interactions are manifested due to the non-slip boundary conditions over the piston moving surfaces, moving valve contours and fix pump walls. The non-physiologic frequency pulsatile pump, from the viewpoint of fluid flow analysis, is predicted feasible and with characteristic of low hemolysis and low thrombogenesis, because the stress tension and resident time are smaller than the limit and the vortices are destroyed for the periodic flow.