• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.98-104
• /
• 2009

An InGaP/GaAs MMIC LC VCO designed with Harmonic Noise Frequency Filtering(HNFF) technique is presented. In this VCO, internal inductance is found to lower the phase noise, based on an analytic understanding of phase noise. This VCO directly drives the on-chip double balanced mixer to convert RF carrier to IF frequency through local oscillator. Furthermore, final power performance is improved by output amplifier. This paper presents the design for a 1.721 GHz enhanced LC VCO, high power double balance mixer, and output amplifier that have been designed to optimize low phase noise and high output power. The presented asymmetric inductance tank(AIT) VCO exhibited a phase noise of -133.96 dBc/Hz at 1 MHz offset and a tuning range from 1.46 GHz to 1.721 GHz. In measurement, on-chip down-converter shows a third-order input intercept point(IIP3) of 12.55 dBm, a third-order output intercept point(OIP3) of 21.45 dBm, an RF return loss of -31 dB, and an IF return loss of -26 dB. The RF-IF isolation is -57 dB. Also, a conversion gain is 8.9 dB through output amplifier. The total on-chip down-converter is implanted in 2.56${\times}$1.07 mm$^2$ of chip area.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.764-768
• /
• 2002

본 논문에서는 (주)타키오닉스의 SiGe HBT 공정을 이용하여 double balanced Gilbert cell down conversion MMIC mixer를 구현한 결과를 제시하고, 이를 통해 RFIC 설계용 SiGe HBT 파운드리의 정확성과 신뢰성을 평가하였다. 제작된 Mixer는 3 V 동작 전압에서 10 mA의 전류를 소모하며, 2 GHz의 주파수 대역에서 17 dB의 Conversion Gain과 9.8 dB NF, -4.2 dBm Output 1 dB Compression Point, -27 dEc의 RF-IF Isolation의 특성을 나타내었으며 우수한 50 $\Omega$ 입. 출력 정합 특성을 갖는다. 시뮬레이션 결과와 측정결과는 거의 유사한 특성을 가지며, 이를 통해 SiGe HBT 모델 라이브러리의 정확성과 공정의 재현성을 검증할 수 있었다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.86-91
• /
• 2012

Fatigue tests and analyses were carried out to investigate fatigue strength and crack initiation point of load-carrying asymmetric double bevel cruciform welded joints. Mesh-insensitive structural stress approach was adopted to estimate high precise fatigue life and crack initiation point. Two different case material and weld shape were considered in this study. Results of fatigue tests and analyses were compared and discussed in consideration of applicability of structural stress approach as the reliable fatigue assessment method of cruciform welded joints.

• 통합자연과학논문집
• /
• 제12권4호
• /
• pp.122-126
• /
• 2019

In this paper, we propose a simple and efficient retrieval technique using the feature value of the corner region, which is one of the shape information attributes of images. The proposed algorithm extracts the edges and corner points of the image and rearranges the feature values of the corner regions doubly, and then measures the similarity with the image in the database using the correlation of these feature values as the feature vector. The proposed algorithm is confirmed to be more robust to rotation and size change than the conventional image retrieval method using the corner point.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.889-896
• /
• 2006

The concept of reliability has been applied to the topology optimization based on a reliability index approach or a performance measure approach. Since these approaches, called double-loop single vector approach, require the nested optimization problem to obtain the most probable point in the probabilistic design domain, the time for the entire process makes the practical use infeasible. In this work, new reliability-based topology optimization method is proposed by utilizing single-loop single-vector approach, which approximates searching the most probable point analytically, to reduce the time cost. The results of design examples show that the proposed method provides efficiency curtailing the time for the optimization process and accuracy satisfying the specified reliability.

• 한국공간구조학회논문집
• /
• 제3권3호
• /
• pp.95-103
• /
• 2003

Frame is one of the most commonly used structural systems for the resistance of applied loads. Many researchers have recently conducted their studies to investigate the effect of several parameters such as the connection flexibility, boundary condition of each support, beam-to-column stiffness ratio. These parameters play important roles on the characteristic behavior of frames. A simplified spring model is proposed to obtain the story drifts of frames with various beam-to-column connection stiffnesses in this research. A point bracing system with adequate spring stiffness is also suggested to establish the relationship between the applied load and the resisting translational spring stiffness within the limit state of story drift.

• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.585-591
• /
• 1989

The effects of the charged metal on the overall electrostatic potential profiles and the capacitances of the electrical double layer are brought out. A model with a simplified jellium and a point-charged electrolyte is utilized in the present calculations. Electrons are assumed not to penetrate electrode surface due to a strong screening of electrolyte at the interface. Electron density functions and ion density functions are obtained, which are also based upon the Poisson equation and Boltzmann equation on either side of the interface. A complete potential profile starting from bulk electrode and ending at bulk electrolyte is obtained by connecting the two potential profiles (one inside the metal electrode, the other inside the electrolyte) with proper boundary conditions. In spite of the simplicity of the model, the present model reveals the importance of the effect of the charged metal on the electrostatic potential profile and the electrical double layer capacitances. The results are discussed and compared with the predictions by Gouy Chapman theory.

• Journal of Multimedia Information System
• /
• 제8권1호
• /
• pp.23-30
• /
• 2021

Palmprint has become a popular biometric modality; however, palmprint recognition has not been conducted in video media. Video palmprint recognition (VPR) has some advantages that are absent in image palmprint recognition. In VPR, the registration and recognition can be automatically implemented without users' manual manipulation. A good-quality image can be selected from the video frames or generated from the fusion of multiple video frames. VPR in contactless mode overcomes several problems caused by contact mode; however, contactless mode, especially mobile mode, encounters with several revere challenges. Double-line-single-point (DLSP) assisted placement technique can overcome the challenges as well as effectively reduce the localization error and computation complexity. This paper modifies DLSP technique to reduce the invalid area in the frames. In addition, the valid frames, in which users place their hands correctly, are selected according to finger gap judgement, and then some key frames, which have good quality, are selected from the valid frames as the gallery samples that are matched with the query samples for authentication decision. The VPR algorithm is conducted on the system designed and developed on mobile device.

• 호남수학학술지
• /
• 제45권4호
• /
• pp.598-609
• /
• 2023

The purpose of this article is to obtain the spectrum, fine spectrum, approximate point spectrum, defect spectrum and compression spectrum of the double band matrix U (a₀, a₁, a₂; b₀, b₁, b₂), b₀, b₁, b₂≠0 on the sequence space ℓ_p (1 < p < ∞).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권4호
• /
• pp.253-265
• /
• 2011

In this paper, we study the existence of mild solutions for double perturbed impulsive neutral functional evolution equations with infinite delay in Banach spaces. The existence of mild solutions to such equations is obtained by using the theory of the Hausdorff measure of noncompactness and Darbo fixed point theorem, without the compactness assumption on associated evolution system. An example is provided to illustrate the theory.