• Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.99-107
• /
• 2015

A natural hybrid of a probable intergeneric mating between the striped shiner Pungtungia herzi and the stone morocco Pseudorasbora parva (Cypriniformes: Cyprinidae) was captured in the Geumho River, a tributary of the Nakdong River basin in Korea. Morphological characters and DNA sequences were analyzed to verify its hybrid state and identify the parentage of its parent species. The hybrid exhibited a phenotypic intermediacy between the two parent species in the number of vertebrae and the mouth shape. Out of 1,488 base pair (bp) positions of the nuclear recombination activating gene 1 gene (rag1), which has a biparental mode of inheritance, 41-bp substitutions were detected between the two parent species, whereas an electropherogram of the hybrid displayed polymorphic double peaks at all of the base positions, along with one additional one, strongly indicating its hybrid state. Meanwhile, sequence comparison of the mitochondrial cytochrome b gene (mt-cyb) (1,140 bp), which has a maternal mode of inheritance, showed only 5-22-bp differences (97.6-99.5% identities) between the hybrid and Pu. herzi, but as many as 158-168-bp differences (85.2-86.1% identities) between the hybrid and Ps. parva, clearly indicating Pu. herzi as the maternal species. Thus, combined analyses of independent data sets (i.e., morphology and nuclear and mitochondrial DNA sequences) offered convincing evidence for the hybrid state of a naturally occurring hybrid resulting from intergeneric mating between a female Pu. herzi and a male Ps. parva.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.324-329
• /
• 2014

To facilitate the construction of genetically-modified pigs, we produced cloned embryos derived from porcine fibroblasts transfected with a pair of engineered zinc finger nuclease (ZFN) plasmids to create targeted mutations and enriched using a reporter plasmid system. The reporter expresses RFP and eGFP simultaneously when ZFN-mediated site-specific mutations occur. Thus, double positive cells ($RFP^+/eGFP^+$) were selected and used for somatic cell nuclear transfer. Two types of reporter based enrichment systems were used in this study; the cloned embryos derived from cells enriched using a magnetic sorting-based system showed better developmental competence than did those derived from cells enriched by flow cytometry. Mutated sequences, such as insertions, deletions, or substitutions, together with the wild-type sequence, were found in the cloned porcine blastocysts. Therefore, genetic mutations can be achieved in cloned porcine embryos reconstructed with ZFN-treated cells that were enriched by a reporter-based system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.489.2-489.2
• /
• 2014

The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.339-348
• /
• 2005

On the analysis of triacylglycerol (TG) from the kernels of Acanthopanax sessiliflorus by reversed phase-HPLC, it was separated into three main fractions of PN 44, 46 and 48, according to partition number (PN). On the contrary, it could be clearly classified into seven fractions of SMM, MMM, SMD, MMD, SDD, MDD and MDT by silver ion-HPLC by the number of double bond in the acyl chains of TG species. But resolution of so-called critical pairs of TG molecular species such as molecular pairs of $P_eLL$ $[C_{18:1{\omega}12}/(C_{18:2{\omega}6)2}]$ and OLL $[C_{18:1{\omega}9}/(C_{18:2{\omega}6)2}]$ and OOL $[(C_{18:1{\omega}9)2}/C_{18:2{\omega}6]$, and $P_eP_eL$ $[(C_{18:2{\omega}12)2}/C_{18:1{\omega}6]$ was not achieved $(P_e;$ petroselinic acid, L; linoleic acid, O; oleic acid). On the other hand, TG extracted from Aralia continentalis kernels were also fractionated into seven groups of SSM, SMM, MMM, SMD, MMD, SDD and MDD (S; saturated acid, M; monoenoic acid, D; dienoic acid) by silver ion-HPLC, although it's were classified into three groups of PN 44, 46 and 48 by reversed phase-HPLC. The fractions of SMM, MMM, MMD and MDD were divided into two subfractions, respectively; the fractions of SMM, MMM, MMD and MDD were resolved into the subfraction of $PP_e/P_e$ and POO (critical pairs from each other), that of $P_e/P_e/P_e$ and OOO, that of $P_e/P_e/L$ and OOL, and that of $P_e/L/L$ and OLL.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.17-23
• /
• 1976

Some methods of analysis of rectangular plates under distributed load of various intensity with interior supports are presented herein. Analysis of many structures such as bottom, side shell, and deck plate of ship hull and flat slab, with or without internal supports, Floor systems of bridges, included crthotropic bridges is a problem of plate with elastic supports or continuous edges. When the four edges of rectangular plate is simply supported, the double Fourier series solution developed by Navier can represent an exact result of this problem. If two opposite edges are simply supported, Levy's method is available to give an "exact" solution. When the loading condition and supporting condition of a plate does not fall into these cases, no simple analytic method seems to be feasible. Analysis of a simply supported rectangular plate under irregularly distributed loads of various intensity with internal supports is carried out by applying Navier solution well as the "Principle of Superposition." Finite difference technique is used to solve plates under irregularly distributed loads of various intensity with internal supports and with various boundary conditions. When finite difference technique is applied to the Lagrange's plate bending equation, any of fourth order derivative term in this equation produces at least five pivotal points leading to some troubles when the resulting linear algebraic equations are to be solved. This problem was solved by reducing the order of the derivatives to two: the fourth order partial differential equation with one dependent variable, namely deflection, is changed to an equivalent pair of second order partial differential equations with two dependent variables. Finite difference technique is then applied to transform these equations to a set of simultaneous linear algebraic equations. Principle of Superposition is then applied to handle the problems caused by concentrated loads and interior supports. This method can be used for the cases of plates under irregularly distributed loads of various intensity with arbitrary conditions such as elastic supports, or continuous edges with or without interior supports, and this method can also be solve the influence values of deflection, moment and etc. at arbitrary position of plates under the live load.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.84-92
• /
• 2000

A GaAs MESFET MMIC transmitter for 2.4 GHz wireless local loop handset is designed and fabricated. The transmitter consists of a double balanced active mixer and a two stage driver amplifier with voltage negative feedback. In particular, a pair of CS-CG(common source-common gate) structure compensates the reduction in dynamic range caused by unbalanced complementary IF input signals. And to suppress the leakage local power at RF port, the mixer is designed by using phase characteristic between the ports of MESFET. At the bias condition of 2.7 V and 55.2 mA, the fabricated MMIC transmitter with chip dimensions of $0.75\times1.75 mm^2$ obtains a measured conversion gain of 38.6 dB, output $P_{idB}$ of 11.6 dBm, and IMD3 at -5 dBm RF output power of -31.3 dBc. This transmitter is well suited for WLL handset.

• Journal of the Korean Society of Costume
• /
• v.60 no.9
• /
• pp.58-76
• /
• 2010

In this study, the shapes of po worn by military officers who served During the period of Japanese Invasion of Korea(1592-1598) were investigated. Findings of the study can be summarized as follows. Various types of po that military officers usually wore during the period of Japanese Invasion of Korea includes jikryeong, dapho, dopo, cheolik, aekjureum, jangeui, jungchimak and bangryeongpo. Out of these types, cheolik and jungchimak were most often used by the officers. Po that were usually worn by military officers during the period of Japanese Invasion of Korea as above mentioned is characterized as no difference in length between the front and back of the costume, kalgit and a pair of coat strings which are directly attached to po. The sleeves of the costume are bean chaff-shaped in some cases and just narrowly shaped in other cases. Similarly, the outer seop of po was either double-layered or single-layered. For jikryeong and dapho, mu is usually type of outside wrinkle. For dopo, its rear kit has the inner hem whose right and left edges are usually distant, respectively by 6~16cm, from the back center of the costume. Cheolik and aekjureum usually have either fine or broad pleats. For jangeui and jungchimak, mu is usually trapezoid in shape. Among various types of po which were usually worn by military officers during the period of Japanese Invasion of Korea, most representative are jikryeong from the tombs of Bae Cheon jo, dapho from Shin Yeo Gwan, dopo from general Bak and Bae Cheon Jo, cheolik from Nam Yoo and Cho Gyeong, aekjureum from Shin Yeo Gwan, jangeui from Kim Ham, jungchimak from Bae Cheon jo and bangryeongpo from Cho Gyeong.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.167-170
• /
• 2004

The stochiometric mix of evaporating materials for the $CuGaT_2$ single crystal thin films was prepared from horizontal furnance. Using extrapolation method of X-ray diffraction patterns for the $CuGaTe_2$ polycrystal, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were 6.025 ${\AA}$ and 11.931 ${\AA}$, respectively. To obtain the single crystal thin films, $CuGaTe_2$ mixed crystal was deposited on throughly etched semi-insulator GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $670^{\circ}C$ and $410^{\circ}C$ respectively, and the thickness of the single crystal thin films is $2.1{\mu}m$. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $CuGaTe_2$ single crystal thin film, we have found that the values of spin orbit coupling ${\Delta}s.o$ and the crystal field splitting ${\Delta}cr$ were $0.079\underline{1}eV$ and $0.246\underline{3}eV$ at 10 K, respectively. From the PL spectra at 10K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be $0.047\underline{0}eV$ and the dissipation energy of the donor-bound exciton and acceptor-bound exciton to be $0.049\underline{0}eV$, $0.055\underline{8}eV$, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1051-1077
• /
• 2021

The secure communication of information is a major concern over the internet. The information must be protected before transmitting over a communication channel to avoid security violations. In this paper, a new hybrid method called compressed encrypted data embedding (CEDE) is proposed. In CEDE, the secret information is first compressed with Lempel Ziv Welch (LZW) compression algorithm. Then, the compressed secret information is encrypted using the Advanced Encryption Standard (AES) symmetric block cipher. In the last step, the encrypted information is embedded into an image of size 512 × 512 pixels by using image steganography. In the steganographic technique, the compressed and encrypted secret data bits are divided into pairs of two bits and pixels of the cover image are also arranged in four pairs. The four pairs of secret data are compared with the respective four pairs of each cover pixel which leads to sixteen possibilities of matching in between secret data pairs and pairs of cover pixels. The least significant bits (LSBs) of current and imminent pixels are modified according to the matching case number. The proposed technique provides double-folded security and the results show that stego image carries a high capacity of secret data with adequate peak signal to noise ratio (PSNR) and lower mean square error (MSE) when compared with existing methods in the literature.