• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.399-400
• /
• 2003

싸이클론은 대기오염물질의 샘플링과 여러 산업공정에서 분진을 제어, 분리하는데 널리 사용되고 있다. 이는 싸이클론의 구조 및 형태가 간단하여, 제작과 운전이 쉽고 비용이 적게 들기 때문이다 하지만 작은 입자에 대한 분리효율이 낮기 때문에 싸이클론의 구조 및 형태를 변화시키거나 싸이클론내에 운전 조건을 변화시켜 높은 분리효율을 얻으려는 연구가 수행되어 왔다. 특히, 싸이클론내에 이중으로 원심력이 작용하게 한 double cyclone(Zhu et al., 2001)과 입자 하전 및 전기장 형성을 위해 고전압을 인가하는 전기싸이클론이(Lim et al., 2001) 최근에 연구가 되어지고 있다. (중략)

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.59-68
• /
• 2000

In this paper Various aerosol cyclones that are developed recently form Kwangju Institute of Science and Technology(KJIST) for increasing collection efficiency or for decreasing pressure drop are reviewed. For the first time, new sets of experimental data are reported on the particle collection efficiency of cyclones with modified surface bodies namely, spiral guide body, circumferential groove body, and vertical groove body. Multi-cylinder cyclones by adding one or two additional cylindrical walls into the conventional cyclone are also described. Ad an attempt to increase the collection efficiency of small particles, electrocyclone using an externally applied electric field was designed and operated. In addition, factors affecting the cyclone performance were studied including flowrate, body and outlet sizes, cyclone dust outlet, and gas property.

• 한국대기환경학회지
• /
• 제24권3호
• /
• pp.336-345
• /
• 2008

A large volume of work has been attempted to improve the separation efficiency of cyclone by establishing new design and optimum operation. An auxiliary device called Post Cyclone (PoC) has been introduced and tested in an earlier work (In order to reduce the emission of fine dust from the reverse flow cyclones). This work applies the PoC to remove the dust and gaseous elements using a centrifugal effect remained in the discharging flow over the cyclone. As a result of the experiment, the efficiency was found best at the high gas concentration and low inlet velocity.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2016

According to the recent increase in the height of supertall buildings, construction lift became one of most important equipment for vertical transportation of resources. However, increase in lifting load during peak time in which the resources are concentrated often causes a risk of construction delay. This study suggests a concept of Double-Cage construction lift, which is a lift with two cages attached together allowing transportation of resources on two consecutive work floors simultaneously. The aim of this study is to present a simulation model suitable for calculating hoisting time of Double-Cage construction lift. The proposed model is expected to be utilized when applying Double-cage construction lift for its efficient operation and management.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1999년도 춘계학술대회 논문집
• /
• pp.159-161
• /
• 1999

• Wind and Structures
• /
• 제37권4호
• /
• pp.315-329
• /
• 2023

We investigated the wind characteristics in the near-surface layer during the landfall of Typhoon Mujigae (2015) based on observations from wind towers in the coastal areas of Guandong province. Typhoon Mujigae made landfall in this region from 01:00 UTC to 10:00 UTC on October 4, 2015. In the region influenced by the eyewall of the tropical cyclone, the horizontal wind speed was characterized by a double peak, the wind direction changed by >180°, the vertical wind speed increased by three to four times, and the angle of attack increased significantly to a maximum of 7°, exceeding the recommended values in current design criteria. The vertical wind profile may not conform to a power law distribution in the near-surface layer in the region impacted by the eyewall and spiral rainband. The gust factors were relatively dispersed when the horizontal wind speed was small and tended to a smaller value and became more stable with an increase in the horizontal wind speed. The variation in the gust factors was the combined result of the height, wind direction, and circulation systems of the tropical cyclone. The turbulence intensity and the downwind turbulence energy spectrum both increased notably in the eyewall and spiral rainband and no longer satisfied the assumption of isotropy in the inertial subrange and the -5/3 law. This result was more significant in the eyewall area than in the spiral rainband. These results provide a reference for forecasting tropical cyclones, wind-resistant design, and hazard prevention in coastal areas of China to reduce the damage caused by high winds induced by tropical cyclones.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.293-298
• /
• 2009

본 연구에서는 193비트 타원곡선 암호화프로세서를 보조프로세서 형태로 제작하여 FPGA에 구현하였다. 프로그램 레벨에서 최적화된 알고리즘과 수식을 제안하여 증명하였고, 검증을 위해 Verilog와 같은 하드웨어 기술언어를 통하여 다시 한번 분석 하여 하드웨어 구현에 적합하도록 수정하여 최적화 하였다. 그 이유는 프로그래밍 언어의 순차적으로 컴파일되고 실행되는 특성이 하드웨어를 직접 구현하는 데에 본질적으로 틀리기 때문이다. 알고리즘적인 접근과 더불어 하드웨어적으로 2중적으로 검증된 하드웨어 보조프로세서를 Altera 임베디드 시스템을 활용하여, ARM9이 내장되어 있는 Altera CycloneII FPGA 보드에 매핑하여 실제 칩 프로토타입 IP로 구현하였다. 구현된 유한체 연산 알고리즘과 하드웨어 IP들은 실제적인 암호 시스템에 응용되기 위하여, 193 비트 이상의 타원 곡선 암호 연산 IP를 구성하는 라이브러리 모듈로 사용될 수 있다.

• 한국응용곤충학회지
• /
• 제19권4호
• /
• pp.221-227
• /
• 1980

1979년 7월 경남 김해에서 딸기 성강 16호의 잎에 흑갈색 내지 암갈색 병반을 형성하는 병해를 발견, 그 병원균을 분리 검토한 결과 우리나라에서는 미기록병해인 Alternaria alternate (Fr.) Keissler로 동정되었으며 본병을 검은무늬병이라 명명하였다. 본균의 분생포자의 형태는 배지간에 차가 심하였으며 C.M.A.에서 평균 $20.1\times9.3{\mu}$, beak의 길이는 $4.0{\mu}$으로서 자연감염된 딸기잎상에서 형성된 것 보다 짧았다. 딸기 49품종에 접종한 결과 성강 16호와 Robinson이 고도감수성이였으며 Catskill, Cyclone, Northwest, Merton princes, Juspa, 및 대학 1호 등의 품종에도 발병을 볼 수 있었으나 31 품종은 전연 발병되지 않았다. 10종(14품종)에 접종한 결과 해바라기, 겹해바라기, 및 멕시코 해바라기에만 심하게 발병되었다.

• 설비공학논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2010

Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.