• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.399-400
• /
• 2003

싸이클론은 대기오염물질의 샘플링과 여러 산업공정에서 분진을 제어, 분리하는데 널리 사용되고 있다. 이는 싸이클론의 구조 및 형태가 간단하여, 제작과 운전이 쉽고 비용이 적게 들기 때문이다 하지만 작은 입자에 대한 분리효율이 낮기 때문에 싸이클론의 구조 및 형태를 변화시키거나 싸이클론내에 운전 조건을 변화시켜 높은 분리효율을 얻으려는 연구가 수행되어 왔다. 특히, 싸이클론내에 이중으로 원심력이 작용하게 한 double cyclone(Zhu et al., 2001)과 입자 하전 및 전기장 형성을 위해 고전압을 인가하는 전기싸이클론이(Lim et al., 2001) 최근에 연구가 되어지고 있다. (중략)

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.E
• /
• pp.59-68
• /
• 2000

In this paper Various aerosol cyclones that are developed recently form Kwangju Institute of Science and Technology(KJIST) for increasing collection efficiency or for decreasing pressure drop are reviewed. For the first time, new sets of experimental data are reported on the particle collection efficiency of cyclones with modified surface bodies namely, spiral guide body, circumferential groove body, and vertical groove body. Multi-cylinder cyclones by adding one or two additional cylindrical walls into the conventional cyclone are also described. Ad an attempt to increase the collection efficiency of small particles, electrocyclone using an externally applied electric field was designed and operated. In addition, factors affecting the cyclone performance were studied including flowrate, body and outlet sizes, cyclone dust outlet, and gas property.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.3
• /
• pp.336-345
• /
• 2008

A large volume of work has been attempted to improve the separation efficiency of cyclone by establishing new design and optimum operation. An auxiliary device called Post Cyclone (PoC) has been introduced and tested in an earlier work (In order to reduce the emission of fine dust from the reverse flow cyclones). This work applies the PoC to remove the dust and gaseous elements using a centrifugal effect remained in the discharging flow over the cyclone. As a result of the experiment, the efficiency was found best at the high gas concentration and low inlet velocity.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.64-65
• /
• 2016

According to the recent increase in the height of supertall buildings, construction lift became one of most important equipment for vertical transportation of resources. However, increase in lifting load during peak time in which the resources are concentrated often causes a risk of construction delay. This study suggests a concept of Double-Cage construction lift, which is a lift with two cages attached together allowing transportation of resources on two consecutive work floors simultaneously. The aim of this study is to present a simulation model suitable for calculating hoisting time of Double-Cage construction lift. The proposed model is expected to be utilized when applying Double-cage construction lift for its efficient operation and management.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.159-161
• /
• 1999

• Wind and Structures
• /
• v.37 no.4
• /
• pp.315-329
• /
• 2023

We investigated the wind characteristics in the near-surface layer during the landfall of Typhoon Mujigae (2015) based on observations from wind towers in the coastal areas of Guandong province. Typhoon Mujigae made landfall in this region from 01:00 UTC to 10:00 UTC on October 4, 2015. In the region influenced by the eyewall of the tropical cyclone, the horizontal wind speed was characterized by a double peak, the wind direction changed by >180°, the vertical wind speed increased by three to four times, and the angle of attack increased significantly to a maximum of 7°, exceeding the recommended values in current design criteria. The vertical wind profile may not conform to a power law distribution in the near-surface layer in the region impacted by the eyewall and spiral rainband. The gust factors were relatively dispersed when the horizontal wind speed was small and tended to a smaller value and became more stable with an increase in the horizontal wind speed. The variation in the gust factors was the combined result of the height, wind direction, and circulation systems of the tropical cyclone. The turbulence intensity and the downwind turbulence energy spectrum both increased notably in the eyewall and spiral rainband and no longer satisfied the assumption of isotropy in the inertial subrange and the -5/3 law. This result was more significant in the eyewall area than in the spiral rainband. These results provide a reference for forecasting tropical cyclones, wind-resistant design, and hazard prevention in coastal areas of China to reduce the damage caused by high winds induced by tropical cyclones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.293-298
• /
• 2009

In this contribution, a 193-bit elliptic curve cryptography coprocessor was implemented on an FPGA board. Optimized algorithms and numerical expressions which had been verified through C program simulation, should be analyzed again with HDL (hardware description language) such as Verilog, so that the verified ones could be modified to be applied directly to hardware implementation. The reason is that the characteristics of C programming language design is intrinsically different from the hardware design structure. The hardware IP which was double-checked in view of hardware structure together with algoritunic verification, was implemented on the Altera CycloneII FPGA device equipped with ARM9 microprocessor core, to a real chip prototype, using Altera embedded system development tool kit. The implemented finite field calculation IPs can be used as library modules as Elliptic Curve Cryptography finite field operations which has more than 193 bit key length.

• Korean journal of applied entomology
• /
• v.19 no.4 s.45
• /
• pp.221-227
• /
• 1980

A new disease of strawberry caused by Alternaria was found in Gim Hae, Gyougnam province, in July 1979. The symptoms of the disease occurred mainly on leaves as showing dark brown spots with circular to irregular, $5\~6mm$ in diameter. The pathogen was identified as Alternaria alternate (Fr.) Keissler which has not been described in Korea as a pathogen of strawberry disease. The common name of the disease was given as Gum un mum byung of strawberry. The conidia shape and size of this fungus varied considerably with culture media. The measurements of conidia and beak on corn meal agar were $20.1\times9.3{\mu}\;and\;4.0\mu$, respectively, which were shorter than those on strawberry leaf lesions in the field. Among 49 strawberry varieties tested, Morioca 16 and Robinson were highly susceptible to the disease by artificial inoculation and Catskill, Cyclone, Northwest, Merton princess, Juspa and Daehak I were moderately susceptible whereas 31 varieties were resistant. This fungus could also infect the leaf of Common garden sunflower, Double sunflower and Mexican sunflower among the 14 plants species tested.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.1
• /
• pp.13-20
• /
• 2010

Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.