• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.751-756
• /
• 2009

In the perspective of saving energy in buildings, the high performance of insulation and air tightness for improving the heating and the cooling efficiency, has brought economically positive effects. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and is also very harmful to the residents, because they spend over 90% of their time indoors. Therefore, the ventilation is important to keep the indoor environment clean and it can also save the energy consumption. In this study, a HEPA type nano ceramic filter is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. The double layer filter, which has $30{\mu}m$ in diameter at the conditions of 10wt% of concentration and 3kV/cm of the electric intensity, is produced by electrospinning. The filtration coating technology is confirmed in the solution with $SiO_2$ nano particles using polymer nano fibers. Also double layer filters are coated with $SiO_2$ nano particles and finally the porous construction materials are made by sintering in the electric furnace at $200{\sim}1400^{\circ}C$. The efficiency is measured 96.67% at the particle size of $0.31{\mu}m$, which is slightly lower than HEPA filter. However the efficiency is turned out to be sufficient.

• Journal of Pharmaceutical Investigation
• /
• 제39권4호
• /
• pp.257-261
• /
• 2009

Effective therapeutics for renal failures have not yet been developed until now. Recently, there was a report showing that Wen-pi-tang-Hab-Wu-ling-san (WHW) prescriptions had the potential to prevent renal failures through the increased expression of HSP-27 and HSP-72 after ischemia/reperfusion. Therefore, formulation studies by pH-specific released systems were carried out to exhibit the optimal activity of WHW prescriptions in this study. WHW prescriptions were separately extracted using water into two parts of stomach-released (SR) and intestine-released (IR) extracts. Subsequently, the double-layered tablet was prepared using the SR extracts and pharmaceutical additives and enteric-coated IR tablet. Dissolution studies were carried out to figure out the release of cinnamic acid and icarrin from SR tablet, IR tablet and double-layered tablet, respectively. The complete release of cinnamic acid from SR tablet showed 90min after dissolution in pH 1.2 and insignificant drug released from IR tablet. As well as, icarrin from IR tablet completely released in pH 6.8 and 7.4 as enteric-coating film dissolved.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.245-248
• /
• 2011

Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.315-321
• /
• 2015

Rare-earth zirconates, such as $La_2Zr_2O_7$ and $Gd_2Zr_2O_7$, have been investigated as one of the candidates for replacing conventional yttria-stabilized zirconia (YSZ) for thermal barrier coating (TBC) applications at higher turbine inlet temperatures. In this study, double-ceramic-layer (DCL) TBCs of YSZ 1st layer and $La_2Zr_2O_7$ top coat layer are fabricated by suspension plasma spray with serial liquid feeders. Microstructures, hardness profiles, and thermal durability of DCL-TBCs are also characterized. Fabricated DCL-TBCs of YSZ/$La_2Zr_2O_7$ exhibit excellent properties, such as adhesion strength (>25 MPa) and electrical thermal fatigue (~1429 cycles), which are comparable with TBCs fabricated by atmospheric plasma spray.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.103-108
• /
• 1997

본 연구에서는 2단계 실리콘 건식식각 공정과 게이트 절연막으로 열산화막과 tetraethylorthosilicate(TEOS) 산화막의 이중막을 사용하고, 스핀-온-그래스 (Spin-on-glass:SOG) 에치백(etch-back) 공정에 의하여 게이트를 제작하는 새로운 방법을 통하여 실리콘 전계방출소자를 제작하고 그 특성을 분석하였다. 게이트 절연막의 누설전류 를 감소시키면서 팁과 게이트의 간격을 줄이는 구조인 이중 게이트 절연막을 형성하기 위하 여 팁 첨예화 산화 공정후 낮은 점도의 감광막(photo resist)을 시료에 도포한 후, $O_2$ 플라 즈마 에싱(ashing)하는 공정을 채택하였다. 이러한 공정으로 제작된 에미터 팁의 높이와 팁 반경은 각각 1.1$\mu\textrm{m}$와 100$\AA$정도이었으며, 256개 팁 어레이에서 전계방출의 문턱전압은 40V 이하이었다. 60V의 게이트전압에서 23$\mu\textrm{A}$(즉, 90nA/팁)의 높은 아노드 전류를 얻을 수 있었 다. 이때, 게이트 전류는 아노드전류의 약0.1%이하였다. 개발된 공정기술로 게이트 개구도 크게 감소시켰을 뿐 아니라, 게이트 누설전류를 현저히 감소시켰다.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.335-343
• /
• 2019

In this study, $Sr_2Ni_{1.8}Mo_{0.2}O_{6-{\delta}}$ (SNM) with a double perovskite structure was investigated as an alternative anode for use in the $CH_4$ fuel in solid oxide fuel cells. SNM demonstrates a double perovskite phase over $600^{\circ}C$ and marginal crystallization at higher temperatures. The Ni nanoparticles were exsolved from the SNM anode during the fabrication process. As the SNM anode demonstrates poor electrochemical and electro-catalytic properties in the $H_2$ and $CH_4$ fuels, it was modified by applying a samarium-doped ceria (SDC) coating on its surface to improve the cell performance. As a result of this SDC modification, the cell performance improved from $39.4mW/cm^2$ to $117.7mW/cm^2$ in $H_2$ and from $15.9mW/cm^2$ to $66.6mW/cm^2$ in $CH_4$ at $850^{\circ}C$. The mixed ionic and electronic conductive property of the SDC provided electrochemical oxidation sites that are beyond the triple boundary phase sites in the SNM anode. In addition, the carbon deposition on the SDC thin layer was minimized due to the SDC's excellent oxygen ion conductivity.

• 한국식품영양과학회지
• /
• 제46권7호
• /
• pp.857-867
• /
• 2017

본 연구는 저분자 해양성 콜라겐과 GABA 생성 L. brevis CFM20의 섭취 시 다양한 인체 장내 조건에 의한 유산균의 사멸과 콜라겐의 분해를 최소화하고자 진행되었다. 유산균과 저분자 해양성 콜라겐의 안정성을 향상하기 위하여 alginate와 chitosan을 이용하여 이중코팅캡슐을 제조하였다. L. brevis CFM20의 온도별 생육특성을 분석하여 캡슐화에 유리한 배양온도를 조사한 결과 $37^{\circ}C$에서 배양한 균의 대수기가 가장 빠르고 GABA양 또한 $400{\mu}g/mL$로 가장 높은 수치를 나타내어 생육속도에서 가장 유리한 것으로 나타났다. Calcium-alginate bead 법으로 캡슐을 제조한 결과 1~2 mm 사이의 일정한 구형의 캡슐을 제조하였으며, chitosan을 이용하여 이중코팅캡슐을 제조한 결과 캡슐의 크기가 감소하였고 외형적으로도 더욱 단단해짐을 확인하였다. 제조된 이중코팅캡슐을 CLSM과 SEM을 이용하여 관찰한 결과, chitosan 코팅을 한 이중코팅캡슐의 표면이 alginate와의 가교결합에 의해 더욱 치밀해짐을 확인하였다. 체내 위와 장내 조건에서 시간에 따른 이중코팅캡슐의 L. brevis CFM 20 생균수를 분석한 결과 캡슐화한 경우 균의 감소가 더디어 더 안정하다고 판단하였다. 이중코팅캡슐을 체내 위와 장내 조건에서 시간에 따른 GABA와 hydroxyproline의 용출량을 분석한 결과 두 경우 모두 위 조건에서는 낮은 수치를 나타내었고 장내 조건에서는 시간이 지남에 따라 급격하게 증가한 것을 확인하였다. 동물실험 결과 콜라겐 섭취군이 비섭취군에 비해 체중증가량, 혈청 지질 농도 등이 적은 것을 확인하였고, 혈액 내 hydroxyproline 함량, 진피의 피부조직 밀도가 더 높은 것으로 관찰되었다. 본 연구에서 개발된 이중코팅캡슐을 섭취하는 경우 위에서는 안정한 상태였다가 장에 도달한 후 붕해됨으로 인하여, 유산균, GABA, 콜라겐 및 키토산의 작용으로 인체에 유익한 효과를 기대할 수 있을 것으로 생각된다.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1721-1726
• /
• 2016

4-types of coils were prepared by coating with polyamideimide (PAI) organic/inorganic hybrid. One type was made with original PAI vanish and the other 3-types were made of double layers, that was to say, high flexural PAI layer and high anti-corona PAI/nanosilica (15 wt%) layer. Drying temperature (T/D) were $220^{\circ}C$, $240^{\circ}C$, and $260^{\circ}C$, respectively and rectangular type coil for high-voltage rotating machine was used. DC and AC electrical breakdown tests were carried out in order to study the insulation properties according to T/D temperature and coil curvature (5, 15, and $25mm{\Phi}$). As the curvature increased, electrical breakdown voltage decreased and as T/D temperature decreased, electrical breakdown voltage increased.

• 한국주거학회논문집
• /
• 제16권2호
• /
• pp.1-10
• /
• 2005

The purpose of this study is providing useful information for consumer-friendly house plan by investigating remodeling apartments according to the area type and size. In order to achieve this aim, case study was applied. The case study was conducted of five small, medium, and large size apartments through depth-interviews, actual survey, and questionnaires on the remodeling behavior, interior design, and interior atmosphere. The results of the study are as follows: Structural alterations were frequent in communal area, and then in private and household areas. Changing lighting fixtures was frequent in all area types, and especially, in communal areas installing extra decoration was frequently observed. Besides, alterations of doors and window frames were carried out in communal, private, housework and service areas by using wood, aluminum sashes, double-glazing, and paint coating. Finally, in housework areas the material and color of counters were changed into wooden and achromatic.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.641-646
• /
• 2016

Coil specimen was prepared by coating a copper wire with two varnish thin layers: the first was polyamideimide (PAI)/nanosilica (5 wt%) varnish and the second was anti-corona PAI/nanosilica (15 wt%) varnish. Insulation breakdown voltage was investigated under inverter surge condition at $20^{\circ}C$, $70^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, respectively. The insulation lifetime of the two layered coil was tens of times longer than that of original PAI coil. And the insulation lifetime decreased with increasing ambient temperature because there was weak binding strength between copper and varnish layer.