• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.20-26
• /
• 1993

The base-collector capacitance of an npn bipolar transistor in bipolar or BiCMOS technology has significant influence on the switching performances, and comprises pnjunction component and MOS component. Both components have complicated dependences on the isolation oxide structure, epitaxial doping density, and bias voltage. Analytical/empirical formulas for both components are derived in this paper for a generic isolation structure as a function of epitaxial doping density and bias voltage based on some theoretical understanding and two-dimensional device simulations. These formulas are useful in estimating the effect of device isoation schemes on the switching speed of bipolar transistors.

• 공업화학
• /
• 제28권5호
• /
• pp.565-570
• /
• 2017

흡연으로 발생되는 담배연기는 주류 연기와 비주류 연기로 구분된다. 담배연기 중 실내로 확산되는 연기의 대부분은 비주류 연기이며, 비주류 연기의 유해물질 농도는 주류 연기의 농도보다 2~3배 높다. 본 연구에서는 $TiO_2$ 광촉매의 doping 성분에 따른 비주류 담배연기 내의 CO, $H_2S$, $NH_3$, HCHO의 제거 효율을 확인하고자 하였다. 실험 결과, CO가 최대 78.37% 제거되었으며, $TiO_2$ 광촉매 공정이 CO 제거에 효과적인 것으로 확인되었다. 또한 CO, $H_2S$, HCHO의 제거에 있어서 $TiO_2$ 광촉매에 doping된 O, Si 성분에 의해 영향을 크게 받는다. 결론적으로, doping된 O, Si 성분이 많을수록 유해물질 제거효율이 높다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.232-232
• /
• 2012

The doping of semiconducting elements is essential for the development of silicon quantum dot (QD) solar cells. Especially the doping elements should be activated by substitution at the crystalline sites in the crystalline silicon QDs. However, no analysis technique has been developed for the analysis of the activated dopants in silicon QDs in $SiO_2$ matrix. Secondary ion mass spectrometry (SIMS) is a powerful technique for the in-depth analysis of solid materials and the impurities analysis of boron and phosphorus in semiconductor materials. For the study of diffusion behaviour of B and P by SIMS, Si/$SiO_2$ multilayer films doped by B or P were fabricated and annealed at high temperatures for the activated doping of B and P. The distributions of doping elements were analyzed by SIMS. Boron found to be preferentially distributed in Si layer rather than the $SiO_2$ layer. Especially the B in the Si layers was separated to two components of an interfacial component and a central one. The central component was understood as the activated elements. On the other hand, phosphorus did not show any preferred diffusion.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.37-40
• /
• 2004

We investigated the effects of impurity doping on the electrical transport and magnetic properties of TEX>$(Ru, Sn)(Sr, La)<_2$$EuCeCu_2$$O_{z}$ samples. We found that Sn substitution fur Ru causes a significant decrease of the volume fraction of ferromagnetic phase, as well as a decrease of the temperature where the ferromagnetic component is observed. La substitution for Sr leads to an increase of the magnetic ordering temperature with a moderate change of ferromagnetic component. The experimental results are discussed in conjunction with the structural data, transport properties and a possible change of oxygen content.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.194.1-194.1
• /
• 2015

Transition metal dichalcogenide (TMD) with layered structure, has recently been considered as promising candidate for next-generation flexible electronic and optoelectronic devices because of its superior electrical, optical, and mechanical properties.[1] Scalability of thickness down to a monolayer and van der Waals expitaxial structure without surface dangling bonds (consequently, native oxides) make TMD-based thin film transistors (TFTs) that are immune to the short channel effect (SCE) and provide very high field effect mobility (${\sim}200cm^2/V-sec$ that is comparable to the universal mobility of Si), respectively.[2] In addition, an excellent photo-detector with a wide spectral range from ultraviolet (UV) to close infrared (IR) is achievable with using $WSe_2$, since its energy bandgap varies between 1.2 eV (bulk) and 1.8 eV (monolayer), depending on layer thickness.[3] However, one of the critical issues that hinders the successful integration of $WSe_2$ electronic and optoelectronic devices is the lack of a reliable and controllable doping method. Such a component is essential for inducing a shift in the Fermi level, which subsequently enables wide modulations of its electrical and optical properties. In this work, we demonstrate n-doping method for $WSe_2$ on poly-4-vinylphenol and poly (melamine-co-formaldehyde) (PVP/PMF) insulating layer and adjust the doping level of $WSe_2$ by controlling concentration of PMF in the PVP/PMF layer. We investigated the doping of $WSe_2$ by PVP/PMF layer in terms of electronic and optoelectronic devices using Raman spectroscopy, electrical measurements, and optical measurements.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.203-207
• /
• 2018

In this work, we investigate the effects of lithium doping on the electric performance of solution-processed n-type zinc tin oxide (ZTO)/p-type silicon carbide (SiC) heterojunction diode structures. The proper amount of lithium doping not only affects the carrier concentration and interface quality but also influences the temperature sensitivity of the series resistance and activation energy. We confirmed that the device characteristics vary with lithium doping at concentrations of 0, 10, and 20 wt%. In particular, the highest rectification ratio of $1.89{\times}107$ and the lowest trap density of $4.829{\times}1,022cm^{-2}$ were observed at 20 wt% of lithium doping. Devices at this doping level showed the best characteristics. As the temperature was increased, the series resistance value decreased. Additionally, the activation energy was observed to change with respect to the component acting on the trap. We have demonstrated that lithium doping is an effective way to obtain a higher performance ZTO-based diode.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.137-144
• /
• 2009

In this study, quantitative and pattern recognition analyses for the quality evaluation of Herba Epimedii using HPLC was developed. For quantitative analysis, five major bioactive constituents, hyperin, epimedin A, epimedin B, epimedin C, and icariin were determined. Analysis was carried out on Capcell pak $C_{18}$ column ($250{\time}4.6$ mm, 5 ${\mu}m$) with a mobile phase of mixture of acetonitrile and 0.1% formic acid, using UV detection at 270 nm. The linear behavior was observed over the investigated concentration range (2-50 ${\mu}g/mL;\;r_2\;>$ 0.99) for all analytes. The intraand inter-day precisions were lower than 4.3% (as a relative standard deviation, RSD) and accuracies between 95.1% and 104.4%. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of one reference sample. The RSD of intra- and inter-day variation of relative retention time (RRT) and relative peak area (RPA) of the 12 selected common peaks were below 0.8% and 4.7%, respectively. The developed methods were applied to analysis of twenty Herba Epimedii extract samples. Contents of hyperin, epimedin A, epimedin B, epimedin C, and icariin were calculated to be 0$\sim$0.79, 0.69$\sim$1.91, 0.93$\sim$9.58, 0.65$\sim$3.05, and 2.43$\sim$11.8 mg/g dried plant. Principal component analysis (PCA) showed that most samples were clustered together with the reference samples but several apart from the main cluster in the PC score plot, indicating differences in overall chemical composition between two clusters. The present study suggests that quantitative determination of marker compounds combined with pattern-recognition method can provide a comprehensive approach for the quality assessment of herbal medicines.

• Journal of the Korean Data and Information Science Society
• /
• 제25권3호
• /
• pp.567-578
• /
• 2014

이 연구는 Rasch 모형을 적용하여 우리나라 엘리트 선수의 도핑 사고성향 분석을 위한 PEAS의 타당도를 검증하는데 목적이 있다. PEAS (performance enhancement attitude scale)는 Petroczi (2006)이 제시한 선수들의 도핑 (doping)에 대한 사고방식과 성향을 측정하는 척도로 17문항 6점 척도로 구성되어 있다. 국가대표 엘리트 선수 438명을 대상으로 측정하였고, Rasch 모형을 적용하여 타당도를 분석하였다. 우선 Rasch 모형의 기본가정인 일차원성을 검증하기 위해 SPSS 프로그램을 적용하여 주성분분석을 실시하였다. 문항의 적합도 검증과 측정척도 범주의 타당도, 그리고 성별에 따른 차별기능문항을 추출하기 위해 Winsteps 프로그램을 이용하였다. 분석에 모든 유의수준은 .05로 설정하였다. 자료분석 결과는 다음과 같다. 첫째, 총 17문항으로 구성된 PEAS는 일차원성을 만족하는 것으로 나타났다. 둘째, 응답범주 수의 타당도는 6점척도보다 5점척도가 더 적합한 것으로 나타났다. 셋째, 문항의 적합도는 17문항 중 7문항 (문항1, 문항9, 문항10, 문항12, 문항13, 문항14, 문항17)이 통계적으로 적합하지 못한 것으로 나타났다. 넷째, 성별에 따른 차별기능문항 분석 결과 3문항 (문항3, 문항12, 문항13)이 추출되었다. 따라서 이 연구에서 우리나라 엘리트 선수의 도핑 사고성향분석을 위한 PEAS는 9문항 5점척도가 타당한 것으로 구명되었다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.538-548
• /
• 2003

We studied effects by Re$_2$O$_3$(R=Dy, Gd, Ho) addition on the properties of Mn-Zn ferrite. The doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ceramics. With increasing the rare earth oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. In case of excessive addition of additive beyond some level, initial permeability properties of ferrite have gone down in spite of anomalous grain. With increasing the content of additive, both the real and imaginary component of complex permeability and the magnetic loss (tan$\delta$) increased. Because the increased rate of real component had higher than imaginary component, magnetic loss increased none the less for increasing the real component related with magnetic permeability. But, the magnetic loss of ferrite doped with the rare earth oxides was lower than that of Mn-Zn ferrite at any rate. The small amount of present rare earth oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary. It was seem to be due to the formation of mutual reaction such as between iron ions and rare earth element ions.

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.10-15
• /
• 2015

Cu doping by copper or $Cu_2Te$ materials enhances p+ formation in CdTe near the back contact interface, allowing better formation of ohmic contact. However, the Cu in CdTe junction is also considered as a principal component of CdTe cell degradation. In this paper, Na-doped ZnTe layer was employed as a back contact material to improve the stability of CdTe solar cells. As a process variable, post $CdCl_2$ treatment of CdS/CdTe film was conducted before or after depositing ZnTe:Na on CdTe. The change of the photovoltaic properties of CdTe cells were investigated with aging time. Low-temperature photoluminescence analysis was conducted to describe the degradation mechanism. The result showed that the CdTe solar cells with better stability compare to Cu contact were achieved using an optimized ZnTe:Na back contact.