• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.7-12
• /
• 2008

Today, manufacturers are forced to acknowledge that the life cycles of products are becoming shorter. In the case of the door trim assembly field, the highly frequent introduction of new products and the continuous increase in product varieties leads to the demand for redesigning assembly systems more often. Modular manufacturing systems can be an important issue in helping to overcome these problems. This paper presents the development of a modular assembly system for the door trim, and because it takes the change drives into consideration, this system is highly flexible in adapting to changes in the environment.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1691-1707
• /
• 2009

These days, environment has became more and more important global issues including Climate Change Convention which 40 developed countries have to decrease CO2 emission by 5.2% compared with 1990 emission. Rail transport in Korea are becoming more important as a solution for environment and energy owing to high energy consumption country. Rail transport is environment-friendly mode compared with truck mode (energy consumption 14.2 times, CO2 emission 13.4 times), but it has door-to-door problem and "DMT transport system for rail logistics" can be a solution for this problem and this system can lead to environment-friendly transport mode by rail. This study will review the background of worldwide and Korean DMT system, customers' needs, and analyze transport cost with other transport mode. Through theses kinds of review and analysis, this study will propose DMT terminal, DMT rolling stock, and DMT operation system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.748-754
• /
• 2006

Small Rapid Transit System(SRTS) will be defined fully automated urban transit system providing a rapid and personalized door to door transport service. Conventional forms of public transit require passengers to collect in groups until a large vehicle is scheduled to travel on predetermined routes. In contrast, SRTS offers personal transport with no waiting, and takes passengers non-stop to their chosen destination. This is a transport system which is as convenient as, or in congested environments more convenient than, the car, but with minimal environmental impact. Accordingly the foundation study of choice system size for development of SRTS

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.57-70
• /
• 2006

Location Based Service (LBS) provides high-value added service to users and various works about IBS have been actively performed. The core technology or LBS is positioning of the users. In the field of positioning, outdoor positioning and indoor positioning are developed separately. We are proposing a design of an outdoor-indoor positioning system, implementing a prototype of the system, and verifying the usefulness of the system through experiments. Our experimental results shows that the average error of our system is 4.8 m in the case of out-door positioning and it is 3.3 m in the case of in-door positioning.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1320-1328
• /
• 2016

In this paper, we propose a novel security system using hand gesture recognition. Proposed system does not create a password as numbers, but instead, it creates unique yet simple pattern created by user's hand movement. Because of the fact that individuals have different range of hand movement, speed, direction, and size while drawing a pattern with their hands, the system will be able to accurately recognize only the authorized user. To evaluate the performance of our system, various patterns were tested and the test showed a satisfying result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.493-498
• /
• 2017

Recently, traffic data is analyzed for efficiency of bus operation, D2D(: Door to Door) service, and self-driving of public transportation. However, various studies have been carried out to predict the delay time of public transportation, especially buses, but the research to date has been insufficient due to limitations of simple analysis and data acquisition. In this study, delay time estimation is performed by collecting and processing data such as day of the week, weather, and time of day based on bus operation information. The proposed method in this paper can be applied to autonomous public transport and public traffic control system by improving the accuracy by adding variables in the future.

• The Journal of Korean Physical Therapy
• /
• v.20 no.2
• /
• pp.43-48
• /
• 2008

Purpose: The purpose of this study is to investigate the importance of grade decision and role of physical therapist which follows enforcement of elderly long-term residential care insurance system. Methods: One of the data from grade decision meeting in Bukgu, Busan on 2007 which was 88 case of attached finding of doctor was compared with findings of visited investigator. Result: Eighty-four investigation subjects had 186 diseases that included stroke and arthritis, requiring the need for physical therapeutic approaches. In addition, the results of the door-to-door research project in the northern district of Busan showed that there was no match out of 88 subjects who submitted the viewpoint of the doctor. Such a result was produced as the doctors did not diagnose the patient directly, but rather the diagnoses were obtained from guardians and a door-to-door researcher who had a poor understanding of geriatric motion and function. Conclusion: To enforce long-term care successfully, a re-investigation should be performed for the welfare of the aged.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1681-1688
• /
• 2011

The platform screen door open-close mechanisms at today's subway are divided by "Radio Frequency method" and "Method at entrance perception sensor". In the case of "method at entrance perception sensor", there happen a lot of occasions of malfunctioning that may cause problems in terms of timeliness, swiftness and reliability of train operation and even ends up to train operation stop since the perceiving process is complicated and it is prone to have dust on lenses, position alteration by train vibration, and less reflection light in the case of new train. In this study, we find how to minimize possible problems in terms of maintenance during train operation period, and seek its alternatives in order not only to have no malfunction in perception but also to cause no disturbance in train operation through dealing organically when perceiving door open-close to minimize delay time.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.36-42
• /
• 2005

A study on fire phenomena in a subway transit mass station has been carried out as a part of disaster prevention plan at the subway station. The ventilation facilities installed in both the platform and the trackway are designed to convert into a smoke exhaust system in emergency situation, creating an environment necessary for evacuation. 3 dimensional Numerical Simulations based on the CFD are carried out using a simulation tool, Fire Dynamic Simulator. Total of six different cases are made and performances are compared each other to find optimal vents operation to ensure safer environment for evacuation at the platform area considering the installation of platform screen door.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.138-144
• /
• 2011

The design flexibility and robustness have become key factors to handle various sources of uncertainties at the early phase of design. Even though designers are uncertain about which single values to specify, they usually have a preference for certain values over others. In the first and second reports of a four-part paper, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer's preference, and its effectiveness has been illustrated with a simple vehicle side-door impact beam design problem. This report presents the applicability of the proposed design approach to the large-scale multi-objective design optimization with a successful implementation of real vehicle side-door structure design.