• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.47-56
• /
• 2008

The flow behind the variable area nozzle which corresponds to the flow at the leading edge of the impeller was measured with a 3-hole yaw probe and calculated with CFD. Two nozzle throat-areas were investigated. One is the smallest and the other is the largest opening for the variable nozzle. Test results agreed with the calculated results qualitatively. The leakage flow through the tip clearance of the nozzle vane significantly affected the flow field downstream of the nozzle vane with the smallest opening. However, the effect on leakage flow on the flow field downstream of the nozzle vane with the largest opening was very weak and the effect of wake is dominant.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.525-533
• /
• 2022

In this study, in order to numerically analyze the heat flow characteristics in the valve according to the opening rate for the solenoid valve for hydrogen supply applied to the hydrogen storage tank, flow characteristics were comparatively analyzed. Through the analysis of pressure and temperature distributions within the valve according to the high-pressure supply condition of 70 MPa or more, the heat flow characteristics in the valve, inlet and outlet passage according to the opening rate of the valve were identified. As a result a sudden change in the fluid behavior appears in the neck region of the valve, and it is understood that the flow separation caused by the flow path shape of the expanded tube has a dominant influence on the flow characteristics. And, it was confirmed that the shape of the valve seat is a factor significantly affecting the improvement of flow rate and differential pressure performance.

• 한국측량학회지
• /
• 제36권4호
• /
• pp.213-221
• /
• 2018

한국은 그동안 분단국가라는 특수성으로 인해 안보 확보를 이유로 지도데이터의 국외개방을 제한하여 왔다. 그러나 공간정보 국외개방과 관련된 국내외 환경과 ICT 산업 생태계가 급격하게 변화하고 있으므로 계속해서 개방을 제한하는 데는 한계가 있다. 이에 본 연구에서는 시스템 사고를 활용하여 공간정보 국외개방과 관련된 변수들이 시간의 흐름에 따라 어떻게 변화하고 상호작용하는지 인과관계를 분석하였다. 먼저 국가안보, 지도기반 융 복합서비스, 기업간 경쟁 측면으로 구분하여 부문별 인과지도를 작성하였다. 이를 통합한 전체 인과지도를 바탕으로 정책개입 지점과 지배적 피드백루프를 파악하였다. 분석결과에 의하면, 국내 공간정보사업자의 자생력 확보가 전체 인과지도의 정책지렛대로 작용하며, 지배적 피드백루프를 악순환고리에서 선순환고리로 전환시키는 변수는 '지도데이터의 국외개방 결정'인 것으로 나타났다. 본 연구는 주요 변수간의 상호작용 관계를 인과지도로 작성하여 적은 투입으로 큰 효과를 볼 수 있는 정책 개입지점인 정책지렛대를 찾아내고, 장기적으로 어떠한 인과구조가 시스템을 지배하게 될 것인지 지배적 피드백루프를 파악하고 분석하였다는데 의의가 있다. 이러한 연구결과는 추후 구글 또는 여타 글로벌 기업이 공간정보 국외반출을 요청할 경우에 지도데이터의 국외반출이 국가 안보와 공간정보 산업 분야에 미치는 영향과 상호작용을 논의하는데 활용될 수 있다.

• 한국강구조학회 논문집
• /
• 제30권1호
• /
• pp.37-48
• /
• 2018

이 연구에서는 원형 개구부가 있는 전단지배 하이브리드 강재 연결보의 내진성능을 평가하기 위해 탑-시트 앵글이 있는 실험체 3개(SCB1, SCB2, SCB3)와 앵글이 없는 실험체 1개 (SCB4) 등 총 4개의 강재 연결보 시스템에 대한 반복가력 실험이 수행되었다. 실험변수는 웨브 개구부의 크기, 즉 전단강도비이다. SCB1, SCB2, SCB3, 그리고 SCB4 실험체의 전단강도비(웨브 개구부 크기)는 0.34(300mm), 0.49(268mm), 0.78(200mm), 그리고 0.34(300mm)이다. 실험결과, 제안된 연결보 시스템은 우수한 변형능력과 강성을 보여주었다. 실험연구를 통해 하이브리드 강재 연결보 시스템에 적용가능한 설계전단강도를 제안하였다. 연결보의 전단강도가 소성전단강도의 50% 이하일 때 핀칭이 완화되는 것으로 나타났으며, 이로 인해 내진 성능이 향상되는 것으로 나타났다. 핀칭을 최소화하고, 내진성능을 향상시키기 위해서는 연결보 구조설계 시 연결보의 전단강도를 50% 이상 저감시키는 방안도 고려될 수 있을 것으로 판단된다.

• Wind and Structures
• /
• 제16권1호
• /
• pp.1-23
• /
• 2013

The wind-induced transient response of internal pressure following the creation of a sudden dominant opening during the occurrence of high external pressure, in low-rise residential and industrial buildings was numerically investigated. The values of the ill-defined parameters namely the flow contraction coefficient, loss coefficient and the effective slug length were calibrated by matching the analytical response with the computational fluid dynamics predictions. The effect of a sudden i.e., "instantaneously created" windward opening in the Texas Technical University (TTU) test building envelope was studied for two different envelope flexibility-leakage combinations namely: (1) a quasi-statically flexible and non-porous envelope and (2) a quasi-statically flexible and porous envelope. The responses forced by creating the openings at different time leads/lags with respect to the occurrence of the peak external pressure showed that for cases where the openings are created in close temporal proximity to the peak pressure, the transient overshoot values of internal pressure could be higher than the peak values of internal pressure in the pre-sequent or subsequent resonant response. In addition, the influence of time taken for opening creation on the level of overshoot was also investigated for the TTU building for the two different envelope characteristics. Non-dimensional overshoot factors are presented for a variety of cavity volume-opening area combinations for (1) buildings with rigid/quasi-statically flexible non-porous envelope, and (2) buildings with rigid/quasi-statically flexible and porous envelope (representing most low rise residential and industrial buildings). While the factors appear slightly on the high side due to conservative assumptions made in the analysis, a careful consideration regarding the implication of the timing and magnitude of such overshoots during strong gusts, in relation to the steady state internal pressure response in cyclonic regions, is warranted.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.93-98
• /
• 2010

An object of this study is to confirm the opening amount of the throttle valve that is begun the temperature separation of vortex tube for various engine speed and load condition in a common rail diesel engine. The vortex tube located at downstream of the exhaust manifold is a device separating the incoming exhaust gas to hot and cold stream. To find optimum separation efficiency of vortex tube, the opening amount of throttle valve has been investigated for various engine speed and load conditions. Engine speed was found that the influence of engine speed was dominant compared with that of engine load. As engine speed was increased, the throttle opening amount starting temperature separation was reduced.

• 대한인간공학회지
• /
• 제27권3호
• /
• pp.61-69
• /
• 2008

The purpose of this study was to examine the effects of sensibility and compatibility from function sounds of mobile phones. For this purpose, the present study extracted sensibility adjectives and carried out sensibility evaluation to identify the sensibility factors in the function sounds of mobile phones. And 65 sound sources out of six categories were investigated for 27 subjects. The result showed that two dominant sensibility factors were the duration and the melody pattern of the sound sources. The compatibilities of opening and closing sounds were evaluated lowly with short duration and quick tempo. Especially, the most of the subjects preferred more attractive and longer opening sounds than other function sounds. Another finding was that the short sounds with melodies were preferred for cancellations and alerts, unliked the commonly used sound sources in industry and other traditional electronic products.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.61-64
• /
• 2006

A common form of construction for apartment buildings consists of walls and coupling element. But, the structural behavior of coupling element are very complex and affected by the properties of coupling element. The propose of this paper is to evaluation the behavior of coupling element in wall-dominant system. An 1/2 scale three specimens was constructed and under cyclic loads. The specimen was consisted of opening walls and coupling element as well as floor slabs. From the result of this study, in coupling slabs, the stresses were not uniform across the width. And the effective width of coupling slabs was found smaller than the that of predicted from previous studies.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.106-112
• /
• 2017

The present study describes flow induced noise generated from a ball valve used for a gas pipeline. Noise generation from a ball valve mainly induces by interference between unstable(or fluctuating) leakage flow and pipe wall when the ball valve is working closed or opened. To measure the positions of the noise source and the amplitude of noise with respect to measuring frequencies, a commercial acoustic camera is introduced. Noise characteristics generated by the ball valve have been performed by four valve opening rates: 30, 50, 70 and 100 percents. It is noted that 100 percent opening rate means that the valve is fully opened. Throughout the experimental measurements using the acoustic camera, the location of the noise source and the noise amplitude with respect to the frequencies for the test ball valve are clearly evaluated. It is found that the dominant frequencies come from the fluctuating flow at the downstream of the ball valve for four opening rates are observed between 3,000Hz and 3,200Hz. Maximum noise amplitude comes from the ball valve reaches 75dB at the valve opening rate of 50 percent.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.207-221
• /
• 2023

In this investigation, the interaction between opening space and neighboring joint has been examined by experimental test and Particle flow code in two dimension (PFC2D) simulation. Since, firs of all PFC was calibrated using Brazilian experimental test and uniaxial compression test. Secondly, diverse configurations of opening and neighboring joint were provided and tested by uniaxial test. 12 rectangular sample with dimension of 10 cm*10 cm was prepared from gypsum mixture. One quarter of tunnel and one and or two joint were drilled into the sample. Tunnel diameter was 5.5 cm. The angularities of joint in physical test were 0°, 45° and 90°. The angularities of joint in numerical simulation were 0°, 30°, 60°, -30°, -45°, -60° and its length were 2cm and 4cm. Loading rate was 0.016 m/s. Tensile strength of material was 4.5 MPa. Results shows that dominant type of crack which took place in the model was tensile cracks and or several shear bands develop within the model. The Final stress is minimum in the cases where oriented angle is negative. The failure stress decrease by decreasing the joint angle from 30° to 60°. In addition, the failure stress decrease by incrementing the joint angle from -30° to -60°. The failure stress was incremented by decreasing the number of notches. The failure stress was incremented by decreasing the joint length. The failure stress was incremented by decreasing the number of notches. Comparing experimental results and numerical one, showed that the failure stress is approximately identical in both conditions.