• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.57-69
• /
• 2022

Recently, as interest in self-driving cars has increased worldwide, research and development on the Advanced Driver Assist System is actively underway. Among them, the purpose of Adaptive Cruise Control (ACC) is to minimize the driver's driving fatigue through the control of the vehicle's longitudinal speed and relative distance. In this study, for the research of the ACC test in the real environment, the real-road test was conducted based on domestic-road test scenario proposed in preceding study, considering ISO 15622 test method. In this case, the distance measurement method using the dual camera was verified by comparing and analyzing the result of using the dual camera and the result of using the measurement equipment. As a result of the comparison, two results could be derived. First, the relative distance after stabilizing the ACC was compared. As a result of the comparison, it was found that the minimum error rate was 0.251% in the first test of scenario 8 and the maximum error rate was 4.202% in the third test of scenario 9. Second, the result of the same time was compared. As a result of the comparison, it was found that the minimum error rate was 0.000% in the second test of scenario 10 and the maximum error rate was 9.945% in the second test of scenario 1. However, the average error rate for all scenarios was within 3%. It was determined that the representative cause of the maximum error occurred in the dual camera installed in the test vehicle. There were problems such as shaking caused by road surface vibration and air resistance during driving, changes in ambient brightness, and the process of focusing the video. Accordingly, it was determined that the result of calculating the distance to the preceding vehicle in the image where the problem occurred was incorrect. In the development stage of ADAS such as ACC, it is judged that only dual cameras can reduce the cost burden according to the above derivation of test results.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.277-296
• /
• 2023

The South Korean ethnic diaspora US lobby shows efficacy as an interest group in generating influence in American foreign and domestic public policy making. The persuasive portrayal of South Korea as a critical Cold War US ally reinforced US amenability to pro-South Korea lobbying. Also, the South Korean US diaspora is a comparatively recent immigrant group, thus its lingering resistance to assimilation facilitates its political mobilization to lobby the US government. One source of this influence includes the foundational legacy of proselytizing Western and particularly American religious social movement representatives in Korean religiosity and society. US protestant Christianity acquired a strong public association with emerging Korean nationalism in response to Japanese imperialism and occupation. Hostility towards Japanese colonialism followed by the threat from Soviet-sponsored, North Korean Communism meant Christianity did not readily become a cultural symbol of excessive external, US interference in South Korean society by South Korean public opinion. The post-Cold War shift in US foreign policy towards targeting so-called rogue state vestiges of the Cold War including North Korea enhanced further South Korea's influence in Washington. Due to essential differences in the perceived historical role of American influence, extrapolation of the South Korean development model is problematic. US hegemony in South Korea indicates that perceived alliance with national self-determination constitutes the core of soft power appeal. Civilizational appeal per se in the form of religious beliefs are not critically significant in promoting American polity influence in target polities in South Korea or, comparatively, in the Middle East. The United States is a perceived opponent of pan-Arab nationalism which has trended towards populist Islamic religious symbolism with the failure of secular nationalism. The pronounced component of evangelical Christianity in American core community nationalism which the Trump campaign exploited is a reflection of this orientation in the US.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.4
• /
• pp.143-156
• /
• 2023

The domestic threat information sharing system to deal with various security threats in the rapidly changing cyber environment needs to be improved. In this study, to solve these problems and promote the activation of threat information sharing, we derive a research model based on the value-based containment model (VAM) for vital factors in information sharing. After conducting a Ricardian 5-point survey on a total of 204 individuals, the statistical results of the first 151 individuals were analyzed using SPSS and AMOS, and the statistical results of the second 204 individuals were analyzed using R-Studio. As a result, perceivability was found to have a significant impact as a core factor in the activation of cyber threat information sharing (β=0.405, p<0.01), and the hindrance factor was analyzed as innovation resistance (β=-0.152, p<0.01). Microscopically, the obtained results can be applied to factor analysis for activating information sharing of cyber threats by companies in the future, and macroscopically, they can contribute to the foundational development of a national cyber threat response system.

• Korean Journal of Ecology and Environment
• /
• v.55 no.1
• /
• pp.19-34
• /
• 2022

This study was identified the distribution of vegetation in domestic estuaries and analysed the relationship with environmental fcators based on the health assessment data of the estuary ecosystem surveyed between 2016 and 2018. Of the 325 estuaries surveyed, 187 vegetation communites were investigated in 300 estuaries and 53 halophyte communites accounted for 28.3%. No vegetation distribution was found in the other 25 estuaries. Considering the circulation of estuary, 41 halophyte communites were investigated in open estuaries and 26 halophyte communites in closed estuaries. As a result of canonical correlation analysis (CCA) between the entire distributed vegetation community and environmental factors, salinity (conductivity), T-N, and T-P concentrations were strongly correlated. Among the riverbed material materials of the estuary, the composition ratio of silt, sand, and pebble was the most correlated. Therefor, it is estimated that the distribution location of the halophyte communites were differentiated by being influenced by the sea ares, estuary circulation type, resistance to salinity and riverbed material ratio.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.37-45
• /
• 2024

Molybdenum is used in various industries because of its high heat and corrosion resistance. It was selected as a critical mineral in Korea. However, there have been recent challenges in production because of the increased depth and decreased grade of molybdenum veins. Consequently, it is necessary to enhance the effectiveness of the molybdenum beneficiation process. In this study, a basic evaluation of beneficiation characteristics was conducted to enhance the effectiveness of the domestic molybdenum ore beneficiation process. The properties of the beneficiation process were assessed using mineralogical analysis, work index, and flotation kinetics. The results revealed that the allowable particle size of the molybdenum ore for liberation was ~100 ㎛. In addition, the work index was calculated to be 14.57 kWh/t. The operating conditions in the flotation units were achieved by determining the optimal flotation time for each process based on flotation kinetics. Finally, the characteristics of molybdenum ore beneficiation provided in this study can be utilized to diagnose the grinding and flotation processes of large-scale molybdenum beneficiation plants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.195-202
• /
• 2006

Deterioration of sewer concrete is representative that biochemical corrosion according to the $H_2S$ has growth by inhabit sulfur-oxidzing bacteria because of special environment in sewer. But in case of domestic, fundamentally, sulfur-oxidzing bacteria could moderate development of repair material method is need because of corrosion prevent method is inconsideration with carry out to improve project. In this paper, after development of spread type antibiotic with antibio-metal, antibacterial performance about sulfur-oxidzing bacteria of antibiotic and tested to estimate fundamental properties of bonding strength, abrasion contents, contents of water absorption, contents of air permeability, carbonation depth, chloride ion penetration depth and chemical resistance of spread with antibiotic restorative mortar.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.3
• /
• pp.101-120
• /
• 2024

Purpose : This study aimed to carry out a scoping review to investigate the research trends in non-pharmacological interventions for physical rehabilitation following breast cancer treatment. Methods : A scoping review was conducted according to the five steps outlined by Arksey and O'Malley and PRISMA-ScR. We searched three domestic databases (ScienceOn, Riss, KCI) and two international databases (PubMed, Cochrane Central) between January 2014 and April 2024. The keywords used were 'breast cancer surgery', 'breast cancer treatment', 'breast cancer lymphedema', 'intervention', 'management', 'therapy', 'disorder', and 'dysfunction'. Results : In terms of publication, the number of studies in the past five years has increased compared to the previous five years, with most studies focusing on patients aged 41 to 60 and who underwent surgical treatment for breast cancer. A total of 43 different types of non-pharmacological interventions were applied: 21 single interventions and 22 combination interventions. Among the intervention methods, complete decongestive treatment (CDT), resistance training, and manual lymphatic drainage were the most frequently utilized. The most common duration of intervention turned out to be 4~5 weeks and more than 8 weeks, with frequencies of 2~3 sessions per week and more than 4 sessions per week. The most frequently used dependent variables included range of motion (ROM) and disabilities of the arm, shoulder and hand (DASH) for the function and disorder of the upper limb category; arm circumference or volume and bio-impedance for the lymphedema category; visual analogue scale (VAS) and numerical rating scale (NRS) for the pain category; and the European organization for research and treatment of cancer quality of life questionnaire breast cancer module (EORTC QLQ) and functional assessment of cancer therapy-breast (FACT-B) for the quality of life category. Conclusion : The findings of this scoping review provide valuable mapping data for non-pharmacological interventions for physical rehabilitation following breast cancer treatment. We recommend further research, particularly systematic reviews and meta-analyses, to build upon these findings.

• Korean Security Journal
• /
• no.36
• /
• pp.255-292
• /
• 2013

Burglary (also called breaking and entering and sometimes housebreaking) is a crime, the essence of which is illegal entry into a building for the purposes of committing an offence. It is one of the most common types of crime and also a serious issue for every society. A house that is left insecure is an accessible and attractive target for burglars and therefore burglary resistance test & certification system for doors and windows has been developed in many countries. This paper explores several advanced foreign burglary resistance test/certifcation cases (the British SBD, the Dutch KOMO SKH/SKG, the Japanese CP mark, the Australian Standard Certification) for security products and domestic test/certification systems for fire safety products as a comparative study so that any improvement points can be gained for South Korea in the field of security product performance. The comparative analysis results show that South Korea is far behind the security product certification system and needs a lot of improvement in the system by benchmarking foreign cases. The domestic test/certification systems for fire safety products also give some insights for burglary-related security products' performance certification system in Korea. Overall, the need for relevant rules and regulations, the establishment of standards regarding testing and certification, including certified security +hardware product in building security certification system, performance testing as well as production testing (i.e. quality management system evaluation), the basic competency of testers, incentive system for certified/high quality security products were suggested in order to make an optimal model for the security production performance testing and certification system in Korea.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.543-553
• /
• 2023

The current status of domestic a agalmatolite mines in South Korea was investigated with a view to establishing a stable supply of agalmatolite and managing its demand. Most mined agalmatolite deposits were formed through hydrothermal alteration of Mesozoic volcanic rocks. The physical characteristics of pyrophyllite, the main constituent mineral of agalmatolite, are as follows: specific gravity 2.65~2.90, hardness 1~2, density 1.60~1.80 g/cm³, refractoriness ≥29, and color white, gray, grayish white, grayish green, yellow, or yellowish green. Among the chemical components of domestic agalmatolite, SiO₂ and Al₂O₃ contents are respectively 58.2~67.2 and 23.1~28.8 wt.% for pyrophyllite, 49.2~72.6 and 16.5~31.0 wt.% for pyrophyllite + dickite, 45.1 and 23.3 wt.% for pyrophyllite + illite, 43.1~82.3 and 11.4~35.8 wt.% for illite, and 37.6~69.0 and 19.6~35.3 wt.% for dickite. Domestic agalmatolite mines are concentrated mainly in the southwest and southeast of the Korean Peninsula, with some occurring in the northeast. Twenty-one mines currently produce agalmatolite in South Korea, with reserves in the order of Jeonnam (45.6%) > Chungbuk (30.8%) > Gyeongnam (13.0%) > Gangwon (4.8%), and Gyeongbuk (4.8%). The top 10 agalmatolite-producing mines are in the order of the Central Resources Mine (37.9%) > Wando Mine (25.6%) > Naju Ceramic Mine (13.4%) > Cheongseok-Sajiwon Mine (5.4%) > Gyeongju Mine (5.0%) > Baekam Mine (5.0%) > Minkyung-Nohwado Mine (3.3%) > Bugok Mine (2.3%) > Jinhae Pylphin Mine (2.2%) > Bohae Mine. Agalmatolite has low thermal conductivity, thermal expansion, thermal deformation, and expansion coefficients, low bulk density, high heat and corrosion resistance, and high sterilization and insecticidal efficiency. Accordingly, it is used in fields such as refractory, ceramic, cement additive, sterilization, and insecticide manufacturing and in filling materials. Its scope of use is expanding to high-tech industries, such as water treatment ceramic membranes, diesel exhaust gas-reduction ceramic filters, glass fibers, and LCD panels.