• Journal of Korean Society of Steel Construction
• /
• v.27 no.4
• /
• pp.387-397
• /
• 2015

The domestic fire resistance performance test is conducted as a prescriptive design method such as quality test. In quality test there are 2 methods, unloaded fire resistance test and fire resistance test under load. In realistic, these tests, however, have problems with expense, time and diversity of structure. This study reviewed fire resistance performance of H-beam flexural member by thermal stress analysis using finite element ABAQUS program. This research is for the performance-based design reviewing applicability of domestic standard. As a result of this study, limit temperatures per each load ratio provied for proper performance of fire resistancy.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.6
• /
• pp.5-11
• /
• 2015

Recently the necessity of developing the Load and Resistance Factor Design (LRFD) for shallow foundation has been raised to implement to the domestic design codes related to geotechnical engineering since the limit state design is requested as international technical standard for the foundation of structures. In this study, applicability of LRFD for shallow foundation on weathered soils was investigated and resistance factor for this case was proposed. The quantitative analyses on the uncertainty and resistance bias for shallow foundation on weathered soil ground were performed by collecting the statistical data about domestic case studies for design and construction of shallow foundation. Reliability analyses for shallow foundation were first performed using FDA (First-order Design value Approach) method. Resistance factors were calibrated using the load factors obtained from the specifications of shallow foundations on weathered soil ground. The influence of the load factors developed in this study on the resistance factors were discussed by comparing with the resistance factor obtained from using AASHTO load factors.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.181-190
• /
• 2021

Screw-type fasteners are widely used to make connections between wood members or between wood and steel connectors because they can tolerate the applied loads by withdrawal or shearing. In this study, we evaluated the withdrawal resistances of the screw-type fasteners and analyzed the effects of the lead-hole size, relative grain direction (tangential, radial, and cross-sections) of the wood member, screw diameter, screw type, and species. Two wood species, including domestic larch and imported spruce, and three screw-type fasteners, including domestic lag screws (diameters of 9.46, 7.79, and 6.27 mm), domestic tapping screw (diameter, 6.3 mm), and imported Sherpa screw (diameter, 8.0 mm) were used. To assess the effect of lead-hole size, the lead holes with diameters corresponding to 68.7%, 70.8%, and 74.0% of the shank diameter of the lag screw were predrilled. The lead hole corresponding to 74% of the shank diameter was selected for this study because the smaller lead holes required higher rotational force for installation, which may cause damage in the screw neck, although there was no significant difference in the withdrawal resistance depending on the lead-hole sizes applied in this study. The lag screws installed on the tangential and radial surfaces showed similar withdrawal resistances to each other, which were greater than those installed on the cross-sectional surface. As the lag screw diameter increased from 6.27 mm to 9.46 mm, the withdrawal resistance also increased proportionally. The withdrawal resistance of the tapping screw having a diameter of 6.3 mm was almost 1.6 times higher than that of the lag screw having a similar diameter of 6.27 mm, while that of Sherpa screw having a diameter of 8.0 mm was around 1.4 times higher than that of the lag screw having a similar diameter of 7.79 mm.

• Korean Journal of Veterinary Service
• /
• v.31 no.1
• /
• pp.17-29
• /
• 2008

In this study, antimicrobial resistance of E coli isolated from domestic beef on sale in Busan and Gyeongnam province was investigated from March to October 2007. A total of 600 beef samples were collected for the monitoring of antimicrobial resistance, and 92 (15.3%) strains of E coli were isolated. Antimicrobial resistance test was carried out by agar disc diffusion method with 17 antimicrobials. In general, E coli isolates showed the highest antimicrobial resistance to doxycycline (73.9%), followed by tetracycline (70.7%) andcefazolin (63.0%). Then they showed higher resistance to several antimicrobials like norfloxacin (48.9%). However, They had low antimicrobial resistance to amikacin (4.3%), colistin (1.1%). Of 92 isolates, 82 (89.1%) were resistant to more than 2 antimicrobials. Among 17 antimicrobials examined, tetracyclines were the most resistant, followed by cephalosporins, quinolone. The resistance was seemed to be correlated to amounts of antimicrobial use. In the result of this study, we suggest that there be need to regulate the abuse of antimicrobial on food-producing animals in Korea because the concern on antimicrobial resistant is gradually increased worldwide.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.217-225
• /
• 1999

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.673-680
• /
• 2022

Modular construction is recognized as a construction method with various advantages, such as shortening the construction duration, achieving quality control through factory production, ease of maintenance, and reduced construction costs due to reduced weight of materials. However, despite efforts by the modular industry and government to activate modular construction, it has rarely been established in the domestic market. Currently, there are technical limitations to the modular construction fire resisting technology applied to general buildings. The lack of access to modular construction fire resistance regulation is considered a major factor. In this study, the current status and problems with modular construction fire resistance regulation, a significant hindrance factor, were considered to activate modular construction. This study is intended to present a direction for institutional improvement in modular construction fire resistance and a direction for research and development.

• Korean Journal of Veterinary Research
• /
• v.52 no.4
• /
• pp.285-288
• /
• 2012

Salmonella I 4,[5],12:i:- was a monophasic variant of Salmonella (S.) Typhimurium and notorious for re-emerging candidate which would replace S. Typhimurium DT104 for antibiotic resistance. Recently, isolation rate was increased on human and industrial animals but there was no case in domestic animals but human in Korea. This was first isolation case from domestic animals in Korea. The five isolates from feces of duck (n = 3), chicken (n = 1), and wild bird (n = 1) showed antibiotic resistance against cephems and aminoglycosides. These means that the spread of emerging bacterial pathogens to domestic animals and the need of systemic management for Salmonella I 4,[5],12:i:-.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.69-72
• /
• 2008

This study is designed to understand changes in fire resistance performance of intumescent coating system through follow-up tests on temperature of unexposed surface for the domestic intumescent coating system by environmental testing procedure.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.61-64
• /
• 2008

Applying fire resistive coating to steel members is one of the general methods to secure fire resistance performance of steel members. And intumescent coating system is currently one of methods giving fire resistance to steel members. Intumescent coating system for fire resistance, however, has undesirable weaknesses that fire resistance performance of steel members is being deteriorated due to cracks and falling-offs of the coverings as time goes after completion of the coverings to the members. This study is designed to understand changes in fire resistance performance of intumescent coating system through follow-up tests on temperature of unexposed surface for the domestic intumescent coating system.

• Korean Journal of Veterinary Service
• /
• v.36 no.2
• /
• pp.111-119
• /
• 2013

The aim of this study was to investigate the isolation frequency and antimicrobial resistance of Escherichia coli (E. coli) and Enterococcus spp. from domestic beef and pork on sale in Seoul, Korea. A total of 106 (10.4%) E. coli and 114 (11.2%) Enterococcus spp. from 635 domestic beef and 381 pork samples were isolated and examined for susceptibility to 15 and 11 antimicrobial agents, respectively. The most frequent antimicrobial resistance observed in E. coli isolates was to ampicillin (38.6%), followed by streptocmycin (34.9%) and tetracycline (32.0%). The most frequent antimicrobial resistance in E. faecium isolates was to erythromycin (53.8%) and rifampin (46.1%), and in E. faecalis isolates was to tetracycline (55.7%) and rifampin (55.0%). Among the isolates, multi-drug resistant (MDR) E. coli and Enterococcus spp. strains showing resistances to more than two antimicrobial agents tested were 10.4% and 11.2%, respectively. As a result, appropriate protocols for antimicrobial agents and strategies to reduce antimicrobial resistance will be needed in future.