• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.1
• /
• pp.45-62
• /
• 2010

Zero plane displacement (d) is the elevated height of the apparent momentum sink exerted by the vegetation on the air. For a vegetative canopy, d depends on the roughness structure of a plant canopy such as leaf area index, canopy height and canopy density, and thus is critical for the analysis of canopy turbulence and the calculation of surface scalar fluxes. In this research note, we estimated d at the Gwangneung coniferous forest by employing two independent methods of Rotach (1994) and Martano (2000), which require only a single-level eddy-covariance measurement. In general, these two methods provided comparable estimates of $d/h_c$ (where $h_c$ is the canopy height, i.e., ~23m), which ranged from 0.51 to 0.97 depending on wind directions. These estimates of $d/h_c$ were within the ranges (i.e., 0.64~0.94) reported from other forests in the literature but were sensitive to the forms of the nondimensional functions for atmospheric stability. Our finding indicates that one should be careful in interepreation of zero plane displacement estimated from a single-level eddy covariance measurement that is conductaed within the roughness sublayer.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1E
• /
• pp.15-23
• /
• 1997

Zero-Crossings with Peak Amplitudes(ZCPA) model motivated by human auditory periphery was proposed to extract reliable features speech signals even in noisy environments for robust speech recognition. In this paper, some practical considerations for digital hardware implementations of the ZCPA model are addressed and evaluated for recognition of speech corrupted by several real world noises as well as white Gaussian noise. Infinite impulse response(IIR) filters which constitute the cochliar filterbank of the ZCPA are replaced by hamming bandpass filters of which frequency responses are less similar to biological neural tuning curves. Experimental results demonstrate that the detailed frequency response of the cochlear filters are not critical to performance. Also, the sensitivity of the model output to the variations in microphone gain is investigated, and results in good reliability of the ZCPA model.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.482-491
• /
• 2018

The practical design methodology of a three-phase dual active bridge (3ph-DAB) converter applied to low voltage direct current (LVDC) applications is proposed by using a mathematical model based on the steady-state operation. An analysis of the small-signal model (SSM) is important for the design of a proper controller to improve the stability and dynamics of the converter. The proposed lead-lag controller for the 3ph-DAB converter is designed with a simplified SSM analysis including an equivalent series resistor (ESR) for the output capacitor. The proposed controller can compensate the effects of the ESR zero of the output capacitor in the control-to-output voltage transfer function that can cause high-frequency noises. In addition, the performance of the power converter can be improved by using a controller designed by a SSM analysis without additional cost. The accuracy of the simplified SSM including the ESR zero of the output capacitor is verified by simulation software (PSIM). The design methodology of the 3ph-DAB converter and the performance of the proposed controller are verified by experimental results obtained with a 5-kW prototype 3ph-DAB converter.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.10
• /
• pp.909-919
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.23-29
• /
• 2016

Effects of cationic polyvinylamine (PVAm) dry strength agent on effectiveness of optical brightening agent (OBA) during fine papermaking and the mechanism for brightness reduction of paper by PVAm was investigated by UV/Vis spectroscopy and turbidity measurement of OBA solution with PVAm. It was shown that PVAm reduced brightness of paper while opacity was not varied and tensile strength of paper was increased. Tetra-type OBA solution showed the peaks around the wavelength of 280 nm and 330 nm and the increase in the OBA concentration increased the UV absorbance in all wavelength. Addition of PVAm into the OBA solution decreased the UV absorbance at 280 nm. Turbidities of OBA and PVAm solutions were close to zero, respectively, while the turbidity value increased for the mixed solution of OBA and PVAm in various mixing ratios and the highest value was obtained when the mixing ratio of PVAm and OBA was 5:5, meaning that cationic PVAm formed complex with anionic OBA. In conclusion, cationic PVAm could form a complex with anionic OBA and that reduced UV absorbance, resulting in the reduced brightness of paper.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.53-58
• /
• 2009

This experiment was conducted to determine the amount of asparagine content in soybean sprout soup as well as its effect on the regulation of blood alcohol concentration in human body. Asparagine content and alcohol concentration in blood were analyzed using the amino-acid analyzer and alcohol tester, respectively. Asparagine content in soybean sprout soup was highly significantly different among sprout soups sampled from different restaurants, although the boiling time and amount of sprout used were different among the samples. Significantly higher asparagine content was observed in soups with higher amounts of sprouts (2.81% in 500 grams of sprout) and 10 minutes after boiling with other solid ingredients in the soup. Lower concentration of alcohol in blood was recorded in persons with higher body weight. The asparagine+soybean extract (eaten immediately after drink) lowered the blood alcohol concentration significantly followed by only asparagine and control. The blood alcohol concentration after drinking become zero earlier (by 30 minutes), when asparagine+soybean extract or only asparagine was consumed as compared to control.

• Mycobiology
• /
• v.39 no.4
• /
• pp.317-320
• /
• 2011

Honey production from approximately 1.6 million colonies owned by about 199,000 Korean beekeepers was almost 23,000 metric tons in 2009. Nosema causes significant losses in honey production and the virus decreases population size. We initiated a survey of honey bee colonies on the blooming period of Acacia to determine the prevalence of Nosema and virus in 2011. Most Korean beekeepers have moved from the south to north of Korea to get Acacia nectar for 2 mon. This provided a valuable opportunity to sample bees originating from diverse areas in one location. Twenty hives owned by 18 beekeepers were sampled in this year. Nosema spore counts ranged from zero to 1,710,000 spores per bee. The average number of nosema spores per bee was 580,000. Approximately 95% of the colonies were infected with Nosema, based on the presence of spores in the flowering period of Acacia. This indicates that Nosema is the predominant species affecting honeybee colonies. Also, the seven most important honeybee viruses were investigated by reverse transcription-PCR. Among them, four different viruses were detected in samples. Black queen cell virus was present in all samples. Chronic bee paralysis virus was detected in 10% of samples. Deformed wing virus was present in only 5% of the samples. Prevalence of Sacbrood virus was 15%. However, Cloudy wing virus, Israel acute paralysis virus and kashmir bee virus were not detected in any of samples.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.3
• /
• pp.227-234
• /
• 2005

From published data of mature forests worldwide, Raich and Nadelhoffer suggested that total belowground carbon allocation (TBCA) could be estimated from the difference between annual rates of soil respiration and aboveground litterfall. Here we analyze new measurements of IRGA-based soil respiration and litterfall of natural mature oak forests dominated by Quercus mongolica in Korea. Rates of in situ soil respiration and aboveground litter production are highly and positively correlated. Our results disagree with the Raich and Nadelhoffer model far world forests. A regression analysis of the data from Q. mongolica forests produced the following relationship: annual soil respiration : 141 + 2.08 ${\times}$ annual litterfall. The least squares regression line has a more gentle slope (2.08) than the slope (2.92) described by Raich and Nedelhoffer for mature forests worldwide. The regression slope of our study indicates that, on average, soil respiration is about two times the aboveground litterfall-C, which further implies that TBCA is similar with annual aboveground litterfall-C at natural Q. mongolica forests in Korea. The non-zero Y-intercept (141) of the regression indicates that TBCA may be greater than litterfall-C where litterfall rate are relativery low. Over a gradient of litterfall-C ranging from 200-370 g C $m^{-2}yr^{-l}$, TBCA increased from 350-530 g C $m^{-2}yr^{-l}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.154-161
• /
• 2006

This paper describes the new types of ngative differential resistance (NDR) IC applications which use a monolithic quantum-effect device technology based on the RTD/HBT heterostructure design. As a digital IC, a low-power/high-speed MOBILE (MOnostable-BIstable transition Logic Element)-based D-flip flop IC operating in a non-return-to-zero (NRZ) mode is proposed and developed. The fabricated NRZ MOBILE D-flip flop shows high speed operation up to 34 Gb/s which is the highest speed to our knowledge as a MOBILE NRZ D-flip flop, implemented by the RTD/HBT technology. As an analog IC, a 14.75 GHz RTD/HBT differential-mode voltage-controlled oscillator (VCO) with extremely low power consumption and good phase noise characteristics is designed and fabricated. The VCO shows the low dc power consumption of 0.62 mW and good F.O.M of -185 dBc/Hz. Moreover, a high-speed CML-type multi-functional logic, which operates different logic function such as inverter, NAND, NOR, AND and OR in a circuit, is proposed and designed. The operation of the proposed CML-type multi-functional logic gate is simulated up to 30 Gb/s. These results indicate the potential of the RTD based ICs for high speed digital/analog applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.941-946
• /
• 2013

In this paper, an enhanced method for attitude determination is proposed for systems using an IMU (Inertial Measurement Unit). In attitude determination with IMU, it is generally assumed that the IMU can be located in the center of gravity on the vehicle. If the IMU is not located in the center of gravity, the accelerometers of the IMU are disturbed from additive accelerations such as centripetal acceleration and tangential acceleration. Additive accelerations are derived from the lever arm which is the distance between the center of gravity and the position of the IMU. The performance of estimation errors can be maintained in system with a non-zero lever arm, if the lever arm is estimated to remove the additive accelerations from the accelerometer's measurements. In this paper, an estimation using Kalman filter is proposed to include the lever arm in the state variables of the state space equation. For the Kalman filter, the process model and the measurement model for attitude determination are made up by using quaternion. In order to evaluate the proposed algorithm, both of the simulations and the experiments are performed for the simplified scenario of motion.