• 동의생리병리학회지
• /
• 제16권6호
• /
• pp.1211-1216
• /
• 2002

To evaluate whole-body vibration(WBV) exposure and fatigue-decreased proficiency(FDP) boundary in passenger car driver, several roads in Busan were divided into 3 types by the condition of road surface; Road 1 was partially damaged, Road 2 was normal without damage, and Road 3 was better than Road 2. The results were following: The highest passenger driver's exposures to whole-body vibration acceleration and fatigue-decreased proficiency boundary at 40km/h were 0.108m/s² and about 2099 minutes in Road 2 for xh axis, 0.134m/s² and about 1585 minutes in Road 2 for yh axis, and 0.183m/s² and about 1053 minutes in Road 2 for zh axis, respectively. The highest passenger driver's exposures to whole-body vibration acceleration and fatigue-decreased proficiency boundary at 80km/h were 0.219m/s² and about 830 minutes in Road 3 xh axis, 0.203m/s² and about 918 minutes in Road 3 for yh axis, and 0.622m/s² and about 195 minutes in Road 1 for zh axis, respectively. The highest vector sums of whole-body vibration exposure at 40km/h and 804km/h were 0.328m/s² in Road 2 and 0.730m/s² in Road 1, respectively. The highest crest factors at 40km/h were 4.25 in Road 1 for xh, 4.51 in Road 3 for yh, and 5.81 in Road 2 for zh, respectively. The highest crest factors at 80km/h were 5.57 in Road 1 for xh, 5.60 in Road 2 for yh, and 6.46 in Road 3 for zh, respectively. The highest transmissibilities of whole-body vibration from floor to seat at 40km/h and 80km/h were 0.89 in Road 3 and 0.82 in Road 3 for xh axis, 0.83 in Road 3 and 0.87 in Road 1 and 2 for yh, and 0.80 in Road 2 and 0.92 in Road 1 tor zh axis, respectively. The highest fatigue-decreased proficiency boundaries for whole-body vibration exposure of passenger car driver in floor and seat were 457 minutes in Road 3 and 583 minutes in Road 3 at 40km/h and 159 minutes in Road 2 and 251 minutes in Road 2 at 80km/h, respectively.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.233-237
• /
• 2013

이미지 인식은 패턴인식의 중요한 한 연구 분야이다. 본 논문은 이미지 세그멘테이션 알고리즘을 소개하고, 이의 응용으로 도로 Sign 인식시스템에 적용하여 그 결과를 고찰하였다. 본 논문에서, 우리는 이미지 프로세싱 기술의 도움으로 도로 Sign 의 체계적인 연구를 하였고, 이에 해당하는 알고리즘을 만들었다. 도로 Sign을 인식하기 위하여, 본 논문은 이미지 세그멘테이션 알고리즘 파트와 이미지 인식파트의 두 부분으로 나누어서 기술하였다. 인식실험은 도로 Sign 인식 알고리즘 모델이 스마트 폰에 유용하게 사용될 것과, 그 외 여러분야에 사용될 수 있음을 보여 준다.

• 건축역사연구
• /
• 제20권6호
• /
• pp.169-184
• /
• 2011

The following research of the road network of Jeju-Eupseong during Daehan Empire period has a twofold purpose: to study some characteristics of the road network at that time; and, to restore it to the original form of that period before a newly constructed road, called Shinjakro, has been established. As an attempt to trace the old shape of Jeju-Eupseong, this study analyzed some historical factors based on the first land cadastral map which was made in 1914, including outskirts of Jeju-Eupseong; such as castle itself, castle gate, road, bridge, lots of land, etc. Then this study also tried to restore the old road network of Jeju-Eupseong, through finding the original land-lot shape in the land cadastral map. There was five Shinjakro made between 1914 and 1917. The road network before then was composed of the double east-west axes and the single north-south axis. These axes was connected to some important place of the inside of Jeju-Eupseong; such as castle gates, fountains, Gaek-sa, etc. There were many branch lines between these main axes at about 80-120m intervals. Also there was an outer road along the outer wall of castle, connected with each castle gates. Especially, the north-west axis was the baseline which divided into two large parts, a government office area and non-government area (housing and commercial street for the people). Finally, this paper examines that the road network of Jeju-Eupseong was the true result for the efficient function of the city, especially considering natural geographical conditions and environment of living of that time.

• 농촌계획
• /
• 제16권3호
• /
• pp.131-141
• /
• 2010

As a basic life-supporting infra in modem life, road should carry out various functions; transport, public linear network service, open activity space. Case study villages were divided into plan-based improved one(3 subtypes) and not one(4 subtypes). On total 21 case study villages($3{\times}7$ subtypes), questionnaire surveys were performed. Villagers' satisfaction level to road conditions in the plan-based improved villages showed much higher than not improved ones, which means that improvement of village roads be a vital subject in level-up of quality of rural life. Traffic function of village roads was responded as a principal one, while other various functions as between-villagers communication, car-parking and accommodation of public utilities were also required. In this viewpoint, village roads should be multi-purposedly developed in future. So, it was concluded that the road improvement strength would vary with geographical and topographical conditions of each village. Although villagers' unsatisfaction level on road service was very high, their demand level of and supporting will toward road improvement works have continuously increased, so, it would be considered to be the very time that full-fledged village road improvement policy be initiated.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.529-536
• /
• 2003

In domestic case occurrence of cut slopes according to construction and expansion of road is necessary more than 70% of country has been consisted of mountain area. In the case of Kang-won Do, there are much mountains locals in road wiping away a disgrace and expanded and slant is connoting collapse danger of incision side by each kind calamity being urgent. When route alteration enforces disadvantageous road extension, stability examination and processing way about large slope happened are serious. During road extension work in the Kang-won DO secure stability for falling rock of road slope and failure that happen and established suitable reinforcement and countermeasure in reply in necessity. The Slope is divided rock slope and soil slope, and then in order to analysis soil slope apply LEM theory. And rock slope examined stability about stereographic projection and wedge failure. Is going to utilize in reinforcement and failure prevention if it is efficient cutting as reinterpreting stability and secure stability and wish to consider effective and robust processing plan of great principle earth and sand side, and present countermeasure inside with these data hereafter applying suitable reinforcement countermeasure about unstable section.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.745-757
• /
• 2019

Road surface deteriorations such as potholes have caused motorists heavy monetary damages every year. However, effective road condition monitoring has been a continuing challenge to road owners. Depth cameras have a small field of view and can be easily affected by vehicle bouncing. Traditional image processing methods based on algorithms such as segmentation cannot adapt to varying environmental and camera scenarios. In recent years, novel object detection methods based on deep learning algorithms have produced good results in detecting typical objects, such as faces, vehicles, structures and more, even in scenarios with changing object distances, camera angles, lighting conditions, etc. Therefore, in this study, a Deep Learning Pothole Detector (DLPD) based on the deep region-based convolutional neural network is proposed for autonomous detection of potholes from images. About 900 images with potholes and road surface conditions are collected and divided into training and testing data. Parameters of the network in the DLPD are calibrated based on sensitivity tests. Then, the calibrated DLPD is trained by the training data and applied to the 215 testing images to evaluate its performance. It is demonstrated that potholes can be automatically detected with high average precision over 93%. Potholes can be differentiated from manholes by training and applying a manhole-pothole classifier which is constructed using the convolutional neural network layers in DLPD. Repeated detection of the same potholes can be prevented through feature matching of the newly detected pothole with previously detected potholes within a small region.

• 한국광학회지
• /
• 제28권6호
• /
• pp.273-280
• /
• 2017

본 논문에서는 낮은 도로 조명을 위한 freeform reflector를 설계하였다. 높이에 비해 넓은 차선까지 배광을 보내야 하는 낮은 도로 조명의 경우, 기존의 등주식 도로 조명에 비해 균제도를 맞추기 힘들다는 단점이 있다. 조명 등급 M3를 만족시키기 위해 reflector를 part 9개로 나누어 part 별 반사면의 기울기를 변화시켜 원하는 배광을 갖도록 하였고, 각 점을 기준으로 fitted curve를 그려 이에 따른 수식을 도출하였다. LightTools의 street light simulation을 통해 M3 조명 등급에 만족하는 것을 확인하였고 직접 제작하여 실제 도로상에서 조명 등급을 만족시키며 설계 결과에 대한 타당성을 입증하였다.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.398-404
• /
• 2007

In this study, the sensitivity of annoyance was investigated by the subjective jury test for the variations of the frequency components along with various sound pressure levels of sixteen environmental noise sources. Annoyance was, also, evaluated for the road traffic noises. Sound pressure levels were $54{\sim}84\;dB$ which individually divided frequency components with eight bands of equally three bark bands. The results show that vehicle traffic noise is recognized as the most serious environment noise source. The sensitivity of human perception of annoyance in frequency bands is quite different from A-weighting curve. The annoyance found out to be more sensitive in high frequency region and reached its maximum in 3.4 kHz.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1425-1430
• /
• 2004

In this paper, the inductive power transformer using electromagnetic induction for the road/railway applied to contactless power transfer system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power transformer is used for the light railway/road transportation system. which has a large air-gap and demands a large electrical power capability. But. low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. In addition, the performance of inductive power transformer to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.