• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.127-133
• /
• 2007

Underfloor air distribution system is generally known to be more energy-saving and provide more comfort as compared with overhead air distribution system. In practice, however, some buildings to which underfloor air distribution system is applied have less effectiveness in saving energy and are getting dissatisfaction with cold draft caused by wind velocity of air distribution in terms of comfort. It is judged that such problems are due to failure to consider properties of underfloor air distribution system in applying it and identical design with the design standards for the existing overhead air distribution system. This study aims at introducing an air conditioning type of the occupied zone for underfloor all distribution system to see its effectiveness in saving energy for air conditioning of the occupied zone through a comparative simulation with the existing air conditioning type.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.266-270
• /
• 2014

In this paper, the effects of superconducting fault current limiter (SFCL) installed in power distribution system on reliability are evaluated and analyzed. The fault current will be decreased in power distribution system with SFCL because of the increased impedance of SFCL. The decreased fault current will improve the voltage drop of the bus of substation. The voltage drop is an important factor of power distribution system reliability. In this paper, improvement of reliability worth is analyzed when SFCLs are installed at the starting point in power distribution system. First, resistor-type SFCL model is used in PSCAD/EMTDC. Next, typical power distribution system is modeled. Finally, when the SFCLs with impedance 0.5 [${\Omega}$] are installed in feeder, power distribution system reliability is evaluated. Also, the improvement effect of reliability worth including the effect of voltage sag is analyzed using customer interruption cost according to whether or not SFCL is installed.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.60-65
• /
• 2019

In this paper, the hybrid illumination system for effectively detecting surface defects in steel plate with lowcontrast, non-uniformity and featureless is designed based on illuminance uniformity. First of all, characteristics of steel plate defects were considered and typical inspection illumination system is implemented. Optimum illumination parameters for uniformly illuminating an inspection area in the typical illumination system are selected based on the illuminance uniformity and illuminance distribution measurement. The illuminance uniformity and illuminance distribution are measured using an illuminometer based on the arduino. Through illuminance distribution analysis of the typical illumination, an hybrid illumination is designed by fusing bi-directional illumination and coaxial illumination. The hybrid illumination showed higher uniformity ratio and illuminance distribution than the typical illuminations. The hybrid illumination system showed the ability to uniformly illuminate the entire inspection region of steel plate surface.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.549-558
• /
• 2017

DC distribution has several differences compared to AC distribution. DC distribution has a higher efficiency than AC distribution when distributing electricity at the same voltage level. Accordingly, power can be transferred further with low-voltage DC. In addition, power flow in a DC grid system is produced by only a voltage difference in magnitude. Owing to these differences, operation of a DC grid system significantly differs from that of an AC system. In this paper, the power flow problem in a bipolar-type DC grid with unbalanced load conditions is organized and solved. Control strategy of energy storage system on a slow time scale with power references obtained by solving an optimization problem regarding the DC grid is then proposed. The proposed strategy is verified with computer simulations.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.2
• /
• pp.58-66
• /
• 2001

This paper presents an application of a newly designed Adaptive Genetic Algorithm (AGA) to solve the Optimal Feeder Routing (OFR) problem for distribution system planning. The main objective of the OFR problem usually is to minimize the total cost that is the sum of investment costs and system operation costs. We propose a properly designed AGA, in this paper, which can handle the horizon-year expansion planning problem of power distribution network in which the location of substation candidates, the location and amount of forecasted demands are given. In the proposed AGA, we applied adaptive operators using specially designed adaptive probabilities. we also a Simplified Load Flow (SLF) technique for radial networks to improve a searching efficiency of AGA. The proposed algorithm has been evaluated with the practical 32, 69 bus test system to show favorable performance. It is also shown that the proposed method for the OFR can also be used for the network reconfiguration problem in distribution system.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.159-170
• /
• 2005

This paper presents the design and development of a scaled down physical model for power Distribution Automation (DA) system simulation. The developed DA system simulator is useful in providing hands-on experience to utility engineers / managers to familiarize with the DA system and gain confidence in managing the power distribution system from the computer aided distribution control center. The distribution automation system simulator can be effectively used to carry out further research work in this area. This also helps the undergraduate and graduate students to understands the power distribution automation technology in the laboratory environment. The developed DA simulator has become an integral part of a distribution automation lab in the Electrical Engineering Department at Indian Institute of Technology Kanpur in India.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1328-1334
• /
• 2015

A new system for evaluating the voltage management errors of distribution equipment is presented in this paper. The main concept of the new system is to use real distribution live-line voltage to evaluate and correct the voltage measurement data from distribution equipment. This new approach is suitable for a new Distribution Management System (DMS) which has been developed for a distribution power system due to the connection of distributed generation growth. The data from distribution equipment that is installed at distribution lines must be accurate for the performance of the DMS. The proposed system is expected to provide a solution for voltage measurement accuracy assessment for the reliable and efficient operation of the DMS. An experimental study on actual distribution equipment verifies that this voltage measurement accuracy assessment system can assess and calibrate the voltage measurement data from distribution equipment installed at the distribution line.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.123-130
• /
• 2017

Purpose - This research aims to examine the effect of e-business adoption on firm's growth and profitability in the distribution industry. The value added from the distribution industry acts as the cost of other industries. As the distribution industry develops, its stage becomes shorter and the distribution margin becomes smaller. Therefore, e-business is expected to have a different effect on the distribution industry than other industries. Research design, data and methodology - The previous research generally used e-business adoption as an independent variable and firm's performance as a dependent variable. This study elaborated the model using a dynamic panel model that includes the performance variable of the previous year as an independent variable. By employing system GMM (Generalized Method of Moments), the endogeneity problem in the dynamic panel model can be solved. For the analysis, I extracted the distribution companies as the raw data in the National Statistical Office's Business Activity Survey over the period 2006 to 2012. Results - The growth rate of firms adopting e-business was 0.299%p higher than that of the non-adopter. However, only ERP (Enterprise Resource Planning), KMS (Knowledge Management System) and SCM (Supply Chain Management) contributed positively to the growth rate. In the case of profitability, it was 0.04%p higher than the distribution companies that did not adopt e-business. ERP and LMS (Learning Management System) improve profitability, while SCM reduces profitability. Consequently, while ERP improves both growth and profitability, SCM improves growth but reduces profitability. In addition, KMS improves firm's growth only, and LMS does only profitability, showing that each e-business has a differentiated effect. Conclusions - Since the distribution industry has different characteristics from manufacturing and other service industries, the introduction of e-business may not guarantee the growth and profitability of distribution companies. Careful introduction considering the characteristics of the distribution industry is required. In particular, it is necessary to select an e-business meeting the characteristics and needs of a distribution company, and thereafter, it is required for the company's own efforts to internalize it within the system.

• IE interfaces
• /
• v.12 no.2
• /
• pp.222-236
• /
• 1999

This paper presents a design and implementation of an intelligent-integrated production-logistics systems. The situation considered here is that there are multiple manufacturing plants and multiple distribution centers. Effective distribution resource and production planning are required to reduce inventory cost and to avoid inventory shortage. We propose an intelligent forecasting scheme of each distribution centers, adaptive inventory replenishment planning, distribution resource planning, and integrated production planning system. In forecasting a huge number of on-line model identification is performed using neural network approximation capability. An efficient adaptive replenishment planning and distribution resource planning are also presented in connection with forecasting scheme. An appropriate production is also requested based on production lead-time and the results of distribution planning. Experimental simulations are presented to verify the proposed approach using real data.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.363-371
• /
• 1994

This thesis investigates an expert system(ES) to propose fault restoration plan by utilizing tree search strategies. In order to cope with an extensive amount of data and frequent breaker switching operations in distribution systems, the database of system configuration is constructed by using binary trees. This remarkably enhances the efficiency of search algorithm and makes the proposed ES easily adaptable to system changes due to switching operations. The rule-base is established to fully utilize the meris of tree-structured database. The inferring strategy is developed mainly based on the best-first search algorithm to increase computation efficiency. The proposed ES has been implemented to efficiently deal with large distribution systems by reducing computational burden remarkably compared with the conventional ES's.